Producte acabatview
This manual provides instructions for the safe and efficient use of your EDM Industrial Floor Fan. Please read this manual thoroughly before operating the fan and retain it for future reference.
Figure 1: EDM Industrial Black Floor Fan
The EDM Industrial Floor Fan is designed to provide powerful airflow for various environments. It features a robust construction, adjustable tilt, and multiple speed settings to suit your ventilation needs.
Instruccions de seguretat
- Desendolleu sempre el ventilador de la presa de corrent abans de netejar-lo, fer-ne el manteniment o moure'l.
- No introduïu els dits ni cap altre objecte a través de la reixeta quan el ventilador estigui en funcionament.
- Assegureu-vos que el ventilador estigui col·locat sobre una superfície estable i plana per evitar que bolqui.
- No feu funcionar el ventilador amb un cable o endoll danyat. Si el cable o l'endoll estan danyats, poseu-vos en contacte amb personal de servei qualificat.
- Keep the fan away from water or other liquids. Do not use it in wet or damp ambients.
- Aquest aparell no està pensat per ser utilitzat per persones (inclosos nens) amb capacitats físiques, sensorials o mentals reduïdes, o amb manca d'experiència i coneixements, tret que hagin rebut la supervisió o instruccions sobre l'ús de l'aparell per una persona responsable de la seva seguretat.
- Els nens han de ser supervisats per assegurar-se que no juguin amb l'aparell.
Configuració
Desembalatge
- Traieu amb cura el ventilador del seu embalatge.
- Check for any signs of damage during transit. If damage is found, do not operate the fan and contact the seller.
- Ensure all components are present. The fan typically comes pre-assembled with its stand.
Col·locació
- Col·loqueu el ventilador sobre una superfície ferma i anivellada.
- Ensure there is adequate space around the fan for proper air circulation. Do not block the air intake or exhaust.
- Position the fan away from curtains, drapes, or any objects that could be drawn into the fan blades.
- Connect the power cord to a suitable electrical outlet (220/240V, 50Hz).
Instruccions de funcionament
- Encès/apagat: Plug the fan into a grounded electrical outlet. Locate the control knob or buttons, usually on the rear or side of the fan. Turn the knob to the 'ON' position or press the power button.
- Ajust de la velocitat del flux d'aire: This fan offers 3 air flow rates. Rotate the control knob or press the speed buttons to select your desired speed (e.g., Low, Medium, High).
- Ajust de l'angle del ventilador: The fan head can be tilted to direct airflow. Loosen the adjustment knobs on either side of the fan frame, tilt the fan head to the desired angle, and then securely tighten the knobs.
- Apagar: To turn off the fan, rotate the control knob to the 'OFF' position or press the power button. Unplug the fan from the outlet when not in use for extended periods.
Manteniment
Neteja
- Desconnecteu sempre el ventilador abans de netejar-lo.
- Utilitzeu un suau, damp drap per netejar les superfícies exteriors del ventilador. No utilitzeu productes de neteja abrasius ni dissolvents.
- To clean the fan blades and grilles, you may need to remove the front grille. Refer to the diagram (if available) or gently unclip the grille. Carefully wipe the blades and grilles with a damp drap. Assegureu-vos que totes les peces estiguin completament seques abans de tornar a muntar i fer funcionar el ventilador.
- No submergiu el ventilador a l'aigua ni deixeu que l'aigua degoti a la carcassa del motor.
Emmagatzematge
- Quan no estigui en ús, guardeu el ventilador en un lloc fresc i sec.
- If possible, store it in its original packaging to protect it from dust and damage.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El ventilador no s'encén. | Not plugged in; power outlet not working; fan switch off; damaged power cord. | Ensure fan is securely plugged in. Test outlet with another device. Turn fan switch to 'ON'. Inspect power cord for damage; if damaged, do not use. |
| Flux d'aire baix. | Fan speed set too low; grilles blocked; dirty blades. | Increase fan speed. Ensure nothing is obstructing the grilles. Clean fan blades and grilles as per maintenance instructions. |
| Soroll inusual. | Loose parts; fan not on a level surface; foreign object in fan. | Check for any loose screws or components. Place fan on a stable, level surface. Unplug fan and carefully inspect for any foreign objects. |
If you encounter a problem not listed here or if the issue persists after attempting the solutions, please contact customer support.
Especificacions
| Característica | Detall |
|---|---|
| Model | Industrial Floor Fan 30 Cm |
| Marca | EDM |
| Poder | 45W |
| Diàmetre de la fulla | 30 cm |
| Caudals d'aire | 3 velocitats |
| Volum de cabal d’aire | 1860 m³/h |
| Voltage / Freqüència | 220/240V - 50Hz |
| Nombre de fulles | 3 |
| Color | Negre |
| Dimensions del paquet (L x W x H) | 20 cm x 20 cm x 10 cm |
| Pes del paquet | 3.3 kg |
Consells per a l'usuari
- For optimal cooling, position the fan to create a cross-breeze by placing it opposite a window or door.
- Use the lower speed settings for quieter operation and energy saving when maximum airflow is not required.
- Regularly check and clean the fan grilles to prevent dust buildup, which can reduce efficiency and potentially cause overheating.
Garantia i Suport
This product is covered by a standard manufacturer's warranty. For specific warranty terms, duration, or to obtain support, please contact the seller directly. Keep your purchase receipt as proof of purchase.
Seller: FERRETERIA TERRADO Store
For any inquiries or technical assistance, please reach out to the seller through the platform where the purchase was made.
