1. Introducció
The ID-Cooling IS-50X v3 is a high-performance, low-profile CPU cooler designed for compact systems such as HTPCs, ITX, and Small Form Factor (SFF) builds. With an overall height of 56mm, it provides efficient cooling while maintaining a small footprint. This manual provides detailed instructions for installation, operation, and maintenance to ensure optimal performance and longevity of your cooler.
2. Especificacions
Below are the detailed technical specifications for the ID-Cooling IS-50X v3 CPU Radiator:
| Característica | Especificació |
|---|---|
| Número de model | IS-50X V3 |
| Tipus de refrigerador | Pro baixfile |
| Overall Dimension (L×W×H) | 120×122×56 mm |
| Heatsink Size | 120×122×41 mm |
| Material | 5×Ф6mm Heatpipes (Direct Touch) + Aluminum Fin |
| Pes | 400 g |
| TDP | 130W |
| Dimensió del ventilador | 120×120×15 mm |
| Velocitat del ventilador | 500-2000RPM±10% (PWM) |
| Màx. Flux d'aire | 54.6CFM |
| Màx. Pressió estàtica | 1.53 mm H2O |
| Soroll | 31.2 dB(A) Màx. |
| Voltage | 12VDC |
| Vol. Operatiutage | 10.8 ～ 13.2VDC |
| Started Voltage | 7VDC |
| Corrent nominal | 0.18A |
| Entrada de potència | 2.16W |
| Tipus de rodament | Coixinet hidràulic |
| Connector | 4Pin PWM |
| Sòcols de CPU compatibles | Intel LGA1700/1200/1151/1150/1155/1156, AMD AM4/AM5 |
| Tubs de calor | 5 |
| Vida de fan | 40000 h |
| Quantitat de fulles | 9 |
| Certificació | CE |
| Origen | Xina continental |
3. Contingut del paquet
Si us plau, verifiqueu que tots els components siguin presents al vostre paquet:
- ID-Cooling IS-50X v3 CPU Cooler Unit (Heatsink and Fan)
- Intel Mounting Brackets (for LGA1700, LGA1200, LGA115x)
- AMD Mounting Brackets (for AM5, AM4)
- Cargols i separadors de muntatge
- Pasta tèrmica
- Manual d'usuari (aquest document)
4. Configuració i instal·lació
Follow these steps to properly install your ID-Cooling IS-50X v3 CPU cooler:
- Prepareu el vostre sistema: Ensure your computer is powered off and unplugged. Remove the side panel of your PC case to access the motherboard.
- Identify CPU Socket: Determine your CPU socket type (Intel LGA1700/1200/115x or AMD AM5/AM4).
- Seleccioneu el maquinari de muntatge: Choose the appropriate mounting brackets and screws for your specific CPU socket from the package.
- Install Backplate (if applicable): For some Intel sockets, a backplate may be required. Install it on the rear of the motherboard, aligning the holes.
- Fixeu els separadors: Secure the correct standoffs to the motherboard's CPU cooler mounting holes.
- Aplicar pasta tèrmica: Apply a small, pea-sized amount of thermal paste to the center of your CPU's Integrated Heat Spreader (IHS). Do not spread it manually; the pressure from the cooler will distribute it.
- Posició del refrigerador: Carefully place the heatsink assembly onto the CPU, ensuring the mounting holes on the cooler align with the standoffs.
- Refrigerador segur: Attach the mounting brackets to the heatsink and secure them to the standoffs using the provided screws. Tighten the screws in a diagonal pattern (e.g., top-left, bottom-right, top-right, bottom-left) gradually until snug. Do not overtighten, as this can damage the CPU or motherboard.
- Connectar el cable del ventilador: Connect the 4-pin PWM fan connector to the CPU_FAN header on your motherboard.
- Comprovar la liquidació: Ensure there is adequate clearance around the cooler, especially for RAM modules. The fan brackets are adjustable to accommodate RAM heights up to 44mm or offer unlimited compatibility with specific fan positioning.
5. Instruccions de funcionament
The ID-Cooling IS-50X v3 operates automatically once installed and connected to your motherboard's CPU_FAN header. The 120mm fan supports Pulse Width Modulation (PWM), allowing your motherboard to dynamically adjust its speed based on CPU temperature. This ensures optimal cooling performance when needed and quieter operation during lighter loads.
- Velocitat del ventilador: The fan operates within a range of 500-2000 RPM (±10%).
- Nivell de soroll: The maximum noise level is 31.2dB(A), designed for low-noise operation.
- Connexió d'alimentació: Ensure the 4-pin PWM connector is securely attached to the CPU_FAN header on your motherboard.
6. Manteniment
Regular maintenance is crucial for ensuring the optimal performance and longevity of your CPU cooler.
- Eliminació de pols: Periodically (e.g., every 3-6 months), use compressed air to clean dust from the heatsink fins and fan blades. Ensure the fan is held stationary during cleaning to prevent damage to the bearing.
- Pasta tèrmica: The thermal paste should be reapplied if the cooler is ever removed from the CPU. Clean off old thermal paste from both the CPU's IHS and the cooler's base using isopropyl alcohol before applying a new, thin layer of thermal paste.
- Inspecció del ventilador: Occasionally check the fan for any signs of wear, damage, or unusual noises. If the fan is damaged, it may need to be replaced.
7. Solució De Problemes
If you encounter issues with your CPU cooler, refer to the following troubleshooting tips:
- Temperatures altes de la CPU:
- Ensure the cooler is securely mounted and making full, even contact with the CPU.
- Verifiqueu que la pasta tèrmica s'ha aplicat correctament i uniformement.
- Check if the fan is spinning freely and connected to the CPU_FAN header.
- Ensure adequate airflow within your PC case. Poor case ventilation can lead to higher CPU temperatures.
- Soroll excessiu del ventilador:
- Check for dust buildup on the fan blades or heatsink, which can cause imbalance and noise.
- Ensure the fan is securely attached and not vibrating against other components or the heatsink.
- Verify fan settings in your motherboard's BIOS/UEFI or operating system software; adjust fan curves if necessary to find a balance between cooling and noise.
- Problemes de compatibilitat:
- This cooler supports Intel LGA1700, LGA1200, LGA115x, and AMD AM5, AM4 sockets. It is NOT compatible with LGA2011 sockets.
- The maximum TDP supported is 130W. Ensure your CPU's TDP does not exceed this limit for optimal cooling performance.
8. Consells d'usuari
- Compatibilitat de casos: Always consider the overall height of the cooler (56mm) when planning your build, especially for small form factor cases (e.g., A4 cases) where space is limited.
- Liquidació de RAM: Utilize the adjustable fan brackets to ensure maximum RAM compatibility, particularly with taller memory modules. Refer to the installation diagrams for optimal fan positioning.
- Optimització del flux d'aire: For the best cooling performance, ensure your PC case has good overall airflow. Proper intake and exhaust fan configurations can significantly assist the CPU cooler in dissipating heat effectively.
- Aplicació de pasta tèrmica: While a pea-sized dot is common, some users prefer a line or cross pattern for even spread, especially on larger CPUs. Consistency is key.
9. Garantia i Suport
The ID-Cooling IS-50X v3 CPU Radiator comes with a manufacturer's warranty. For specific warranty terms, duration, and conditions, please refer to the warranty information provided with your product packaging or visit the official ID-Cooling weblloc.
For warranty claims, technical assistance, or product support, please contact the manufacturer or your point of purchase. It is recommended to keep your proof of purchase (receipt or invoice) as it may be required for warranty validation.
