1. Producte acabatview
The Dooya KC146 is a 2-channel RF433 remote controller designed for use with Dooya RF433 fixed code curtain and tubular motors. It allows for independent control of two separate motors or channels.
Característiques principals:
- 2 independent control channels.
- RF433.92MHz frequency.
- Compatible with Dooya RF433 fixed code motors (e.g., DT52E, KT, DT82TN, KT320E, DT360E).
- Not compatible with RF433 rolling code motors.
- Powered by a 27A 12V battery.
2. Configuració
2.1 Instal·lació de la bateria
The KC146 remote controller requires one 27A 12V battery. Follow these steps to install or replace the battery:
- Slide open the battery cover located on the back of the remote control.
- Insert the 27A 12V battery, ensuring the positive (+) and negative (-) terminals match the indicators inside the compartment.
- Feu lliscar la coberta de la bateria al seu lloc fins que faci un clic de manera segura.
2.2 Pairing with Motors
The KC146 remote controller must be paired with your Dooya RF433 fixed code motors. The pairing process varies slightly between tubular motors and open-close curtain motors.
2.2.1 Pairing with RF433 Tubular Motor (Fixed Code)
- Turn on the power supply to the tubular motor. The motor will rotate forward and backward once, then emit a long "DI" sound.
- Press the P2 button on the KC146 remote once. The motor will rotate forward and backward once, then emit a "DI" sound.
- Press the P2 button on the KC146 remote once again. The motor will emit another "DI" sound.
- Press any of the 'Left' (open) or 'Right' (close) buttons on the KC146 remote once. The motor will rotate forward and backward once, then emit multiple "DI" sounds, indicating successful pairing.
2.2.2 Pairing with RF433 Open-Close Curtain Motor (Fixed Code)
- Turn on the power supply to the curtain motor.
- Press and hold the pair button on the motor for 2 seconds.
- When the motor's indicator flickers once, release the button.
- Press the P2 button on the KC146 remote once. The motor's indicator will flicker slowly.
- Press the P2 button on the KC146 remote once again. The motor's indicator will flicker 5 times quickly, indicating successful pairing.
3. Instruccions de funcionament
The KC146 remote controller features dedicated buttons for controlling your motors. It is a 2-channel remote, meaning it can control two motors or groups of motors independently.
Each channel typically has three buttons: Open, Stop, and Close. Refer to the specific motor's instructions for detailed button assignments if different.
- Open Button (Left Arrow): Activates the motor to open the curtain or blind.
- Stop Button (Circle): Stops the motor's current operation.
- Close Button (Right Arrow): Activates the motor to close the curtain or blind.
To control a specific channel, ensure the remote is set to that channel (if applicable, some remotes have a channel selector or the P2 buttons define the channel during pairing).
4. Manteniment
- Substitució de la bateria: Replace the 27A 12V battery when the remote's range decreases significantly or it stops responding. Refer to Section 2.1 for battery installation steps.
- Neteja: Netegeu el comandament a distància amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
- Emmagatzematge: Guardeu el comandament a distància en un lloc sec, allunyat de la llum solar directa i de temperatures extremes.
- Avoid Moisture and Impact: Do not expose the transmitter to moisture or physical impact, as this can affect its lifespan and functionality.
- Reciclatge de bateries: Please dispose of used batteries responsibly according to local regulations.
5. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Remote not responding to motor. | Bateria baixa o esgotada. Remote not paired with motor. Motor power off. |
Replace battery (27A 12V). Re-pair the remote with the motor (refer to Section 2.2). Ensure motor has power. |
| Rang de funcionament reduït. | Bateria feble. Interferències d'altres dispositius de radiofreqüència. |
Substituïu la bateria. Move remote closer to the motor or away from other electronic devices. |
| Motor responds incorrectly (e.g., opens instead of closes). | Motor direction needs adjustment. | Refer to your motor's specific manual for direction reversal instructions. |
6. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | Dooya Sunflower KC146 |
| Freqüència RF | 433.92 MHz ± 100 kHz |
| Canals | 2 (controls 2 motors separately) |
| Tipus de bateria | 27A 12V |
| Potència d'emissió | 10 milliwatts |
| Temperatura de treball | -10 °C a 50 °C |
| Distància d'emissió | Approx. 30m (open area, through two walls) |
| Compatibilitat | Dooya RF433 Fixed Code motors only |
| Certificació | CE |
| Origen | Xina continental |
7. Consells d'usuari
- For optimal performance, ensure a clear line of sight between the remote and the motor, especially in environments with potential RF interference.
- If controlling multiple motors, consider labeling your remote channels to easily identify which motor each channel controls.
- Always keep a spare 27A 12V battery on hand to avoid interruptions in control.
8. Garantia i Suport
For any issues, technical support, or warranty inquiries regarding your Dooya KC146 remote controller, please contact your original seller or retailer. An English user manual can often be provided by the seller via email upon request.
