1. Producte acabatview
The Herdio HMA-BTB01 is a compact Bluetooth audio amplifier designed to connect Bluetooth-enabled devices to low impedance speakers. It features a built-in power amplifier and an auxiliary input for wired connections. Its small size makes it suitable for installation in various spaces, including ceiling voids.
2. Contingut del paquet
Assegureu-vos que tots els articles estiguin presents i en bon estat en desempaquetar-los:
- 1 x Herdio HMA-BTB01 Bluetooth & Aux Mini Ampmés viu
- 1 x 12V Power Supply Unit (PSU) with regional plug (EU/US/UK/AU plug, as selected)
3. Instruccions de configuració
Follow these steps to set up your Herdio HMA-BTB01 ampmés viu:
3.1 Col·locació
- Install the Bluetooth amplifier in a dry location, such as a loft space or within a wall cavity. Avoid areas with high humidity or direct exposure to water.
3.2 Esquema de cablejat
3.3 Connectar altaveus
El amplifier supports up to 4 speakers (4 or 8 Ohms). Connect your passive speakers to the screw terminals:
- SPK L+ / SPK L-: For Left Channel Speaker
- SPK R+ / SPK R-: For Right Channel Speaker
3.4 Connexió de potència
Connect the supplied 12V PSU to the 'Power Jack' input on the amplifier. Ensure the correct regional plug is used.
3.5 Entrada auxiliar
For wired audio sources, connect a 3.5mm audio cable from your device to the 'AUX IN' jack on the ampmés viu.
3.6 TWS Switch
The TWS (True Wireless Sound) switch is located on the side of the amplifier. This switch is used when pairing two amplifiers together for a true stereo surround sound experience. Ensure the TWS switch is in the 'ON' position on both amplifiers before attempting to pair them.
4. Instruccions de funcionament
4.1 Connexió Bluetooth
Per connectar el dispositiu mitjançant Bluetooth:
- Assegureu-vos el ampel lifier està encès.
- Al dispositiu amb Bluetooth (telèfon intel·ligent, tauleta, etc.), cerqueu els dispositius Bluetooth disponibles.
- Select the device named "Herdio" from the list. No password is required for connection.
- Once connected, audio from your device will play through the speakers.
The Bluetooth connection has a range of up to 50 feet (approximately 15 meters).
4.2 Ús de l'entrada auxiliar
If you prefer a wired connection or your device does not have Bluetooth, connect it using a 3.5mm audio cable to the 'AUX IN' port. The amplifier will automatically switch to the auxiliary input when a signal is detected.
4.3 TWS (True Wireless Sound) Pairing
To achieve true stereo sound with two Herdio HMA-BTB01 ampelevadors:
- Assegureu-vos tots dos amplifiers are powered on and their TWS switches are set to 'ON'.
- Pair your Bluetooth device to one of the amplificadors. Això amplifier will act as the master unit.
- Els dos amplifiers will automatically pair with each other, creating a stereo pair.
4.4 Compatibilitat
The Herdio HMA-BTB01 amplifier is compatible with various devices, including Amazon Alexa and Echo products, allowing for seamless integration into smart home audio setups.
5. Manteniment
Per garantir la longevitat i el rendiment òptim del vostre ampmés viu:
- Keep the unit in a dry environment. Avoid exposure to moisture, rain, or extreme temperatures.
- Netegeu l'exterior amb un drap suau i sec. No utilitzeu productes químics agressius ni netejadors abrasius.
- Assegureu-vos una ventilació adequada al voltant de la unitat per evitar el sobreescalfament.
6. Solució De Problemes
- Sense sortida de so:
- Comproveu si el amplifier is powered on and the power adapter is securely connected.
- Verify speaker connections are correct (SPK L+/-, SPK R+/-).
- Ensure your audio source (Bluetooth device or Aux cable) is properly connected and playing audio.
- Check the volume level on both your audio source and the ampmés viu.
- Problemes de vinculació de Bluetooth:
- Assegureu-vos el amplifier is within the 50-foot Bluetooth range of your device.
- Confirm the Bluetooth name "Herdio" appears on your device's scan list. No password is required.
- If using TWS, ensure both amplifiers have the TWS switch 'ON' before pairing your device to one of them.
- Amplifier makes noise when Bluetooth disconnects:
- This is normal behavior. When a Bluetooth device disconnects, the amplifier may emit a sound as it enters a search mode for new connections.
7. Especificacions
| Característica | Especificació |
|---|---|
| Nom de marca | Herdio |
| Número de model | HMA-BTB01 |
| Canals | 4 |
| Potència màxima per canal | 6W |
| Total Speaker Output | Up to 4 x 80W (at 4 or 8 Ohms) |
| Versió Bluetooth | 4.2 |
| Nom de Bluetooth | Herdio |
| Interval Bluetooth | Fins a 50 peus (15 metres) |
| Opcions d'entrada | Bluetooth, AUX IN (3.5mm Jack) |
| Font d'alimentació | 12V PSU (Supplied) |
| Plug Specifications | EU/US/UK/AU (as selected) |
| Material | Plàstics |
| Color | Negre |
| Pes | 0.5 kg |
| Certificació | CE |
| Origen | Xina continental |
8. Consells d'usuari
- For a true stereo experience, utilize the TWS function by pairing two Herdio amplifiers. Remember to turn on the TWS switch on both units before pairing.
- The Bluetooth connection does not require a password, simply select "Herdio" from your device's Bluetooth list.
- Assegureu-vos sempre el amplifier is installed in a dry, well-ventilated area to prevent damage and ensure optimal performance.
9. Garantia i Suport
For any issues or support inquiries, please contact your retailer or the Herdio customer service. Keep your purchase receipt for warranty claims.
