Introducció
This manual provides detailed instructions for the DWIN 7-inch 800x480 TFT LCD HMI Display Module, available in both resistive touch (DMG80480Y070_02NR) and non-touch (DMG80480Y070_02NN) versions. It covers hardware introduction, specifications, setup, operation, and troubleshooting to help you effectively integrate and use your display module.
Especificacions
Propietats generals del producte
- Número de model: DMG80480Y070_02NN/NR
- Tipus: TFT
- Nom de marca: DWIN
- Origen: Xina continental
- està_personalitzat: Sí
Especificacions de visualització
Image: Detailed table outlining display specifications including color, panel type, viewing angle, active area, resolution, backlight, and brightness.
| Item | Paràmetre | Descripció |
|---|---|---|
| Color | 262K (262144) colors | 18 bit color 6R6G6B |
| Tipus de panell | TV-TN | TN TFT LCM , normal viewangle de ing |
| Viewangle ing | 70/70/40/30 (L / R / U / D) | - |
| Àrea Activa | 154.1mm (W) × 85.9mm (H) | 800 x 480 píxels |
| Resolució | 800 x 480 | Support 0°/90°/180°/270° rotated display |
| Llum de fons | LED | ≥ 10000H (Continuous working with maximum brightness, time of brightness halves) |
| Brillantor | 200nit (NN) / 150nit (NR) | TA system: 64 levels adjustment; DGUSⅡ system: 100 levels adjustment (It's not recommend to set brightness to 1%~30% of the maximum, which may lead to flicker) |
Electrical & Interface Specifications
Image: Detailed table outlining voltage, current, reliability test conditions, and interface specifications.
| Item | Condicions | Min | Tip | Màx | Unitat |
|---|---|---|---|---|---|
| Potència Voltage | - | 7.0 | 12.0 | 15.0 | V |
| Corrent de funcionament | VCC = +12V, retroil·luminació activada | - | 190 | - | mA |
| VCC = +12V, retroil·luminació apagada | - | 60 | - | mA | |
| Test de fiabilitat | |||||
| Temperatura de treball | 60%RH at 12V voltage | -10 | 25 | 60 | ℃ |
| Temperatura d'emmagatzematge | - | -20 | 25 | 70 | ℃ |
| Humitat de treball | 25℃ | 10% | 60% | 90% | RH |
| Interfície | |||||
| Velocitat de transmissió | UART1 | 3150 | 115200 | 3225600 | bps |
| Vol. De sortidatage (TXD) | Sortida 1, Iout = -4mA | 2.7 | 3.2 | - | V |
| Sortida 0, Iout = 4mA | - | 0.1 | 0.4 | V | |
| Entrada Voltage (RXD) | Entrada 1 | 2.4 | 3.3 | 5.5 | V |
| Entrada 0 | 0 | - | 1.0 | V | |
| Mode UART | Mode is determined by Jumper: ON=N81, 5V TTL/COMS; OFF=N81, RS232. | ||||
| Interfície d'usuari | 8Pin_2.0mm Socket | ||||
| Interfície USB | Cap | ||||
| Interfície de targeta SD | Yes (Micro SDHC(TF) card /FAT32 Format) | ||||
Especificacions de la memòria
| Item | Valor típic | Característiques | Typ value | Unitat | Descripció |
|---|---|---|---|---|---|
| FLASH | 16 Mbytes | Space of Font | 4-12 | Mbytes | A single font of 256Kbytes, store font, icon libraries, and other binary files |
| Picture Storage (.ICL file) | 12-4 | Mbytes | JPEG format (Picture quantity relate to JPEG size, size of a single JPEG image file should not exceed 248 Kbytes) | ||
| RAM | 128Kbytes | Variable Storage Space | - | - | Data is not saved when power down |
| Ni Flash | 512 KB | Base de dades d'usuaris | - | - | Data is not saved when power down |
Dimensions físiques
Image: CAD drawing showing the physical dimensions of the display module.
- Overall Dimensions (DMG80480Y070_02NN/NR): 189.1mm (W) × 106.3mm (H) × 14.5mm (T)
- Net Weight (DMG80480Y070_02NN): 210 g
- Net Weight (DMG80480Y070_02NR): 250 g
Instruccions de configuració
S'ha acabat el maquinariview
Image: Diagram illustrating the various interfaces on the display module, including SD card interface, T5L ASIC, User interface, PGT05 interface, Buzzer, TP interface, and LCM interface.
- Interfície de targeta SD: For Micro SDHC(TF) card, FAT32 Format supported.
- T5L ASIC: Integrated Application Specific Integrated Circuit for display control.
- Interfície d'usuari: 8Pin_2.0mm Socket for communication (TX, RX, GND included).
- PGT05 Interface: Programming and debugging interface.
- Zumbador: Per a comentaris d'àudio.
- TP Interface: Touch Panel interface (for resistive touch versions).
- LCM Interface: Liquid Crystal Module interface.
Passos de configuració inicials
- Software Platform Check: Before physical assembly, identify the software platform of your specific screen model as mentioned in the product datasheet.
- Desenvolupament: Use the appropriate development SDK (Software Development Kit) for your platform to create or customize the user interface and functionality.
- Program Update: Update the display module with your developed software program. This typically involves loading the program onto an SD card and inserting it into the module, or using the PGT05 interface.
- Prova: Thoroughly test the display module with your program to ensure all functions operate as expected.
- Muntatge: Once testing is complete and satisfactory, the display module can be assembled into your machine or application.
Video: Demonstration of connecting the display module and basic UI interaction, including brightness adjustment and menu navigation.
Instruccions de funcionament
The DWIN HMI display module is designed for intuitive graphical user interface (GUI) operation. The specific functions and interactions will depend on the application program loaded onto the module. However, general operating principles include:
Basic UI Interaction
- Control tàctil: For resistive touch panel versions (DMG80480Y070_02NR), interact directly with the screen using a finger or stylus.
- Navegació: Tap on icons or buttons to navigate through different screens or activate functions.
- Entrada de dades: Utilize on-screen keypads or input fields for numerical or textual data entry.
- Ajust de brillantor: Adjust screen brightness via the settings menu, typically offering 64 (TA system) or 100 (DGUSⅡ system) levels.
Funcional acabatview
Image: Diagram illustrating the functional capabilities (Inmage Animation, Basic Graphic, QR Code, Roll Text, Data Input & Display, Touch Control) and working principle of the Smart TFT Display with CPU communicating via UART with an MCU controller.
- Basic Graphic Display: Render various graphical elements and layouts.
- Image Animation: Support for displaying animated images.
- QR Code Display: Ability to show QR codes for various purposes.
- Roll Text: Display scrolling text.
- Data Input & Display: Facilitate user input and display of dynamic data.
- Control tàctil: Enable interactive control through touch (for resistive touch models).
Principi de funcionament
The DWIN Smart TFT Display with its integrated CPU communicates with an external Microcontroller Unit (MCU) via UART (Universal Asynchronous Receiver-Transmitter) instructions. The MCU then controls various equipment based on the commands received from the display module.
Manteniment
- Neteja de la pantalla: Utilitzeu un drap suau i sense pelusa lleugerament dampened with water or a specialized screen cleaner. Avoid harsh chemicals, abrasive materials, or excessive moisture.
- Condicions ambientals: Operate and store the module within the specified working and storage temperature/humidity ranges to ensure longevity.
- Actualitzacions de firmware: Periodically check the DWIN developer forum or official website for firmware updates that may improve performance or add new features. Follow the provided instructions carefully for any updates.
Resolució de problemes
- Sense pantalla/alimentació:
- Ensure the power supply is connected correctly and provides the specified voltage (7.0V to 15.0V, typical 12.0V).
- Check all cable connections, especially the 8Pin_2.0mm User Interface socket, for secure fit.
- Verify that the backlight is not set to minimum brightness or turned off in the settings.
- Touch Screen Unresponsive (Resistive Touch Models):
- Ensure the TP interface cable is securely connected.
- Calibrate the touch screen if the application supports it.
- Verify that the correct firmware for the resistive touch version (DMG80480Y070_02NR) is loaded.
- Problemes de comunicació (UART):
- Check the UART mode jumper setting (ON=N81, 5V TTL/COMS; OFF=N81, RS232) matches your MCU's configuration.
- Verify the baud rate settings on both the display module and your MCU are identical.
- Ensure TX and RX lines are correctly connected (TX of one device to RX of the other).
- Software/Firmware Related Problems:
- If the display is not functioning as expected after initial setup, ensure the program has been correctly updated to the LCD module.
- Refer to the DWIN developer forum or technical support for specific software-related issues.
Consells per a l'usuari
- Pre-Assembly Programming: Always update the display module with your application program and test it thoroughly before integrating it into your final product. This prevents potential issues during assembly.
- Utilize DWIN GUI Software: Avançanttage of the free and easy-to-use DWIN GUI software for designing your user interface. No complex coding is needed for GUI design and interaction, simplifying development.
- SDK Selection: Ensure you use the correct development SDK corresponding to the software platform of your specific DWIN LCD module. Refer to the datasheet for this information.
- Technical Support Resources: DWIN offers comprehensive online technical support. Don't hesitate to use their WhatsApp, email, developer forum, or official website for assistance with development or troubleshooting.
Garantia i Suport
DWIN provides comprehensive technical support for its products. For any inquiries, after-sales service, or technical assistance, please use the following contact methods:
- WhatsApp Technical Support: +86 19192113166 (Working hours: PST 16:30-6:00 every day)
- Correu electrònic d'atenció al client: dwinhmi@dwin.com.cn
- Fòrum de desenvolupadors DWIN: https://forums.dwin-global.com/ (For documents, software, demo downloads, FAQs, and community exchange)
- Internacional Weblloc: https://www.dwin-global.com/
- Development Tool Page: https://www.dwin-global.com/tool-page/
- Development Guide: https://www.dwin-global.com/development-guide/
- DGUS Video Tutorial: https://www.dwin-global.com/t5l-dgus-v7-6-video-tutorial/
If you have not solved your problem through the above resources, please send emails to: dwinhmi@dwin.com.cn
