1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your new Fingerprint Lock. This smart keyless padlock is designed to enhance the security of your furniture, such as cabinets, wardrobes, closets, and drawers, in both home and office environments. It features a precise fingerprint reader and a convenient USB emergency power option.
2. Especificacions
| Característica | Detall |
|---|---|
| Material | ABS |
| Color | Negre |
| Mida (L x A x A) | Aprox. 10.5 x 9.5 x 4 cm (4.13 x 3.74 x 1.57 polzades) |
| Keys Included | No |
| Número de model | --- |
| Origen | Xina continental |
| Certificació | Cap |
3. Contingut del paquet
El paquet inclou els components següents:
- 1 Piece Fingerprint panel
- 1 Piece Locking body
- 1 Piece Fixing accessory
- 2 Pieces Double panel heightening accessories
- 2 Pieces Mounting positioning plate
- 1 Piece Locking buckle
- 1 Piece Connecting cable
- 7 Pieces Mounting screws
- 1 Piece Reset pointer
4. Configuració i instal·lació
Follow these steps to install your Fingerprint Lock:
- Elimina el bloqueig existent: If applicable, remove the existing key lock from your furniture. The Fingerprint Lock is designed to easily replace existing key locks.
- Posicionament: Place the provided mounting positioning plate over the existing hole or desired installation area to mark the screw points.
- Install Fingerprint Panel: Secure the fingerprint panel to the exterior of the furniture using the appropriate screws. Ensure the panel is flush and stable.
- Install Locking Body: Attach the locking body to the interior of the furniture, aligning it with the fingerprint panel.
- Connectar el cable: Connect the data cable from the fingerprint panel to the locking body.
- Components segurs: Use the remaining screws and fixing accessories to fully secure both the fingerprint panel and the locking body. For double-layer panels, use the heightening accessories as needed.
Guia de vídeo d'instal·lació
Video 1: Step-by-step installation and fingerprint setup guide.
5. Instruccions de funcionament
5.1 Fingerprint Registration
- Locate the reset pinhole on the locking body (usually on the side or back).
- Insert the reset pointer into the pinhole and press and hold for 2 seconds.
- The indicator light on the fingerprint panel will activate. Place your finger on the sensor.
- Lift and place your finger on the sensor 5 consecutive times. After the 5th successful input, you will hear a longer beep, and the green light will stay on for 2 seconds, indicating successful registration.
5.2 Desbloqueig
To unlock, simply place a registered finger on the fingerprint sensor. The lock will disengage, allowing you to open the furniture.
5.3 Energia d'emergència
In case the internal battery runs low, you can use the USB Emergency Plug feature. Connect a standard USB power source (e.g., power bank, USB charger) to the USB port on the fingerprint panel to temporarily power the lock and unlock it.
6. Manteniment
- Neteja: Wipe the fingerprint sensor and lock body with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the surface or electronic components.
- Bateria: The lock operates on an internal battery. While specific battery details are not provided, ensure the lock is charged periodically using the USB port to prevent power loss.
- Resetting All Fingerprints: If you need to clear all registered fingerprints, insert the reset pointer into the pinhole and press and hold for 5 seconds. This will factory reset the fingerprint data.
7. Solució De Problemes
- Empremta digital no reconeguda:
- Assegureu-vos que el vostre dit estigui net i sec.
- Prova de reposicionar el dit sobre el sensor.
- Re-register your fingerprint if the issue persists.
- El bloqueig no respon:
- Check the battery level. Use the USB Emergency Plug if the battery is depleted.
- Ensure the connecting cable between the panel and the locking body is securely attached.
- Cannot Register Fingerprint:
- Ensure you are pressing the reset pin for the correct duration (2 seconds for registration).
- Make sure to input your fingerprint 5 consecutive times as instructed.
8. Consells d'usuari
- For optimal fingerprint recognition, ensure your fingers are clean and dry before use.
- Periodically check the lock's battery status and recharge it via the USB port to avoid being locked out.
- Keep the reset pointer in a safe, easily accessible location, but not inside the locked furniture.
- Consider registering multiple fingerprints (e.g., from different fingers or trusted family members) for convenience and backup.
9. Garantia i Suport
Specific warranty information for this product is not provided in the available documentation. For any warranty claims, technical support, or further assistance, please contact the seller directly through your purchase platform.
