Manual d'usuari dels auriculars sense fil Mpow Flame Solo

Producte acabatview

The Mpow Flame Solo Wireless Earbuds are designed for active lifestyles, featuring IPX7 waterproofing, Environmental Noise Cancellation (ENC) for calls, and a secure ear hook design. This manual provides instructions for setup, operation, maintenance, and troubleshooting.

Contingut del paquet

• 1 x Mpow Flame Solo Wireless Earbuds
• 1 x funda de càrrega
• 1 x cable de càrrega USB-C
• 3 Pair x Soft Eartips (XS/S/L, size M is preinstalled on earbuds)

Image: Mpow Flame Solo Earbuds and Charging Case

Instruccions de configuració

1. Càrrega inicial

• Before first use, remove the insulating film from the charging pins on both earbuds.
• Place the earbuds into the charging case and connect the USB-C charging cable to fully charge the device.
• Ensure the earbuds and charging case are fully charged before initial use for optimal battery performance.

Image: Charging case with earbuds and USB-C cable, illustrating fast charging capabilities.

2. Emparellament amb el dispositiu

1. Take both headsets out of the charging case. The lights on both headsets will flash red and blue.
2. After 3-5 seconds, the red and blue lights on the right earbud will continue to flash, while the light on the left earbud will go out. This indicates that the two earbuds are successfully paired with each other.
3. On your phone or Bluetooth-enabled device, search for the Bluetooth name "Flame Solo".
4. Select "Flame Solo" to connect. Once connected, the lights on both earbuds will go out.

Image: Earbuds being taken out of charging case, ready for connection.

3. Posar-se els auriculars

The Mpow Flame Solo earbuds feature moldable ear hooks for a secure and comfortable fit, especially during strenuous activities. Adjust the ear hooks to fit snugly around your ears, then insert the earbuds into your ear canals and rotate them to a comfortable, stable position.

Image: Illustration of how to properly wear the ear hook earbuds for maximum comfort and stability.

Instruccions de funcionament

1. Controls de botons

The earbuds are equipped with multifunctional physical buttons for easy control of music playback and calls.

Image: Visual guide to the earbud button functions for calls and music playback.

• Answer/Reject/Hang up Calls: Use the designated button for call management.
• Reproduir/pausar música: Press the button to play or pause audio.
• Omet les pistes: Use the buttons to navigate to the next or previous track.
• Ajustar el volum: Control the volume directly from the earbuds.
• Silencia/Activa el silenci: Mute or unmute the microphone during calls.
• Activa Siri/Assistent de veu: Access your device's voice assistant.

2. Mode Mono

Both earbuds can be used independently in mono mode. This means either the left or right earbud can function as the primary earbud and connect directly to your device, allowing you to use one earbud while the other is charging or stored.

Manteniment

1. Impermeabilització

The Mpow Flame Solo earbuds feature an IPX7 waterproof rating and a sweat-proof nano-coating. This makes them suitable for sports and workouts, protecting against sweat, accidental splashes, and light rain. Do not submerge the earbuds in water for extended periods or expose them to high-pressure water jets.

Image: Earbuds submerged in water, demonstrating IPX7 waterproof capability.

2. Neteja

Regularly clean your earbuds and charging case to ensure optimal performance and hygiene. Use a soft, dry, lint-free cloth. For stubborn dirt, a slightly damp cloth can be used, but ensure all components are completely dry before placing them back in the charging case or using them.

Resolució de problemes

1. Earbuds Fail to Reconnect

If your earbuds fail to reconnect to your device, try the following reset procedure:

1. Turn off Bluetooth on your device (phone, tablet, etc.).
2. Traieu els dos auriculars de la caixa de càrrega.
3. Simultaneously press and hold both the volume up and volume down buttons on tampoc earbud for 3 seconds. This should reset the earbuds.
4. Place the earbuds back in the case, then take them out again and attempt to pair them with your device as per the "Pairing with Your Device" instructions.

2. General Connectivity Issues

Ensure your device's Bluetooth is enabled and within range. The Mpow Flame Solo is compatible with all Bluetooth-enabled devices, including Android/iOS cellphones, tablets, computers, and TVs. If issues persist, try restarting both your device and the earbuds.

Especificacions

Consells per a l'usuari

• Estoig de càrrega: The charging case for the Mpow Flame Solo earbuds does not support wireless charging; it charges via the provided USB-C cable.
• Connexió multidispositiu: While both earbuds can function independently as primary earbuds, the Mpow Flame Solo is designed to connect to one Bluetooth device at a time. Simultaneous connection to two different devices (e.g., phone and laptop) is not supported.
• Ajust segur: Avançanttage of the moldable ear hooks to achieve a secure and comfortable fit, especially during high-intensity activities. Experiment with the different eartip sizes to find the best seal for sound quality and stability.

Garantia i suport

For warranty information, technical support, or any product-related inquiries, please contact the seller or MPOW customer service directly. Refer to your purchase documentation for specific warranty terms and contact details.