Introducció
This manual provides instructions for the installation, maintenance, and troubleshooting of the FAGOR Hood Light Cap, model EDESA AF2647B KE0001537. This light cover is a replacement part designed for various range hood models from brands such as Fagor, Edesa, Aspes, Brandt, Balay, Bosch, LG, Lynx, Whirlpool, and IKEA. Please read this manual carefully before attempting any installation or maintenance.
Producte acabatview
The FAGOR Hood Light Cap is a transparent cover designed to protect the light bulb in your range hood while diffusing light. It measures approximately 155mm in length and 50mm in width. This part is crucial for maintaining the functionality and aesthetic of your kitchen appliance.
Configuració i instal·lació
Before beginning, ensure the range hood is turned off and disconnected from the power supply to prevent electrical shock.
- Preparació: Locate the existing light cover on your range hood. If replacing a broken cover, carefully remove any remaining pieces.
- Eliminació (si escau): Depending on your range hood model, the old light cover may be held in place by clips, tabs, or screws. Gently unclip or unscrew the old cover.
- Installation of New Cap: Align the new FAGOR Hood Light Cap with the designated slot or clips in your range hood.
- Assegureu la tapa: Press firmly or slide the cap into place until it clicks or is securely seated. Ensure all clips or tabs are engaged. Do not force the cap, as this may cause damage.
- Prova: Reconnect the range hood to the power supply and turn on the light to ensure the cap is properly installed and the light functions correctly.
If you encounter difficulty, consult your specific range hood's user manual for detailed instructions on light cover replacement.
Instruccions de funcionament
The FAGOR Hood Light Cap is a passive component. Once correctly installed, its operation is integrated with your range hood's lighting system. Simply use your range hood's light switch as you normally would.
Manteniment i cura
- Neteja: To clean the light cap, ensure the range hood is off and cool. Remove the cap by following the reverse of the installation steps. Wash with mild soap and water, then rinse thoroughly and dry completely with a soft cloth before re-installing.
- Inspecció: Periodically inspect the light cap for cracks, discoloration, or damage. Replace if necessary to maintain optimal light diffusion and protection.
- Eviteu productes químics durs: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic material of the light cap.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Light cap does not fit. | Model o dimensions incorrectes. | Verify the dimensions (50x155mm) and compatibility list against your range hood model. |
| Light cap falls out after installation. | Not securely clipped/seated. | Ensure all clips or tabs are fully engaged. Re-install carefully. |
| Light appears dim or discolored. | Cap is dirty or discolored from age/heat. | Clean the cap. If discoloration persists, replacement may be necessary. |
Especificacions
- Tipus de producte: Range Hood Light Cap
- Dimensions: 50mm (width) x 155mm (length)
- Material: Plàstic transparent
- Color: Clar
Compatible Models and Brands:
This light cap is compatible with various range hood models from the following brands. Please verify your specific model number for exact compatibility:
- FAGOR: (General compatibility)
- EDESA: AF2647B, 1CT130B932271328, 1CT130N932271337, 1CT130X, 1CT130X932271346, 1CT230B932271391, 1CT230N932271408, 1CT230X932271417, 1CT60B932271462, 1CT60X932271471, CT 230 B, CT-230, CT-230X, CT130B932270864, CT130LX932270882, CT130N932270873, CT130X932271211
- ASPES: 932020830AA5647B, AA5-646B, AA5-647B, a5646b932020812, a5646n932020821, a5647b932020830, a5647n932020849, a5647x932020858, AAS646B
- BRANDT: AT246XE1932690161, AT346BP1932690170
- BALAY: 3BT730, 3BT730B-01, 3BT732B-01, 3BT732X-01, BT732N
- BOSCH: DHI625P, DHI625P-01
- LG: 3BT730B-01, 3BT732B, 3BT732N-01, 3BT732X
- LYNX: 4BT715BP-00
- Remolí: (General compatibility, based on product image)
- IKEA: (General compatibility, based on product image)
Consells per a l'usuari
Tot i que no hi ha cap usuari específicviews or Q&A were provided, general tips for replacement parts include:
- Always double-check the dimensions of your existing part against the specifications provided to ensure a perfect fit.
- Take a photo of the original part before removal to aid in correct re-installation.
- Keep the area clean during installation to prevent dust or debris from getting into the light fixture.
Garantia i Suport
For warranty information or technical support regarding this FAGOR Hood Light Cap, please refer to the seller or manufacturer's official weblloc web. Conserveu el rebut de compra com a comprovant de compra.
