Manual d'instruccions de la màquina de gravat làser portàtil ATOMSTACK P7 M30

1. Introducció

The ATOMSTACK P7 M30 is a high-performance portable laser engraving machine designed for precision engraving and cutting. It features an upgraded fixed-focus laser, eye-protection flame-retardant panoramic glass, and an all-metal modular structure for stability and ease of use. This manual provides essential information for the safe and effective operation and maintenance of your device.

ATOMSTACK P7 M30 Portable Laser Engraving Machine with key features — Figure 1: ATOMSTACK P7 M30 Portable Laser Engraving Machine highlighting its main features.

2. Producte acabatview

2.1 Característiques clau

Eye-Protection Flame-Retardant Filter Panoramic Glass: Filters 97% of ultraviolet light, protecting eyes and allowing clear observation of engraving without goggles. The glass is also flame-retardant for enhanced safety.
Robust and Easy-to-Install Structure: All-aluminum alloy anodized structure for durability and improved engraving accuracy. The portable, all-metal design is 85% pre-assembled, allowing for installation in approximately 5 minutes.
Upgraded High-Performance Fixed-Focus Laser: Engraves without manual focal length adjustment. The laser focus area is approximately 50% smaller than other lasers, providing higher precision. The 5W laser output power can cut thick wood, acrylic, and rubber, and engrave stainless steel and ceramic materials (requires blackening for ceramics).
Àmplia compatibilitat: Compatible with popular engraving software such as LaserGRBL and LightBurn. Supports Windows XP/7/8/10 and macOS systems (via LightBurn). Supports various file formats including NC, BMP, JPG, PNG, DXF.
Precise Scale Lines Axis: X-axis and Y-axis feature precise scale lines for quick length measurement.
Integral Screw Rod: Utilizes an integrated screw rod instead of a combined coupling, ensuring more precise laser movement and enhanced durability.
Laser with Knob: A convenient knob allows for quick and easy adjustment of the laser's height.

2.2 Contingut del paquet

The ATOMSTACK P7 M30 comes with the following components:

Packing list for ATOMSTACK P7 M30 laser engraver — Figure 2: Detailed packing list of the ATOMSTACK P7 M30 components.

Assembly block x4
Coixinet de tall
Lower support foot
Upper support feet and control box
Mòdul làser
Y-axis assembly
Muntatge de l'eix X
cable USB
Laser slide
Y-axis belt assembly
Wood chips x3PCS
Adaptador d'alimentació
Cable d'alimentació
Foot pad foam x4PCS
Clau de punta oberta
Kit d'eines
Fixed focus film
Acrylic sheet x3PCS

3. Especificacions

Característica	Especificació
Número de model	ATOMSTACK P7 M30
Àrea de gravat	200 mm x 200 mm
Laser Power (Machine)	30W
Potència de sortida làser	5W
Longitud d'ona	445 ± 5 nm
Precisió del gravat	0.01 mm
Mètode d’enfocament	Fixed focus laser (no manual adjustment)
Programari operatiu	LaserGRBL, LightBurn
Suport del sistema operatiu	Windows XP/7/8/10, macOS
Format d’entrada	NC, BMP, JPG, PNG, DXF, etc.
Mètode de transmissió de dades	Connexió USB
Entrada Voltage	AC100-240V, 50/60Hz
Vol. De sortidatage	DC12V, 5A
Certificacions	CE, FCC, RoHS, FDA, PSE
Dimensions del producte	382 mm x 420 mm x 146 mm
Working Time (Laser Module)	Fins a 20,000 hores

Product information with dimensions and key specifications — Figure 3: Product dimensions and key specifications for the ATOMSTACK P7 M30.

4. Muntatge i muntatge

The ATOMSTACK P7 M30 features a modular design and comes 85% pre-assembled, allowing for quick setup, typically within 5 minutes. All necessary tools and parts are included in the kit.

4.1 Passos de muntatge

Refer to the multi-language instruction manual included in your package for detailed assembly steps. The modular design simplifies the process, making it user-friendly.

Modular design of the ATOMSTACK P7 M30 engraver — Figure 4: The modular design of the ATOMSTACK P7 M30, illustrating its easy assembly.

4.2 Using Support Blocks

The package includes four support blocks that can be used to adjust the machine's height or to ensure the X and Y axes maintain a horizontal plane for ideal engraving effects. They can also be used simultaneously with a roller for engraving cylindrical objects.

Support blocks for height adjustment and roller use — Figure 5: Illustration of the four support blocks and their functions for height adjustment and use with a roller.

5. Funcionament

5.1 Instal·lació i connexió del programari

Install your preferred engraving software (LaserGRBL or LightBurn) on your computer. Connect the ATOMSTACK P7 M30 to your computer via the provided USB cable. Ensure the machine is powered on.

5.2 Enfocament del làser

The P7 M30 features a fixed-focus laser, eliminating the need for manual focus adjustment. This ensures consistent precision for your engraving and cutting tasks.

Fixed focus laser engraving a family photo — Figure 6: The fixed-focus laser in action, demonstrating its precision without manual adjustment.

5.3 Adjusting Laser Height

Use the spiral knob on the laser module to conveniently adjust its height for different material thicknesses or to accommodate the use of support blocks or a roller.

Spiral button for laser height adjustment — Figure 7: Close-up of the spiral knob on the laser module for easy height adjustment.

5.4 Gravat i tall

The P7 M30 offers an effective engraving range of 200mm x 200mm. It is capable of fine metal carving, wood carving, and precision cutting of materials up to 10mm thick.

200mm x 200mm effective engraving range — Figure 8: The 200mm x 200mm effective engraving area of the ATOMSTACK P7 M30.

Precision laser cutting of 10mm wood — Figure 9: Demonstrating the precision laser cutting capability, including cutting 10mm wood.

6. Manteniment

Regular maintenance ensures the longevity and optimal performance of your ATOMSTACK P7 M30.

Neteja: Keep the laser lens and machine components clean from dust and debris. Use a soft, lint-free cloth.
Vida útil del mòdul làser: The laser module is designed for extended use, with a working life of up to 10,000 hours.
Actualitzacions de programari: Periodically check for software updates for LaserGRBL and LightBurn to ensure compatibility and access to new features.

Diagram showing working hours and laser power degradation — Figure 10: Graph illustrating the laser module's working hours and power stability over time.

7. Pautes de seguretat

Adhering to these safety guidelines is crucial to prevent injury and damage to the equipment.

Protecció ocular: ALWAYS wear appropriate eye protection when operating the laser engraver. Although the machine has eye-protection glass, additional safety goggles are recommended, especially for prolonged use or if observing from different angles.
Supervisió: Never leave the laser engraver unattended while it is operating, as materials being carved can catch fire.
Ventilació: Operate the laser engraver in a fireproof area with good ventilation to dissipate fumes and heat.
Menors: Keep minors, especially children younger than 14, away from the laser engraver. Minors of any age should only use the laser under direct adult supervision and with proper eye protection.
Laser Beam Contact: Do not touch the laser beam with your hands or any other objects you do not intend to engrave, burn, or cut. Serious physical harm can result from improper use.
Impacte físic: Avoid strong impacts on the machine.
Entorn de funcionament: Use the laser engraver in a room that can be closed by a door. Ensure that neither laser beams nor stray light can penetrate through windows or openings.
Senyals d'advertència: While the laser engraver is in operation, use door signs or a warning light on the door to indicate its active status.
Superfícies calentes: Do not touch the heat sink immediately after the laser engraver stops working, as it may be hot and cause burns.

Close-up of the eye protection filter panoramic glass — Figure 11: The eye protection filter panoramic glass, designed to filter 97% of UV light.

8. Solució De Problemes

8.1 Preguntes habituals

Q: The product description mentions 30W, but the laser power is listed as 4.5W-5.5W. Which is correct?: A: The total power consumption of the machine is 30W, while the actual laser output power is between 4.5W and 5.5W. This is a common distinction in laser engravers, where machine power refers to overall electrical consumption and laser output power refers to the optical power of the laser beam.
Q: Does this machine require assembly upon receipt?: A: Yes, the machine comes as a kit. You will need to assemble it yourself, but all necessary tools and parts are included in the package. Detailed instructions are provided in multiple languages.
Q: What if the item is damaged during transportation or cannot be used normally?: A: If you encounter any issues such as damage during transit or abnormal operation, please contact customer service immediately. Provide photos and a video demonstrating the problem, and we will offer solutions, which may include a partial refund or sending free spare parts.

9. Consells d'usuari

Laser Power Adjustment: The laser power is adjustable through the engraving software, allowing you to fine-tune settings for different materials and desired effects.
Fixed Focus Advantage: Leverage the fixed-focus laser feature to save time and ensure consistent engraving quality without the need for manual adjustments.
Protecció ocular: Always prioritize eye safety. While the panoramic glass offers protection, consider wearing additional safety goggles for maximum security, especially during initial setup and testing.
Prova de materials: Before starting a large project, perform small test engravings or cuts on scrap material to optimize power and speed settings.

10. Garantia i Suport

All ATOMSTACK P7 M30 machines come with a 13 mesos de garantia against manufacturing defects. Purchase with confidence, knowing that support is available.

If you experience any breakdown or have questions, please contact customer service. Provide a working video of the issue, and solutions will be offered.

11. Applicable Materials

11.1 Engraving Materials

Fusta
Bambú
Cartró
Plàstic
Cuir
MDF (Medium-density fiberboard)
Pissarra
Metall lacat
Mirall d'acer inoxidable

11.2 Materials de tall

Cartró
Tela no teixida
Xapa
Acrylic (some types)
Thin Plastic Board (some types)
Esponja
MDF (some thicknesses)
Cuir

Examples of carving materials including metal, cloth, paper, plastic, leather, board, slate, ceramics, and grass — Figura 12: Exemple visualamples of various materials suitable for carving with the ATOMSTACK P7 M30.

Various engraving effect displays on different materials like wood, metal, and fabric — Figura 13: Examples of engraving effects achieved on diverse materials.

	Manual de la màquina de gravat làser ATOMSTACK A5 Pro Manual d'usuari complet per a la màquina de gravat làser ATOMSTACK A5 Pro, que cobreix la seguretat, la instal·lació del programari (LaserGRBL i LightBurn), el funcionament i la resolució de problemes.
	Manual d'usuari del gravador làser ATOMSTACK A5/A10/A20 PRO V2 Manual d'usuari complet per als gravadors làser ATOMSTACK A5, A10 i A20 PRO V2, que cobreix la seguretat, les instruccions de muntatge, la configuració del programari (LightBurn, LaserGRBL), el funcionament, el manteniment i la resolució de problemes.
	Paràmetres de gravat i tall làser P7 M30 Taules completes de paràmetres per al gravador i tallador làser AtomStack P7 M30, que detallen la configuració de diversos materials com ara til·ler, fusta dura, bambú, acrílic, paper kraft, miralls i cuir, tant per a operacions de gravat com de tall.
	Manual d'usuari del gravador làser ATOMSTACK Aquest manual d'usuari proporciona instruccions completes i pautes de seguretat per al funcionament del gravador làser ATOMSTACK. Cobreix la instal·lació, la configuració del programari, el funcionament, el manteniment i la resolució de problemes.
	Paràmetres de gravat i tall làser per a materials comuns Una guia completa que detalla els paràmetres òptims de gravat i tall làser per a una àmplia gamma de materials, com ara fusta, cuir, acrílic, vidre, metall i més. Els paràmetres cobreixen l'interval de línia, la velocitat, la potència, el mode d'imatge i les passades, amb ex. visual.amples.
	Manual d'usuari i guia d'instal·lació del mandril rotatiu ATOMSTACK MAKER R1 Aquesta guia completa detalla la instal·lació, la connexió i el funcionament del mandril rotatiu ATOMSTACK MAKER R1 per a màquines de gravat làser. Cobreix el contingut de l'embalatge, els procediments de configuració, la configuració del programari amb LightBurn i notes essencials per gravar objectes cilíndrics, esfèrics i d'altres formes.

ATOMSTACK P7 M30