Introducció
The ThermoPro TP65C is a digital wireless indoor/outdoor thermometer and hygrometer designed to provide accurate measurements of temperature and humidity. Equipped with professional-grade sensors, it helps you monitor environmental conditions in your home and outdoor areas, allowing for necessary adjustments to maintain comfort and health. Its user-friendly design includes a large backlit touchscreen for easy readability.
ThermoPro TP65C main display unit and remote sensor.
Contingut del paquet
- 1 x Unitat d'estació base (receptor)
- 1 x Single Outdoor Remote Sensor (Transmitter)
- 1 x Manual d'usuari
Nota: Les piles no estan incloses i s'han de comprar per separat.
Especificacions
| Característica | Especificació |
|---|---|
| Número de model | TP65C |
| Marca | ThermoPro |
| Teoria | Termòmetre Higròmetre |
| Tipus de visualització | DIGITAL, 4'' LCD with Backlit |
| Mida de la pantalla | 2.0 - 3.9 polzades |
| Tipus de potència | AAA Battery (not included) |
| Rang de temperatura interior | -4 ° F ~ 158 ° F (-20 ° C ~ 70 ° C) |
| Interval de temperatura exterior | -4 ° F ~ 158 ° F (-20 ° C ~ 70 ° C) |
| Precisió de la temperatura | ±2.0 °F (±1.1 °C) |
| Gamma d’humitat | 10% ~ 99% |
| Resolució d’humitat | 1% |
| Precisió de la humitat | ±2% del 30% al 80%; ±3% per sota del 30% i per sobre del 80% |
| Rang de transmissió | Fins a 100 metres (330 peus) en zona oberta |
| Freqüència de transmissió | 868 MHz |
| Mesures | Fahrenheit i Celsius |
| Certificació | CE |
Approximate dimensions of the display unit (4.3 in / 11 cm height, 3.3 in / 8.5 cm width) and remote sensor (2.9 in / 7.4 cm height, 2.4 in / 6.3 cm width).
Guia de configuració
1. Instal·lació de la bateria
- Open the battery compartment on the back of both the Base Station Unit (Receiver) and the Outdoor Remote Sensor (Transmitter).
- Insert the required AAA batteries (not included) into each unit, ensuring correct polarity (+/-).
- Tanqueu els compartiments de la bateria de manera segura.
2. Sincronització
The units should automatically synchronize upon battery installation. If they do not, or if you are adding additional sensors:
- Press and hold the "CH SYNC" button on the main display unit to initiate synchronization.
- Ensure the remote sensor is within range.
3. Col·locació
Optimal placement is crucial for accurate readings and reliable wireless transmission.
- Unitat de visualització principal: Can be placed on a tabletop using its integrated stand, mounted on a wall using the hanging hole, or attached to a metal surface via its magnetic back.
- Sensor remot exterior: Place the sensor in a location that is protected from direct sunlight and precipitation for the most accurate readings. Ensure it is within the 100-meter (330 feet) transmission range of the main unit. Avoid placing it near large metal objects or electronic devices that could interfere with the wireless signal.
Various placement options for the main display unit.
Example placement of the wireless remote sensor outdoors.
Wireless transmission range up to 100m (330ft) in open areas.
Funcionament
Lectura de la pantalla
The large LCD screen displays indoor temperature and humidity, as well as outdoor temperature and humidity from the remote sensor. The "OUT" section shows outdoor readings, and "IN" shows indoor readings. Channel number (CH1, CH2, CH3) indicates which remote sensor's data is being displayed.
Botons de pantalla tàctil
The TP65C features touch-sensitive buttons located at the bottom of the screen:
- CH SYNC: Press to cycle through remote sensor channels (CH1, CH2, CH3). Press and hold to initiate synchronization with remote sensors.
- Light Bulb Icon: Activates the backlight for easy reading in low light conditions. The backlight automatically turns off after 15 seconds.
- °F/°C HISTORY: Press to switch between Fahrenheit (°F) and Celsius (°C) temperature display. Press and hold to view the maximum and minimum temperature/humidity records for the last 24 hours or all time.
- MAX/MIN CLEAR: Quan viewing MAX/MIN records, press to clear the current records.
Touch screen buttons for channel selection, backlight, temperature unit, and MAX/MIN records.
Monitoring Multiple Sensors
The main display unit can receive data from up to three remote sensors (additional sensors sold separately). Use the "CH SYNC" button to cycle through the channels and view readings from each sensor.
The display unit can track temperature and humidity from up to three remote sensors.
The receiver can synchronize with up to three remote sensors for comprehensive monitoring.
Max/Min Records and Trend Arrows
The device records the maximum and minimum temperature and humidity readings. Trend arrows indicate whether the temperature and humidity are rising, falling, or remaining constant.
