1. Producte acabatview
The Jebao MDP-10000 is a high-performance Smart DC Pump designed for use in fish tanks and aquariums. It features an advanced LCD display and WiFi control capabilities, allowing for precise adjustment and monitoring of water flow and oxygenation. This submersible pump utilizes SINE Wave Technology for ultra-quiet operation and is built with durable, wear-resistant ceramic components, ensuring long-lasting performance.
2. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | MDP-10000 |
| Poder | 80W |
| Voltage | DC 24V (Input: 100-250V, 50/60Hz) |
| Max Water Flow (Q max) | 10000 L/H |
| Alçada màxima (H màx) | 6 metres |
| Outlet Connector Sizes | 25 mm, 32 mm, 40 mm |
| Longitud del cable d'alimentació | 2.6 metres |
| Pump Body Size (with front cover) | 200 mm x 130 mm x 170 mm (aprox.) |
| Teoria | Ceramic pump |
| Aplicació | Submergible |
| Estructura | Single-stage Bomba |
| Pressió | Alta pressió |
| Control | LCD Display, WiFi Control |
| Material de l'eix | Wear-resistant ceramic shaft (No copper element) |
3. Instruccions de seguretat
- Always disconnect the power supply before handling, installing, or performing maintenance on the pump.
- Ensure the pump is fully submerged in water during operation to prevent overheating and damage.
- No feu funcionar la bomba si el cable d'alimentació o l'endoll estan danyats.
- This pump is designed for DC 24V operation. Use only the provided power adapter.
- Keep the controller and power adapter away from water to prevent electrical hazards.
- Ensure all connections are secure before powering on the pump.
- This product is suitable for marine and fresh water environments.
4. Contingut del paquet
En obrir el paquet, comproveu que tots els components siguin presents i no estiguin danyats:
- Jebao MDP-10000 Smart DC Pump
- LCD Display Controller
- Adaptador d'alimentació (DC 24V)
- Various Outlet Connectors (25MM, 32MM, 40MM)
- Manual d'instruccions (aquest document)
5. Configuració
5.1 Instal·lació física
- Tria la ubicació: Place the pump fully submerged in your fish tank or aquarium. Ensure it is stable and not obstructed.
- Attach Outlet Connector: Select the appropriate outlet connector (25MM, 32MM, or 40MM) for your plumbing and securely attach it to the pump's outlet.
- Connexió de tubs: Connect your aquarium tubing to the attached outlet connector.
5.2 Connexió elèctrica
- Connecteu la bomba al controlador: Securely connect the pump's cable to the designated port on the LCD display controller.
- Connecteu l'adaptador d'alimentació: Plug the DC 24V power adapter into the controller.
- Encès: Plug the power adapter into a suitable electrical outlet. The LCD display should illuminate.
5.3 WiFi Setup
- Descarregar l'aplicació: Download the 'Jebao Aqua' app from the App Store (iOS) or Google Play Store (Android).
- Activa el Wi-Fi: Ensure your smartphone's WiFi is enabled.
- Parella el dispositiu: Follow the in-app instructions to pair your MDP-10000 pump with your smartphone via WiFi. This typically involves selecting the pump from a list of available devices and entering your WiFi network credentials.
6. Instruccions de funcionament
6.1 Using the LCD Controller
- Encès/apagat: Press the power button on the controller to turn the pump on or off.
- Ajustar el flux: Use the up/down arrows to adjust the water flow rate. The LCD display will show the current power (W) and flow percentage.
- Selecció del mode: The controller may offer different operating modes (e.g., constant flow, wave mode). Refer to the controller's specific buttons for mode selection.
6.2 Using WiFi Control (Jebao Aqua App)
- Once paired, open the Jebao Aqua app on your smartphone.
- You can remotely adjust flow rates, switch between operating modes, and set schedules directly from the app.
- The app provides a visual interface for monitoring pump status and performance.
6.3 Característiques especials
- SINE Wave Technology: Ensures ultra-quiet operation, minimizing disturbance to your aquatic environment.
- IC Electronic Detection: The pump features automatic power-off protection if it runs dry or if the motor rotor is blocked, preventing damage.
7. Manteniment
Un manteniment regular garanteix un rendiment òptim i allarga la vida útil de la bomba.
- Desconnecteu l'alimentació: Desendolleu sempre la bomba de la font d'alimentació abans de qualsevol manteniment.
- Traieu la bomba: Carefully remove the pump from the aquarium.
- Disassemble (if necessary): Depending on the model, you may need to gently twist or unclip the front cover to access the impeller chamber.
- Clean Impeller and Chamber: Remove any debris, algae, or mineral buildup from the impeller and its chamber. The Fe2O3 magnet rotor and wear-resistant ceramic shaft are designed for durability, but regular cleaning is still essential. Use a soft brush and clean water.
- Inspeccionar components: Check the power cord for any signs of damage. Ensure the ceramic shaft is intact and free from cracks.
- Torneu a muntar: Carefully reassemble the pump, ensuring all parts are securely fitted.
- Prova: Place the pump back into the water and reconnect the power to test its operation.
8. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La bomba no arrenca | No power; Controller issue; Motor blocked | Check power connection. Ensure controller is properly connected. Disconnect power, remove pump, and check for impeller blockages. |
| Baix cabal d'aigua | Impeller clogged; Tubing obstructed; Flow setting too low | Clean impeller and pump intake. Check tubing for kinks or blockages. Increase flow setting on controller or app. |
| Soroll/vibració inusuals | Impeller debris; Improper seating; Air in pump | Clean impeller. Ensure pump is securely seated and fully submerged. Gently shake pump to release trapped air. |
| Problemes de connexió Wi-Fi | Incorrect network; App error; Router distance | Verify WiFi credentials. Restart app and controller. Move router closer or use a WiFi extender. |
| La bomba s'atura de manera inesperada | Dry run protection; Motor blocked; Power interruption | Check water level. Clean impeller for blockages. Verify stable power supply. |
9. Consells d'usuari
- Utilize WiFi Control: For maximum convenience, use the Jebao Aqua app to control and monitor your pump settings from anywhere. This allows for easy adjustments without needing to access the physical controller.
- Neteja regular: To maintain optimal flow and prevent premature wear, clean the pump's impeller and intake regularly, especially in tanks with high organic load.
- Comprovar el nivell d'aigua: Always ensure the pump is fully submerged. The automatic power-off feature is a safeguard, but consistent proper water levels are crucial for pump longevity.
- Experiment with Flow: Use the adjustable flow feature to find the ideal water circulation for your specific aquarium inhabitants and setup.
10. Garantia i Suport
Per obtenir informació sobre la garantia, assistència tècnica o consultes sobre el servei, poseu-vos en contacte directament amb el venedor o el fabricant. Conserveu el rebut de compra com a comprovant de compra.
