Introducció
The DUALSKY FC151 is a compact and high-performance 3-axis gyro stabilizer flight control system designed for various RC airplanes. It integrates a MEMS gyroscope and accelerometer, powered by a 32-bit high-performance ARM MCU, to provide advanced attitude stabilization. This system supports multiple aircraft configurations and offers easy programming via a button and LED indicators.
Característiques
- Mini dimension, MEMS gyroscope and accelerometer in one chip, only 8 grams.
- 32-bit high performance ARM MCU.
- Original advanced attitude stabilization algorithm.
- Support single/double aileron, fly wing and V-tail aircraft.
- Support flaperon mixing.
- Support aerobatic/3D airplanes.
- Independent sensitivity adjustment of all 3 axes.
- Support Futaba S. BUS protocol.
- Support mode switch via extra channel, can be switched between different modes.
- Program via button and LEDs.
- Support HV inputs.
Contingut del paquet
El paquet normalment inclou:
- DUALSKY FC151 Flight Control Unit
- Cables de connexió
- 3M Double Coated Tissue Tape for mounting
Configuració
Instal·lació i cablejat
Mount the FC151 securely in your RC airplane using the provided double-sided tape. Ensure the unit is oriented correctly according to your desired setup. Connect the FC151 to your receiver and servos as per your aircraft's wiring diagram. The FC151 supports HV inputs.
Paràmetres de configuració
The FC151 can be programmed via a button and LED indicators. Refer to the chart below for specific settings related to installation direction and airplane type.
| Item | L2 (LED) | |||
|---|---|---|---|---|
| L1 (LED) | Blau (per defecte) | Verd | Vermell | groc |
| Cara amunt | Cara avall | Cara a la dreta | Cara esquerra | |
| Blue (Install direction) | Normal | Delta wing | Cua en V | |
| Green (Airplane type) | ||||
En funcionament
Indicadors LED d'estat
The FC151 uses two LEDs (LED1 and LED2) to indicate its current status and operating mode. Understanding these indicators is crucial for proper operation.
| ESTAT DEL LED1 | FC151 STATUS |
|---|---|
| Verd intermitent | Inicialitzant |
| Sòlid verd | Initialization completed, signal OK |
| Sòlid vermell | Initialization completed, no signal |
| ESTAT DEL LED2 | FC151 STATUS |
| Blue on for 0.5 second | In gyro off mode |
| Green on for 0.5 second | In aerobatic mode |
| Red on for 0.5 second | In auto level mode |
Canvi de mode
The FC151 supports mode switching via an extra channel on your remote control. This allows you to switch between different flight modes, such as gyro off, aerobatic, and auto-level, during flight.
Manteniment
The DUALSKY FC151 is designed for durability and requires minimal maintenance. Follow these general guidelines:
- Mantenir net: Ensure the unit is free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning.
- Inspeccionar connexions: Regularly check all wiring connections for secure fit and signs of wear or damage.
- Eviteu el xoc físic: Protect the unit from impacts and vibrations, which can affect its performance.
- Emmagatzematge: Store the FC151 in a dry, cool environment when not in use.
Resolució de problemes
LED Indicators for Diagnostics
- LED1 Red Solid: If LED1 is solid red after initialization, it indicates no signal from the receiver. Check your receiver connections and ensure your transmitter is powered on and bound correctly.
- No Stabilization: If the gyro stabilization does not seem to be working, check LED2 status to ensure you are not in 'gyro off' mode (Blue on for 0.5s). Verify that the sensitivity settings for all 3 axes are correctly adjusted.
- Incorrect Flight Behavior: Double-check the FC151's installation direction and the selected airplane type settings (Normal, Delta wing, V-tail) as per the configuration chart.
Especificacions
| Característica | Detall |
|---|---|
| Model | FC151 |
| Tipus | 3 Axis Gyro Stabilizer Flight Control System |
| Pes | Aprox. 8 grams |
| Material | Niló |
| Per al tipus de vehicle | Avions |
| Processador | 32-bit high performance ARM MCU |
| Sensors | MEMS gyroscope and accelerometer |
| Entrada Voltage | Supports HV inputs |
| Origen | Xina continental |
| Edat recomanada | 6-12 anys, 14+ anys |
Consells per a l'usuari
- Comprovació de compatibilitat: While designed for RC airplanes, always verify compatibility with your specific aircraft's power system (e.g., electric vs. petrol) and control setup before installation.
- Configuració inicial: Take your time during the initial setup and calibration. Incorrect installation direction or airplane type settings can lead to unpredictable flight behavior.
- Ajust de sensibilitat: Experiment with the independent sensitivity adjustments for each axis to fine-tune the stabilization performance to your flying style and aircraft characteristics.
Garantia i suport
For any technical assistance, warranty claims, or support inquiries, please contact your retailer or the DUALSKY customer service directly. Keep your purchase receipt as proof of purchase.
