Manuals+

Kamoer KCM-ODM

Kamoer KCM-ODM Peristaltic Dosing Pump User Manual

1. Introducció

This manual provides detailed instructions for the Kamoer KCM-ODM High Precision Small Peristaltic Dosing Pump. The KCM-ODM is designed for precise liquid transfer in various applications, featuring a stepper motor for high accuracy and small pulsation. It is suitable for both viscous and non-viscous liquids.

Kamoer KCM-ODM pump with stepper motor, 12V/24V, 420ml/min adjustable, high precision.
Figure 1: Kamoer KCM-ODM Peristaltic Dosing Pump highlighting Stepper Motor and High Precision.

Les característiques clau inclouen:

  • Suitable for viscous and non-viscous liquid transfer.
  • High precision, small pulsation.
  • Can be placed outside the instrument panel for ground detection.
  • Simple structure, high reliability.
  • Pump tube can be quickly replaced.
  • Imported motor ensures excellent performance.

2. Especificacions

2.1 paràmetres bàsics

  • Motor: Motor pas a pas
  • Voltage: 12V/24V (with Driver Board KMD-M42S and 2802 controller)
  • Flux: 17~420ml/min (adjustable)
  • Material del tub: Silicone tube/PharMed BPT
  • Mètode d'instal·lació: ODMA/ODMB (ODMA: Rubber shock behind the pump; ODMB: No Rubber shock)
  • Rotor: 3/6 rotors
  • Capçal de la bomba: Plàstics d'enginyeria
  • Temperatura: 0 ~ 40 ℃
  • Humitat: Menys del 80%

2.2 Tubing Selection Guide

The following table provides guidance for selecting the appropriate tubing size based on desired flow rate. All data is tested using water. For viscous or corrosive liquids, BPT tubing is recommended. Silicone tubing is available as a customized option.

Capçal de bombaTub (DI x DE)Interval de velocitat (RPM)Caudal (ml/min)Durada de la vida útil dels tubsTemperatura de treball de la canonada
Capçal de bomba de 6 rotorsB14 (DI 1.6 x DI 4.8 mm)0.1-400641000H-51 ℃ ~ 132 ℃
Capçal de bomba de 3 rotorsB16 (DI 3.2 x DI 6.4 mm)0.1-4002521000H-51 ℃ ~ 132 ℃
Capçal de bomba de 3 rotorsB40 (DI 4.0 x DI 7.2 mm)0.1-4003361000H-51 ℃ ~ 132 ℃
Capçal de bomba de 3 rotorsB25 (DI 4.8 x DI 8.0 mm)0.1-4004521000H-51 ℃ ~ 132 ℃

2.3 Dimensions del paquet

  • Longitud: 10 cm
  • Amplada: 10 cm
  • Alçada: 10 cm
  • Pes: 1.9 kg

3. Components mésview

The KCM-ODM pump system includes the main pump unit, a driver board, and a controller with user interface buttons and an LED display.

Kamoer KCM-ODM pump showing 2802 Control board and KMD-42B-P Driver board.
Figura 2: Intern view highlighting the 2802 Control board and KMD-42B-P Driver board.
Kamoer KCM-ODM pump with LED Digital Display, Flow Speed Button (Black), Start and Stop Button (Green), Flow Direction Button (Red).
Figure 3: Control interface components.

The control interface consists of:

  • Pantalla digital LED: Shows the rotating speed.
  • Flow Speed Button (Black): Used to adjust the flow rate.
  • Start and Stop Button (Green): Initiates or halts pump operation.
  • Flow Direction Button (Red): Changes the direction of liquid flow.
Close-up of pump head with 3/6 rotors and BPT/Silicone Tubing.
Figure 4: Pump head with tubing details.
Close-up of threaded joint for tubing connection.
Figure 5: Threaded joint for secure tubing connection.

4. Configuració i instal·lació

4.1 Tubing Connection

Connect the appropriate silicone or BPT tubing to the pump's threaded joints. Ensure a secure fit to prevent leaks.

Video 1: Demonstration of tubing connection and basic pump operation.

4.2 Connexions elèctriques

The KCM-ODM pump comes with a KMD-M42S driver board and a 2802 controller. Refer to the wiring diagrams below for proper connection.

Image of the KMD-M42S Driver board.
Figure 6: KMD-M42S Driver Board.
Image of the 2802 Controller board.
Figure 7: 2802 Controller Board.
Image showing the 2802 Controller with connected buttons and LED display.
Figure 8: 2802 Controller with connected buttons and LED display.

4.2.1 Stepper Motor Wiring

Wiring diagram for the stepper motor showing A+ (Black line), B+ (Blue line), B- (Red line), A- (Green line).
Figure 9: Stepper Motor Wiring Diagram.

4.2.2 Controller to Driver Wiring

Wiring diagram for Controller to Driver connection, including resistor values for different voltages.
Figure 10: Controller to Driver Wiring Diagram.

Note on Resistors:

  • R is the voltage limiting resistor in series.
  • When the interface voltage of the controller is 5V, it is unnecessary to need R; just directly connect.
  • When the interface voltage is 12V, connect a 1K resistor in series.
  • When the interface voltage is 24V, connect the 2.7K resistor in series.

4.3 Instal·lació física

The pump can be installed using either the ODMA or ODMB method. ODMA includes a rubber shock absorber behind the pump, while ODMB does not. Ensure to specify your preferred installation method if ordering a custom configuration.

Dimensional drawing of the pump, side view i a dalt view amb mesures.
Figure 11: Pump Dimensional Drawing (Side and Top Views).
Image of the pump with overall dimensions 75mm and 126mm.
Figure 12: Pump with Overall Dimensions.

4.3.1 Instal·lació a la paret

For wall mounting, use the specified hole size as shown in the diagram below.

Wall plate hole size diagram showing dimensions 56.2mm x 56.2mm with R4.6 corners.
Figure 13: Wall Plate Hole Size (Unit: mm).

5. Funcionament

Once the pump is properly installed and connected to a power adapter, you can begin operation using the control buttons.

  1. Inici/Parada: Premeu el botó Botó verd per engegar o aturar la bomba.
  2. Direcció del flux: Premeu el botó Botó vermell to change the direction of the liquid flow.
  3. Flow Speed Adjustment: Utilitza el Black button (potentiometer) to adjust the flow rate. The LED digital display will show the current rotating speed.
Kamoer KCM-ODM pump in operation, demonstrating liquid transfer between two beakers.
Figure 14: Pump in operation, transferring liquid.

6. Manteniment

Regular maintenance ensures optimal performance and longevity of your KCM-ODM pump.

6.1 Substitució de tubs

The pump is designed for quick and easy tube replacement. Regularly inspect the tubing for wear, cracks, or blockages. Replace tubing as needed to maintain flow accuracy and prevent contamination.

7. Solució De Problemes

No specific troubleshooting information is provided in the product description. If you encounter issues, please refer to the contact information in the support section.

8. Consells d'usuari

No hi havia consells específics per a l'usuari disponibles del servei de clients.viewo preguntes i respostes per a aquest producte.

9. Garantia i Suport

For any questions or support needs regarding your Kamoer KCM-ODM Peristaltic Dosing Pump, please contact the seller or manufacturer. They are always at your service.

Documents relacionats - KCM-ODM

Preview Manual d'usuari de la bomba peristàltica intel·ligent Kamoer UIP WIFI E
Manual d'usuari complet per a la bomba peristàltica intel·ligent Kamoer UIP WIFI E, que detalla les seves característiques, modes de funcionament (continuïtat, ració, remot), configuració del sistema, manteniment i especificacions tècniques.
Preview Bomba peristàltica intel·ligent Kamoer UIP WIFI E: guia d'inici ràpid i especificacions tècniques
Guia d'inici ràpid i especificacions tècniques de la bomba peristàltica intel·ligent Kamoer UIP WIFI E, que detalla les seves característiques, interfície, connectivitat de l'aplicació i informació de garantia.
Preview Manual d'usuari de la bomba peristàltica intel·ligent Kamoer M1-STP
Manual d'usuari de la bomba peristàltica intel·ligent Kamoer M1-STP, que detalla les seves característiques, modes de funcionament (continu i quantitatiu), calibratge i paràmetres tècnics.
Preview Manual d'usuari de la bomba peristàltica ajustable KCP-KK300-D
Manual d'usuari de la bomba peristàltica ajustable Kamoer KCP-KK300-D, que detalla les seves característiques, especificacions, condicions de funcionament, descripció de la interfície i precaucions de seguretat.
Preview Kamoer KPHM100 Micro Peristaltic Pump Product Manual
Comprehensive product manual for the Kamoer KPHM100 micro peristaltic pump. Details features, specifications for brushed DC, brushless DC, and stepper motor variants, applications, pump tube information, and optional accessories. Includes model explanation and technical data.
Preview Manual del producte de la bomba peristàltica intel·ligent Kamoer M1-STP
Aquest manual proporciona informació detallada sobre la bomba peristàltica intel·ligent Kamoer M1-STP, incloent-hi les seves característiques, especificacions, definicions de models, explicacions de la interfície i accessoris. Cobreix les característiques de rendiment i les aplicacions típiques en entorns de laboratori i industrials.