1. Introducció
The Liectroux HCR-10 is an advanced robot window cleaner designed to automate the cleaning of various glass surfaces. Featuring intelligent navigation, automatic water spraying, and a powerful vacuum suction, it ensures efficient and thorough cleaning. This manual provides essential information for safe and effective use of your HCR-10 robot.
2. Informació important de seguretat
Si us plau, llegiu atentament totes les instruccions de seguretat abans de fer funcionar el dispositiu.
- Always attach the safety rope securely to a fixed object indoors before placing the robot on the window.
- Ensure the power cable is properly connected and secured to prevent accidental disconnection.
- No utilitzeu el robot sobre superfícies de vidre esquerdades o danyades.
- Mantingueu les mans i la roba solta allunyades de les peces mòbils durant el funcionament.
- No utilitzeu el robot en condicions de pluja o humitat extrema.
- Supervise the robot during its first few cleaning cycles to ensure proper operation and adherence to the surface.
- The built-in UPS provides power-off protection for approximately 20 minutes. Retrieve the robot promptly if power is lost.
3. Producte acabatview & Contingut del paquet
The Liectroux HCR-10 is designed for efficient window cleaning with features like dual-disk twisting, a compact body, and a self-learning system.
Contingut del paquet:
- Liectroux HCR-10 Main Unit
- Cleaning Cloths (10 pieces)
- Cleaning Ring (1 piece)
- Water Adding Bottle (1 piece)
- Remote Controller (1 piece)
- Extendable Cable & Adapter (1 set)
- Cable d'alimentació (1 peça)
- Safety Rope (1 piece)
- Manual d'instruccions (1 peça)
4. Especificacions
| Característica | Especificació |
|---|---|
| Entrada Voltage | 100-240V~, 50/60Hz |
| Potència nominal | 80W |
| Capacitat de la bateria | Bateria de ions de liti de 500 mAh |
| Dimensions exteriors | 295 * 145 * 68 mm |
| Potència d'aspiració | 2800 Pa |
| Pes net | 1.03 kg |
| UPS Power Failure Protection Time | 20 min |
| Way to Control | Control Remot per Infrarojos |
| Soroll | Menys de 65 dB |
| Border Detection | Automàtic |
| Fall Arrest Control | UPS (Uninterruptible Power System) / Safety Rope |
| Mode de neteja | 3 tipus |
| Water Spraying Method | Manual / Automàtic |
5. Guia de configuració
- Enganxeu els draps de neteja: Securely attach the high-density cleaning fiber cloths to the two rotating disks on the underside of the robot. Ensure they are flat and cover the entire surface of the disks.
- Connectar l'alimentació:
Connect the power cord to the adapter, and then connect the adapter to the robot's power input. Plug the power cord into a suitable electrical outlet. The robot requires continuous power during operation.
Connect the 4m power cable and 1.5m extension for a larger cleaning range. - Omplir el dipòsit d'aigua: Open the water tank cap and use the provided water adding bottle to fill the 30ml water tank with clean water or a suitable glass cleaning solution (detergent not included). Close the cap securely.
Fill the water tank with water or cleaning solution using the provided bottle. - Fixeu la corda de seguretat: Securely tie one end of the safety rope to the robot and the other end to a strong, fixed object indoors (e.g., a heavy piece of furniture, a window frame anchor). This is a critical safety measure to prevent the robot from falling.
6. Instruccions de funcionament
- Encès: Press the power button on the robot or the remote control to turn on the device. The indicator lights will illuminate.
- Lloc a la superfície: Hold the robot firmly against the glass surface. The vacuum suction will activate, securing the robot to the window. Ensure a strong suction before releasing.
One-press start on the framework for easy operation. - Seleccioneu el mode de neteja: Use the remote control to select one of the three automatic cleaning modes:
- Up-to-down: Cleans from top to bottom.
- Left-to-down: Cleans from left to bottom.
- Right-to-down: Cleans from right to bottom.
Use the remote control to select cleaning modes or manual movement. - Automatic Water Spray: The robot features an automatic water spray function. You can also manually trigger the spray using the remote control. The innovative atomizing nozzle creates a 15µm water mist to effectively dissolve dirt.
The atomizing nozzle sprays a fine mist for effective dirt dissolution. - Procés de neteja: The robot employs dual-disk simulated twisting and sweeping movements at 70rpm for comprehensive cleaning. Its AI routing ensures efficient coverage.
AI routing with dual-wheel twisting ensures thorough cleaning. - Finalització: The robot will automatically return to its starting point once the cleaning cycle is complete.
Applicable Surfaces:
The Liectroux HCR-10 is suitable for various smooth surfaces, including:
- Bathroom mirrors
- Wooden/tile surfaces (ensure surface is smooth and non-porous)
- Marble walls
- Windows around the house
- Framed glass
7. Manteniment
- Clean Cleaning Cloths: After each use, remove the cleaning cloths from the robot. Wash them thoroughly with water and mild detergent. Allow them to air dry completely before reattaching or storing.
The high-density fiber cloths are designed to capture various types of dirt and should be cleaned regularly. - Dipòsit d'aigua buit: If any cleaning solution remains in the tank, empty it and rinse with clean water. Ensure the tank is dry before storage.
- Neteja els sensors: Periodically wipe the robot's sensors with a soft, dry cloth to ensure optimal performance and border detection.
- Emmagatzema correctament: Guardeu el robot i els seus accessoris en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
8. Solució De Problemes
- Robot not sticking to the glass:
- Ensure the glass surface is clean and free of large debris that could interfere with suction.
- Check that the cleaning cloths are properly attached and not overly wet.
- Verify the power cable is securely connected and the robot is receiving power.
- The suction power is 2800Pa; ensure the surface is suitable for this level of suction.
- Robot not moving or moving erratically:
- Check for any obstructions on the glass surface or around the robot's wheels.
- Ensure the cleaning cloths are not too dirty or worn, which can affect movement.
- Restart the robot and try a different cleaning mode.
- Verifiqueu que les piles del comandament a distància no estiguin esgotades.
- Water spray not working:
- Comproveu si el dipòsit d'aigua està ple.
- Ensure the nozzle is not clogged. Clean it gently if necessary.
- Verify the water spray function is activated via the remote control (manual or auto mode).
- Robot falls during operation:
- Immediately check the safety rope attachment. It must be securely fastened to a strong anchor point.
- Ensure the power connection is stable. The UPS provides temporary power, but a stable main power supply is crucial.
- Avoid using on extremely dirty or uneven surfaces that might compromise suction.
9. Consells d'usuari
- For very dirty windows, perform a dry cleaning cycle first to remove loose dust and debris, then follow with a wet cleaning cycle.
- Use distilled water or a recommended glass cleaning solution to prevent streaks and mineral buildup in the spray nozzle.
- Always start the robot at the top of the window to allow gravity to assist in the cleaning process and ensure complete coverage.
- Regularly check the cleaning cloths for saturation and replace them with fresh ones as needed for optimal results.
- The robot is designed for various surfaces; however, always test on a small, inconspicuous area first, especially for new or delicate surfaces.
10. Garantia i Suport
The Liectroux HCR-10 Robot Window Cleaner comes with a 5-year warranty, reflecting our commitment to quality and durability. For any technical assistance, warranty claims, or product inquiries, please contact Liectroux customer support through your retailer or the official Liectroux weblloc.
Si us plau, conserveu el comprovant de compra per motius de garantia.
