1. Producte acabatview
This manual provides instructions for the LASER TREE 12V and 24V power adapters, designed to supply stable power to various compatible devices such as laser modules, engraver heads, air pumps, and other wood working tools. Please read this manual carefully before use to ensure safe and efficient operation.
Models disponibles:
- 12V 4A EU Plug (Model: YU1204)
- 12V 4A US Plug (Model: YU1204)
- 24V 2A EU Plug (Model: YU2402)
- 24V 2A US Plug (Model: YU2402)
- 24V 5A EU Plug (Model: BS-SL120W4824U)
- 24V 5A US Plug (Model: BS-SL120W4824U)
2. Informació de seguretat
- Always verify that the voltage and current requirements of your device match the output specifications of the power adapter.
- Use only the correct plug type (EU or US) for your region's electrical outlets.
- No exposeu l'adaptador a l'aigua, la humitat ni a temperatures extremes.
- Do not open or attempt to repair the adapter. Refer servicing to qualified personnel.
- Ensure adequate ventilation around the adapter during operation to prevent overheating.
- Mantenir fora de l'abast dels nens.
3. Configuració i connexió
Follow these steps to properly set up and connect your power adapter:
- Identify Your Adapter: Check the label on your power adapter to confirm its voltage (12V or 24V) and current (2A, 4A, or 5A) output, as well as the plug type (EU or US).
- Verifiqueu la compatibilitat del dispositiu: Ensure your laser module, engraver head, air pump, or other tool requires the exact voltage and current provided by your specific LASER TREE power adapter. Mismatched power can damage your device.
- Connecta't al dispositiu: Plug the DC output connector of the power adapter into the corresponding power input port on your device. Ensure a secure connection.
- Connecteu-vos a la presa de corrent: Insert the AC input plug of the power adapter into a compatible wall socket.
- Encès: If your device has a power switch, turn it on. The adapter should now be supplying power to your device.
Adapter Visuals:
4. Instruccions de funcionament
The LASER TREE power adapter is designed for straightforward operation:
- Once connected as described in the Setup section, the adapter will provide continuous power to your device.
- Ensure your device's power indicator (if any) lights up, confirming it is receiving power.
- Operate your connected device according to its own instruction manual.
- To disconnect power, first turn off your device, then unplug the adapter from the wall socket.
Product in Use (Demonstration Video):
This video demonstrates a LASER TREE laser module in operation, which is compatible with these power adapters. It showcases engraving and cutting capabilities, illustrating the type of equipment these adapters power.
5. Manteniment
Proper maintenance ensures the longevity and safe operation of your power adapter:
- Neteja: Feu servir un drap suau i sec per netejar l'exterior de l'adaptador. No utilitzeu netejadors líquids ni dissolvents.
- Emmagatzematge: Quan no l'utilitzeu, emmagatzemeu l'adaptador en un lloc fresc i sec, lluny de la llum solar directa i de la humitat.
- Inspecció del cable: Regularly inspect the power cord and connectors for any signs of damage, fraying, or exposed wires. If damage is found, discontinue use immediately and replace the adapter.
- Ventilació: Ensure the adapter is not covered or placed in an enclosed space during operation to allow for proper heat dissipation.
6. Solució De Problemes
If you encounter issues with your power adapter, refer to the following common problems and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha alimentació del dispositiu | Adapter not plugged in; Wall outlet faulty; Device power switch off; Damaged cable/adapter. | Ensure adapter is securely plugged into a working wall outlet. Check device power switch. Inspect cables for damage. Try a different outlet. |
| Sobreescalfament de l'adaptador | Poor ventilation; Overload; Internal fault. | Ensure adapter is in a well-ventilated area. Verify device power requirements do not exceed adapter's capacity. Discontinue use if overheating persists and contact support. |
| Device not functioning correctly | Vol incorrectetage/current adapter used; Faulty device. | Double-check that the adapter's output matches your device's input requirements. Test the device with another known-good power source if possible. |
7. Especificacions
| Característica | Descripció |
|---|---|
| Nom de marca | Laser Tree |
| Números de model | YU1204 (12V), YU2402 (24V 2A), BS-SL120W4824U (24V 5A) |
| Entrada Voltage | CA 100-240V, 50/60Hz |
| Input Current (YU1204, YU2402) | 0.65A |
| Input Current (BS-SL120W4824U) | 2.5A |
| Vol. De sortidatage / Actual | DC 12V 4A, DC 24V 2A, DC 24V 5A (depending on model) |
| Certificació | CE |
| Origen | Xina continental |
8. Consells d'usuari
- Comproveu la compatibilitat: Abans de la compraasing or connecting, always confirm the voltage (V) i amperage (A) requirements of your device. Using an adapter with incorrect specifications can lead to damage or poor performance.
- Gestió de cables: Keep power cables tidy and untangled to prevent damage and tripping hazards. Avoid bending cables sharply.
- Només per a ús interior: These adapters are designed for indoor use. Do not use them in outdoor or wet environments.
- Desconnecteu quan no estigui en ús: For safety and energy saving, unplug the adapter from the wall when the device is not in use for extended periods.
9. Garantia i Suport
LASER TREE is committed to providing high-quality products and customer satisfaction.
Informació de la garantia:
- Garantia de qualitat: Our products are 100% original, high quality, trustworthy, and genuinely guaranteed.
- Devolucions: Gaudeix de 7 dies per retornar-ho si tens algun problema de qualitat.
Atenció al client:
For any questions about your order or product, please feel free to contact LASER TREE Official Store. We offer timely online service to solve various problems for you.
