1. Introducció
This manual provides essential information for the safe and efficient operation of your ANERN Hybrid Solar Inverter. Please read it thoroughly before installation and use. The AN-SCI-ECO series hybrid solar inverter is designed to integrate solar power, utility power, and battery power to provide continuous power to your home or business. It features a pure sine wave output, a built-in MPPT solar charger, and supports various battery types.
2. Informació de seguretat
ADVERTIMENT: High Voltage! All electrical installations must be performed by qualified personnel in accordance with local electrical codes.
- Assegureu-vos de posar a terra correctament l'inversor.
- Do not connect or disconnect lines at will after power is applied. Always install circuit breakers for all lines.
- Do not attempt to open or repair the inverter yourself. Refer to qualified service personnel.
- Mantingueu l'inversor allunyat de materials inflamables i assegureu-vos una ventilació adequada.
- Do not connect the battery after the utility is turned on.
3. Producte acabatview
The ANERN Hybrid Solar Inverter is a versatile power solution for various applications. It features an upgraded MPPT controller, pure sine wave output, and a built-in anti-dust kit for durability.
3.1 Característiques clau
- Self-consumption and feed-in to the grid (for 4.2KW and 6.2KW models).
- Inverter can run without a battery (PV voltage must exceed 360VDC).
- Restauració amb una sola clau a la configuració de fàbrica.
- Activació automàtica de la bateria de liti integrada.
- Built-in 120A MPPT solar controller.
- Max 6200W (for 3.6KW) & 6500W (for 6.2KW) solar charge.
- Vol d'entrada fotovoltaica altatagrang e (90-450VDC).
- Kit antipols integrat per a entorns durs.
- Disseny intel·ligent de càrrega de la bateria per optimitzar la durada de la bateria.
- Dual AC Output capability.
- WIFI monitoring available for iOS and Android devices.
3.2 Physical Components and Dimensions
1. LCD display, 2. Status indicator, 3. Charging indicator, 4. Fault indicator, 5. Function buttons, 6. Power on/off switch, 7. AC input, 8. Main output, 9. Second output, 10. Battery input, 11. PV input, 12. Anti dust kit, 13. RS-232 communication port / WiFi-port.
4. Configuració i instal·lació
Proper installation is crucial for the safe and optimal performance of your inverter. Always consult a qualified electrician for installation.
4.1 Diagrama del sistema
4.2 Esquema de cablejat
4.3 Notes d'instal·lació
- Assegureu-vos que totes les connexions estiguin ben assegurades i polaritzades correctament.
- Install appropriate circuit breakers for all AC and DC lines to protect against overcurrent.
- Mount the inverter in a well-ventilated area, away from direct sunlight and moisture.
- The starting power of inductive load electrical appliances should be at least three times the rated power of the appliances to avoid inverter damage. Select a suitable model before purchasing.
5. Funcionament
5.1 Dual Output Function
The inverter features main and secondary AC outputs. Under normal conditions, both outputs are active. However, the main output will be disconnected, and only the secondary output will remain active under these two conditions:
- When there is no solar power input and no mains power input.
- Quan la bateria voltage drops below 44V (configurable between 41V and 46V).
This feature allows you to prioritize essential loads connected to the secondary output, extending their operation time during low battery conditions.
5.2 Inverter Start-up and Shutdown Sequence
Start-up Sequence:
- Enceneu l'interruptor de la bateria.
- Engegueu l'inversor.
- Turn on the PV (solar panel) switch.
- Turn on the mains (utility) switch.
- Turn on the load switches.
Seqüència d'apagada:
- Turn off the load switches.
- Turn off the PV (solar panel) switch.
- Turn off the mains (utility) switch.
- Apagueu l'inversor.
- Finally, turn off the battery switch.
5.3 WIFI Monitoring
The inverter supports WIFI monitoring, allowing you to control and monitor the system's operation via a mobile phone application (PVguarder APP) or web interface (PVguarder Web).
6. Manteniment
- Regularly inspect the inverter for any visible damage, loose connections, or signs of overheating.
- Keep the inverter's ventilation openings clear of dust and debris to ensure proper cooling. The built-in anti-dust kit helps, but periodic cleaning is still recommended.
- Check battery terminals for corrosion and ensure they are clean and tight.
- Monitor the system's performance via the LCD display or WIFI app for any unusual readings.
- For any internal maintenance or repairs, contact qualified service personnel.
7. Resolució de problemes (FAQ)
- Q: Does the inverter require a battery to start?
- A: No, it can start without a battery, but the solar panel voltage should exceed 360VDC in that configuration.
- Q: Can it directly supply power to the load?
- A: Yes, it can directly supply power to the load.
- Q: Can the inverter be connected to the grid?
- A: Yes, it is a hybrid inverter that supports both off-grid and on-grid connections. PV power prioritizes the load, then charges the battery, and any excess can be fed into the grid (subject to local policies). Note: 1600W and 3000W models cannot feed remaining power to the grid.
- Q: How many solar panels are needed?
- A: To start normally, the solar panel voltage is recommended to be 300V-400V, not exceeding 500V. For PRO-3.6KW/PLUS-6.2KW models, the total solar panel power should not exceed 6.2KW/6.5KW respectively. For example, 10 pieces of 250W 30V solar panels connected in series would be suitable.
- Q: Can inverters be connected in series or parallel?
- A: No, these inverters cannot be connected in series or parallel.
- Q: Is this a high-frequency or low-frequency inverter?
- A: It is a high-frequency inverter.
- Q: Can the utility power the inverter when there is no sun?
- A: Yes, the utility can power the inverter.
- Q: What types of batteries can be used?
- A: Lead-acid, gel, Lithium Iron Phosphate (LiFePo4), and other lithium batteries can be used. A 24V battery is for the 3.6KW model, and a 48V battery is for the 6.2KW model. The battery capacity should not be less than 100AH.
- Q: Can it be used with air conditioners, water pumps, and wind turbines?
- A: It can be used with air conditioners, but not with water pumps or wind turbines.
8. Especificacions
The following table details the specifications for the ANERN Hybrid Solar Inverter AN-SCI-ECO series:
| Categoria | Paràmetre | SCI-ECO-3600 | SCI-ECO-4200 | SCI-ECO-6200 |
|---|---|---|---|---|
| General | Potència nominal | 3600W | 4200W | 6200W |
| Potència màxima d'entrada fotovoltaica | 6200W | 6500W | ||
| Interfície de comunicació | WIFI | |||
| PV Input (DC) | DC nominal Voltage/Max DC Voltage | 360VDC/500VDC | ||
| Inici Voltage/Volum d'alimentació inicialtage | 90VDC/120VDC | |||
| MPPT DC Voltage Rang | 60-500VDC | |||
| Number of MPPT Trackers/Max Input Current | 1/18A | 1/22A | ||
| Grid Output (AC) | Vol. de sortida nominal de CAtage | 220/230 / 240VAC | ||
| Vol. De sortida de CAtage Rang | 195-253VAC | |||
| Corrent nominal de sortida de CA | 15.7A | 18.2A | 26.9A | |
| Factor de potència | >0.99 | |||
| Interval de freqüència de la xarxa d'alimentació | 49-51±1Hz / 59-61±1Hz | |||
| Eficiència | Màxima eficiència de conversió (DC/AC) | 97% | ||
| Two Loads Output Power | Càrrega completa | 3600W | 4200W | 6200W |
| Càrrega principal màxima | 3600W | 4200W | 6200W | |
| Càrrega màxima de segona velocitat (mode bateria) | 1200W | 1400W | 2067W | |
| Vol. de tall de càrrega principaltage | 22VDC | 44VDC | ||
| Retorn de càrrega principal Voltage | 26VDC | 52VDC | ||
| Funcionament fora de xarxa | AC Startup Voltage/Auto Restart Voltage | 120-140 V CA/180 V CA | ||
| Vol d'entrada de CA acceptabletage Rang | 90-280VAC o 170-280VAC | |||
| Corrent d’entrada de CA màxim | 30A | 30A | 40A | |
| Freqüència nominal de funcionament | 50/60Hz | |||
| Potència de sobretensió | 7200W | 7200W | 12400W | |
| Consum d'energia sense càrrega | 30W | 35W | 50W | |
| Sortida en mode de bateria (CA) | Volum de sortida nominaltage | 220/230 / 240VAC | ||
| Forma d'ona de sortida | Ona sinusoïdal pura | |||
| Eficiència (DC a AC) | 93% | |||
| Bateria i carregador | DC nominal Voltage | 24VDC | 48VDC | |
| Corrent de càrrega màxim (solar a CA) | 120A | |||
| Corrent de càrrega màxima de CA | 100A | |||
| Ambiental | Humitat | 5% a 95% d'humitat relativa (sense condensació) | ||
| Temperatura de funcionament | –10°C - 50°C | |||
| Temperatura d'emmagatzematge | –15°C - 60°C | |||
| Física | Mides, P x A x A (mm) | 110 * 334 * 423 mm | ||
| Pes | Pes net (kg) | 9 | 9.5 | 10 |
9. Consells d'usuari
- To achieve stable operation and save on electricity bills, it is recommended to connect a battery. When the operating mode is set to SBU (Solar-Battery-Utility), the system will prioritize solar power, then battery power, and use utility power only as a last resort.
- When selecting the inverter power for household appliances, especially those with inductive loads (e.g., refrigerators, washing machines, air conditioners), ensure the inverter's power is at least three times the total power of these inductive loads to prevent startup issues or damage.
10. Garantia i Suport
For warranty information, technical support, or service inquiries, please contact your vendor or the manufacturer directly. Ensure you have your product model number and purchase details available when seeking support.
