GENERICO AL-M310 / AL-M320 Drum Unit

Manual d'instruccions

GENERICO AL-M310 / AL-M320 Compatible Drum Unit

Model: AL-M310 / AL-M320 Drum Unit (C13S110082)

1. Introducció

This manual provides essential information for the safe and effective use of your new GENERICO AL-M310 / AL-M320 compatible drum unit. Please read these instructions carefully before installation and retain them for future reference. This drum unit is designed to be compatible with specific Epson WorkForce printer models, ensuring high-quality print output.

2. Producte acabatview

The GENERICO AL-M310 / AL-M320 drum unit is a high-quality, compatible replacement for the Epson WorkForce C13S110082 drum unit. It is an essential component for laser printing, responsible for transferring toner to the paper. This unit is designed to deliver consistent performance and a high page yield.

GENERICO AL-M310 / AL-M320 Compatible Drum Unit and Packaging
Image 1: The GENERICO AL-M310 / AL-M320 compatible drum unit and its packaging.

3. Configuració i instal·lació

  1. Unpack the Drum Unit: Carefully remove the new drum unit from its packaging. Avoid touching the green drum surface, as fingerprints can affect print quality.
  2. Apagar la impressora: Ensure your Epson WorkForce printer is turned off and unplugged from the power source.
  3. Obriu la coberta de la impressora: Open the front cover or access panel of your printer as instructed in your printer's specific user manual.
  4. Remove Old Drum Unit: Gently pull out the old drum unit assembly from the printer. Place it on a clean, flat surface, preferably on a piece of paper to avoid toner spills.
  5. Install New Drum Unit: Insert the new GENERICO drum unit into the printer, aligning it with the guides. Push it firmly until it clicks into place.
  6. Tanqueu la coberta de la impressora: Close the printer cover or access panel securely.
  7. Engegar la impressora: Plug the printer back in and turn it on. The printer may perform a self-test or calibration.
  8. Imprimeix la pàgina de prova: Imprimiu una pàgina de prova per confirmar la instal·lació correcta i la qualitat d'impressió.

Nota: Always refer to your specific Epson WorkForce printer's manual for detailed instructions on replacing the drum unit, as procedures may vary slightly between models.

4. Instruccions de funcionament

Once installed, the GENERICO AL-M310 / AL-M320 drum unit operates automatically as part of your printer's normal function. It works in conjunction with the toner cartridge to produce prints. No special operating procedures are required for the drum unit itself beyond proper installation.

5. Manteniment

  • Manipulació: Always handle the drum unit by its designated handles or edges. Avoid touching the photosensitive drum surface directly.
  • Emmagatzematge: Store unused drum units in their original, sealed packaging in a cool, dry place away from direct sunlight and extreme temperatures.
  • Neteja: If print quality issues arise due to dust or debris on the drum, consult your printer's manual for instructions on how to clean the drum unit. Typically, a soft, lint-free cloth can be used, but direct contact with the drum surface should be minimized.
  • Substitució: Replace the drum unit when your printer indicates it is nearing the end of its life or when print quality significantly degrades despite troubleshooting.

6. Solució De Problemes

If you encounter issues after installing the drum unit, consider the following:

  • Print Quality Issues (Streaks, Spots, Fading):
    • Ensure the drum unit is correctly seated in the printer.
    • Check if the toner cartridge is properly installed and has sufficient toner.
    • Perform a printer cleaning cycle or calibration through your printer's control panel or software.
    • Inspect the drum surface for any visible damage or foreign objects (e.g., paper bits).
  • Error Messages (Drum Unit Error, Replace Drum):
    • Verify the drum unit is installed correctly. Remove and reinsert it.
    • Reinicieu la impressora.
    • Ensure you have installed the correct drum unit model for your printer.

If problems persist, consult your Epson WorkForce printer's user manual or contact customer support.

7. Especificacions

CaracterísticaDetall
Tipus de producteCompatible Drum Unit
MarcaGENERICO
Compatible OEM PartEpson C13S110082
Models d'impressora compatiblesEpson WorkForce AL-M310DN, AL-M310DN Series, AL-M310DTN, AL-M320DN, AL-M320DN Series, AL-M320DTN
Rendiment de pàgina (negre)Fins a 100,000 pàgines

8. Consells d'usuari

No specific user tips are available from reviews or Q&A for this product at this time. For optimal performance, always ensure your printer's firmware is up to date and use high-quality toner cartridges with this drum unit.

9. Garantia i Suport

For any questions regarding the installation, performance, or compatibility of this GENERICO drum unit, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase.

Documents relacionats - AL-M310 / AL-M320 Drum Unit

Preview Instrucciones de Uso: Cargador Genérico para Consola Portátil
Guía de instrucciones detallada para un cargador genérico de consola portátil, cubriendo contenido del paquete, recomendaciones de uso, seguridad, compatibilidad y advertencias.
Preview Generico HK10 Ultra 3 Max Smart Watch User Manual - Features, Setup, and Troubleshooting
Comprehensive user manual for the Generico HK10 Ultra 3 Max Smart Watch, detailing product overview, specifications, setup, features, maintenance, and troubleshooting. Compatible with Android and iOS.
Preview GENERICO BAM303 Gas Kitchen Torch - Technical Data Sheet & User Guide
Comprehensive technical data sheet and user guide for the GENERICO BAM303 butane-powered kitchen torch. Learn about its features, safety, usage, and refilling process for culinary applications, camping i projectes de bricolatge.
Preview GENERICO YT-08255 Llave de Cadena para Filtro de Aceite - Especificación Técnica
Especificación técnica detallada de la Llave de Cadena GENERICO modelo YT-08255, una herramienta de lubricación automotriz con rango de trabajo de 60-160 mm. Incluye características como doble cadena, ángulo ajustable y mango de goma.
Preview Ficha Técnica: Tijeras de Acero Inoxidable para Mascotas MAS69
Ficha técnica detallada de las tijeras de acero inoxidable GENERICO MAS69, diseñadas para el corte de pelo de mascotas, uso profesional en veterinarias y pet grooming.
Preview Carbone ZP-3033-DISPENSADOR Botella Dispensadora de Plástico de 500ml para Jabón y Gel Antibacterial
Especificaciones técnicas de la Carbone ZP-3033-DISPENSADOR, una botella dispensadora transparente de plástico de 500ml para jabón líquido y gel antibacterial, ideal para zonas de alto tráfico.