1. Introducció
This manual provides essential information for the installation, operation, and maintenance of your BOSCH power tool switch trigger. This component is a replacement part designed for specific BOSCH cordless drill/driver models, ensuring proper functionality and safety of your tool.
Compatible BOSCH Tool Models:
- GSR 120-LI
- GSB 1080-2-LI
- GSR 1080-2-LI
- GSR 1200-2-LI
- GSB 120
- GSB 120-LI
- GSR 120-LI
2. Especificacions
| Atribut | Valor |
|---|---|
| Nom de marca | Bosch |
| Número de model | 2 609 125 169, 2 607 202 520 |
| Origen | Xina continental |
| Subministraments de bricolatge | Elèctric |
| Voltage/Current Rating | 10.8VDC 20A (for model 2 609 125 169) |
3. Identificació de peces
Refer to the images below to identify the specific switch trigger model you have.
4. Instal·lació
Replacing a power tool switch trigger requires careful handling and basic electrical knowledge. If you are not confident in performing this task, it is recommended to seek assistance from a qualified technician or an authorized BOSCH service center.
Precaucions de seguretat:
- Always disconnect the power tool from its power source (remove battery pack) before attempting any repairs or installations.
- Utilitzeu equips de protecció individual (EPI) adequats, com ara ulleres i guants de seguretat.
- Ensure your workspace is clean, well-lit, and free from obstructions.
Passos d'instal·lació (Guia general):
- Desmuntatge: Obriu amb cura la casing of your BOSCH power tool. This usually involves removing screws. Note the position of all components and wiring before disconnecting anything.
- Desconnecta l'interruptor antic: Identify the existing switch trigger. Disconnect all wires connected to it. Take photos or make a diagram of the wiring connections for reference.
- Treure l'interruptor antic: Once disconnected, remove the old switch from its housing.
- Instal·leu un nou interruptor: Place the new BOSCH switch trigger (Model 2 609 125 169 or 2 607 202 520) into the tool's housing.
- Connecteu el cablejat: Connect the wires to the new switch trigger according to the diagram or photos you took during disassembly. Ensure all connections are secure and correct.
- Remuntatge: Carefully close the tool casing, ensuring no wires are pinched and all components are properly seated. Secure the casing amb els cargols.
- Funcionalitat de prova: Reinsert the battery pack and perform a brief test to ensure the tool operates correctly and the switch functions as expected.
5. Funcionament
The switch trigger controls the power to your BOSCH cordless drill/driver. Its operation is straightforward:
- Activació: Press the trigger to activate the tool. The further you press, the faster the tool will operate (variable speed control).
- Desactivació: Deixeu anar el disparador per aturar l'eina.
- Control de direcció: Ensure the forward/reverse selector (if present on your tool) is set to the desired direction before operating the trigger.
- Botó de bloqueig: Some tools may have a lock-off button to prevent accidental starting. Ensure this button is disengaged before pressing the trigger.
6. Manteniment
Proper maintenance of your power tool and its components, including the switch trigger, ensures longevity and safe operation.
- Neteja: Keep the switch trigger and surrounding areas free from dust, debris, and moisture. Use a dry cloth to wipe down the tool. Avoid using solvents or harsh chemicals.
- Inspecció: Periodically inspect the switch trigger for any signs of damage, wear, or loose connections. If any issues are found, address them promptly.
- Emmagatzematge: Store your power tool in a clean, dry place away from extreme temperatures and direct sunlight.
7. Solució De Problemes
If your power tool is not functioning correctly after replacing the switch trigger, consider the following common issues:
- L'eina no s'inicia:
- Ensure the battery pack is fully charged and properly inserted.
- Check all wiring connections to the switch trigger and motor for looseness or incorrect placement.
- Verify that the forward/reverse selector is not in the neutral (locked) position. - Funcionament intermitent:
- Loose wiring connections can cause intermittent power. Recheck all connections.
- The switch itself might be faulty. If all connections are secure and the battery is charged, the switch may need further inspection or replacement. - Fum o olor de cremat:
- Immediately disconnect the battery pack. This indicates a serious electrical issue. Do not attempt to use the tool. Seek professional repair.
For complex issues, consult an authorized BOSCH service center.
8. Consells d'usuari
No hi havia consells específics per a l'usuari disponibles del servei de clients.views or Q&A for this product. Always follow the general safety guidelines provided by BOSCH for your power tool.
9. Garantia i Suport
For information regarding warranty coverage, technical support, or authorized service centers, please refer to the documentation provided with your original BOSCH power tool or visit the official BOSCH website. You may also contact the seller for product-specific inquiries.
