Manual d'usuari de l'arrencador de cotxe YABER 4000A 26800mAh

1. Introducció

Thank you for choosing the YABER Car Jump Starter. This device is designed to provide a reliable solution for starting your vehicle's battery, acting as a powerful power bank, and offering emergency lighting. This manual will guide you through the proper use, maintenance, and safety precautions to ensure optimal performance and longevity of your jump starter.

Having this device in your car's trunk provides peace of mind, ensuring you can start your car and get home without waiting for roadside assistance, especially when facing issues like a battery left unused for too long or low temperatures affecting battery performance.

Common scenarios where the YABER Jump Starter is essential.

2. Advertiments de seguretat importants

Si us plau, llegiu i comprengui tota la informació de seguretat abans d'utilitzar aquest producte. Si no segueix aquestes instruccions, pot provocar descàrregues elèctriques, incendis o lesions greus.

Smart Clamps Protection Features:

The YABER Jump Starter is equipped with smart clamps that incorporate multiple protection mechanisms to ensure safe operation:

• Protecció d'alta temperatura: Evita el sobreescalfament durant el funcionament.
• Protecció de connexió inversa: Alerta i evita danys si s'està escalfant.amps estan connectats incorrectament.
• Protecció sobre corrent: Mesures de seguretat contra el flux excessiu de corrent.
• Protecció contra càrrec invers: Impedeix que el corrent torni a l'arrencador des de la bateria del vehicle.
• Protecció de polaritat inversa: Ensures correct polarity connection.
• Protecció per sobre descàrrega: Protects the internal battery from deep discharge.
• Protecció de sobrecàrrega: Evita la sobrecàrrega de la bateria interna.
• Protecció contra curtcircuits: S'apaga automàticament en cas de curtcircuit.

L'intel·ligent clamps provide multiple layers of safety.

Visual representation of the smart clamp protection features.

Precaucions generals de seguretat:

• No submergiu el producte en aigua.
• No utilitzeu el producte en atmosferes explosives, com ara en presència de líquids, gasos o pols inflamables.
• No modifiqueu ni desmunteu el producte.
• Mantenir fora de l'abast dels nens.
• Feu servir només el llapis intel·ligent proporcionat.amps i cables.

3. Contingut del paquet

Si us plau, comproveu el paquet per veure si hi ha els elements següents:

• Car Jump Starter (YA40) x 1
• Protective Smart Clamps (Red = positive; Black = negative) x 1
• Cable USB tipus C x 1
• Inflator Hose x 1 (if applicable to your model variant)
• Manual d'usuari x 1
• Caixa d'emmagatzematge x 1

The YABER Jump Starter and its included accessories.

4. Característiques del producte

The YABER Car Jump Starter is a versatile device offering multiple functionalities:

• Potent arrencador de salts: Delivers 4000A peak current, capable of starting all 12V gasoline engines and up to 10.0L diesel engines.
• Banc d'energia d'alta capacitat: Features a 26800mAh battery capacity with two USB outputs (5V/2.4A, 9V/2A) and a USB-C input (5V/9V 2A) for fast charging of mobile devices.
• Sortida de CC de 12 V/10 A: Provides power for various 12V accessories.
• Llum d'emergència LED: Integrated flashlight with 3 modes: Illumination (Normal), Strobe, and SOS for emergency situations.
• Funcionament a temperatures extremes: Designed to work reliably in temperatures ranging from -20℃ to +60℃ (-4°F to 140°F).
• Smart Clamps: Equipped with multiple safety protections as detailed in the Safety Warnings section.

Acabatview of the YABER Jump Starter's multi-functional capabilities.

5. Especificacions

The jump starter is designed for reliable performance in a wide range of temperatures.

6. Configuració i càrrega inicial

Before first use, ensure the jump starter is fully charged. It is recommended to fully charge the device every 3-6 months to maintain battery health, even when not in use.

1. Connect the provided Type-C USB cable to the USB-C input port on the jump starter.
2. Connect the other end of the USB cable to a suitable USB wall adapter (not included) or a powered USB port.
3. The digital display on the jump starter will show the charging progress. Charge until the display shows 100%.

The device supports two-way fast charging, allowing for quick recharging of the unit itself.

7. Instruccions de funcionament

7.1. Arrencada d'un vehicle amb ajuda d'un cable

Assegureu-vos que l'arrencador estigui carregat com a mínim al 50% abans d'intentar engegar un vehicle amb bateria auxiliar.

1. Insereix: Connecteu l'smart clamp cable into the jump starter's 12V jump start port. Ensure it is fully inserted.
2. Connectar: Enganxeu el cl vermell (+).amp al terminal positiu de la bateria del vehicle i al born negre (-)amp al terminal negatiu. El cl intel·ligentamps will indicate if the connection is correct.
3. Inici: Start your car's engine. If it doesn't start immediately, wait 20-30 seconds and try again. Do not crank for more than 3 seconds per attempt.
4. Eliminar: Once the car starts, immediately remove the smart clampde la bateria del cotxe i, a continuació, desendolleu el carregador intel·ligentamp cable de l'arrencador de bateria.

Visual guide for the jump starting process.

The YABER Jump Starter is suitable for a wide range of 12V vehicles.

7.2. Ús com a bateria externa

The jump starter can charge your electronic devices via its USB output ports.

1. Connect your device's USB charging cable to one of the jump starter's USB output ports (USB-1 or USB-2).
2. L'arrencador començarà a carregar el dispositiu automàticament.
3. La pantalla digital mostrarà el percentatge de bateria restanttage.

Charging multiple devices simultaneously with the power bank function.

7.3. Using the LED Emergency Light

The built-in LED light has three modes: Illumination (normal flashlight), Strobe, and SOS.

1. Press and hold the power button for approximately 3 seconds to turn on the Illumination mode.
2. Press the power button briefly to cycle through the modes: Illumination > Strobe > SOS.
3. Press and hold the power button again for 3 seconds to turn off the light.

The LED light provides versatile illumination for various situations.

Detallada view of the LED emergency light modes.

8. Manteniment i emmagatzematge

• Càrrega: Recarrega l'arrencador cada 3-6 mesos, fins i tot si no l'utilitzes, per allargar la durada de la bateria.
• Neteja: Feu servir un drap sec i suau per netejar el dispositiu. No utilitzeu productes químics agressius ni materials abrasius.
• Emmagatzematge: Store the device in a cool, dry place away from direct sunlight, heat sources, and moisture. Keep it in its protective storage box when not in use.
• Temperatura: Avoid storing the device in environments outside its operating temperature range (-20℃ to +60℃).

9. Solució De Problemes

El dispositiu no s'encén:

• Ensure the device is charged. Connect it to a power source using the Type-C cable.

Vehicle will not jump start:

• Comproveu que el claviller intel·ligentamp cable is fully inserted into the jump starter.
• Ensure the red (+) and black (-) clamps are connected correctly to the vehicle battery terminals. The smart clamps should indicate a correct connection.
• Verify that the jump starter has sufficient charge (at least 50%).
• If the vehicle battery is completely dead, it may take a few attempts. Wait 20-30 seconds between attempts.
• Si el cl intel·ligentamps show an error, refer to the smart clamp's indicator guide (if available) or disconnect and reconnect carefully.

Devices not charging from power bank:

• Ensure the jump starter has sufficient charge.
• Check that the USB cable is securely connected to both the jump starter and your device.
• Prova amb un cable o port USB diferent.

10. Consells d'usuari

• Always keep the jump starter charged, especially before long trips or during winter months when car batteries are more prone to failure.
• Familiarize yourself with the smart clamp indicators. They are designed to provide immediate feedback on connection status and potential issues.
• When jump starting, ensure your vehicle's ignition is off before connecting the clamps.
• After a successful jump start, allow your car's engine to run for a few minutes to recharge its battery before turning it off.

11. Garantia i Suport

YABER products are manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included in your package or contact YABER customer service through the official weblloc web o el vostre punt de compra.

Conserveu el vostre comprovant de compra per a reclamacions de garantia.

12. Preguntes freqüents (FAQ)

Q: What power does the device charge? Is it 110V or 220V?

A: The YABER Jump Starter charges via a USB-C input (5V/2A, 9V/2A). You can use any standard USB wall adapter (110V or 220V compatible) with a USB-C output to charge the device. The jump starter itself does not have a direct 110V or 220V input.

Q: Is the product new and does it come with a warranty?

A: Yes, all new YABER products are sold with a manufacturer's warranty. Please refer to the 'Warranty and Support' section for more details.