1. Introducció
The FNIRSI WD-01 SH201 is a versatile wall detector scanner designed to accurately locate various objects hidden behind walls, floors, and ceilings. This device helps prevent damage during drilling, cutting, or installation tasks by identifying studs, metal objects (pipes, rebars), and live AC wires. Its advanced detection capabilities and user-friendly interface make it an essential tool for home decoration, appliance installation, and general maintenance.
2. Característiques
- Detecció de múltiples materials: Locates wood studs, metal (iron, non-ferrous metals like copper, rebars, pipes), and live AC wires.
- Deep Scanning Capability: Detects wood up to 38mm (1.5 inches), AC wires up to 40mm (1.57 inches), metal pipes up to 100mm (3.94 inches), and rebars up to 120mm (4.72 inches).
- HPC Detection Module: Enhanced anti-interference, faster calculation speed, and improved detection accuracy.
- Pantalla LCD clara: Shows target depth, detection center, material type, and battery status.
- Visual & Audio Alerts: Indicator lights (yellow/red for target, green for no target) and continuous beeping when approaching or at the center of a target.
- Posicionament precís: Features a center positioning hole for accurate marking of drilling locations.
- Bateria recarregable: Built-in 300mAh lithium battery with Type-C charging interface.
- Apagat automàtic: S'apaga després de 5 minuts d'inactivitat per estalviar bateria.
- Disseny durador: Anti-slip texture, ABS shockproof shell, and through-type acrylic panel for durability and comfortable grip.
3. Especificacions
| Paràmetre | Valor |
|---|---|
| Max. Detection Depth (Metals) | 120 mm (4.72 polzades) |
| Max. Detection Depth (Non-ferrous metals, Copper) | 100 mm (3.94 polzades) |
| Max. Detection Depth (AC Wire) | 50 mm (2 polzades) |
| Max. Detection Depth (Single-strand copper wire) | 40 mm (1.57 polzades) |
| Max. Detection Depth (Wooden - Precision mode) | 20 mm (0.75 polzades) |
| Max. Detection Depth (Wooden - Depth mode) | 38 mm (1.5 polzades) |
| Apagat automàtic | Després de 5 minuts d'inactivitat |
| Bateria | Bateria de liti recarregable de 300 mAh |
| Port de càrrega | Tipus-C |
| Mida del producte | 137 mm x 82 mm x 38 mm (aprox. 5.39 x 3.23 x 1.50 polzades) |
| Pes del producte | 123 g (aproximadament 0.27 lliures) |
| Material | PC/ABS |
4. Configuració
4.1 Càrrega del dispositiu
- Localitza el port de càrrega tipus C al dispositiu.
- Connect the provided Type-C USB cable to the device and a suitable USB power adapter (not included).
- The battery indicator on the LCD screen will show charging status. Charge until the battery icon indicates full charge.
4.2 Calibratge inicial
For accurate detection, the device needs to be calibrated before each use or when moving to a new scanning area.
- Place the device flat against the wall surface where you intend to scan. Ensure there are no objects, moisture, or other interference in the immediate area.
- Press and hold the Power/Scan button. The device will perform an automatic calibration.
- Wait for the calibration process to complete (usually indicated by a stable display and a beep).
- Un cop calibrat, podeu començar a escanejar.
5. Instruccions de funcionament
The WD-01 SH201 features multiple detection modes for different materials. Always calibrate the device before scanning.
5.1 Comprensió de la pantalla i els controls
- Pantalla de potència: Mostra el nivell actual de la bateria.
- Current Detection Mode: Indicates the active scanning mode (Wood, Metal, AC).
- Probe Signal Strength: Bars indicate the proximity to the detected object.
- Distance from Measured Object to Detection Center: Visual representation of the object's location relative to the device's center.
- Llum indicadora: Changes color based on detection (Green: no target; Yellow/Red: target detected, proximity indicated).
- Depth Display: Shows the estimated depth of the detected object.
- Metal/Cable Detection Icon: Illuminates when metal or AC wires are detected.
- Wooden Fence Detection Icon: Illuminates when wood studs are detected.
- Botó d'escaneig: Initiates scanning.
- Botó de canvi de mode: Toggles between different detection modes.
- Marking Point: A physical indentation for precise marking of detected object centers.
5.2 Selecting a Detection Mode
Press the Mode Switch Button to cycle through the available detection modes:
- Wood Detection (Stud Scan): For locating wooden studs and beams.
- Detecció de metalls: For locating magnetic and non-magnetic metals, including pipes and rebars.
- Detecció de cables de CA: Per detectar cables elèctrics de CA en tensió.
5.3 Realització d'una exploració
- Calibra: Place the device flat against the wall and press the Power/Scan button to calibrate.
- Seleccioneu el mode: Choose the appropriate detection mode using the Mode Switch Button.
- Escaneig: Slowly slide the device horizontally across the surface. Keep it flat against the wall.
- Interpretar els resultats:
- The LCD screen will display the signal strength, estimated depth, and direction to the object.
- The indicator light will change from green to yellow or red as you approach a target.
- A continuous beep indicates the center of the detected object.
- Marca: Once the center of an object is identified, use the marking point on the device to precisely mark the location on the wall.
5.4 Demostració en vídeo
6. Manteniment
- Neteja: Netegeu el dispositiu amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents.
- Emmagatzematge: Guardeu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes. Feu servir la bossa d'emmagatzematge proporcionada per protegir-lo.
- Cura de la bateria: Recharge the battery regularly, even if the device is not in frequent use, to maintain battery health. Avoid fully discharging the battery for extended periods.
- Eviteu la humitat: Do not expose the device to water or high humidity.
7. Solució De Problemes
7.1 Inaccurate Readings / False Positives
- Recalibrar: Always calibrate the device on a clear section of the wall before scanning.
- Condicions de la superfície: Ensure the wall surface is dry and free from excessive dust or debris. High moisture content in walls can affect accuracy.
- Velocitat de moviment: Scan slowly and steadily. Moving too quickly can lead to missed detections or inaccurate readings.
- Interferència: Keep other electronic devices or strong magnetic fields away from the scanner during operation.
7.2 El dispositiu no s'encén
- Comproveu la bateria: Ensure the battery is sufficiently charged. Connect the device to a Type-C charger and allow it to charge for some time.
- Botó d'encesa: Press and hold the Power/Scan button firmly for a few seconds.
7.3 No Detection in AC Mode
- Live Wires Only: The AC mode is designed to detect live, unshielded AC wires. It may not detect non-live wires or wires that are heavily shielded.
- Encès: Ensure the electrical circuit is active and powered on for live wire detection.
8. Consells d'usuari
- Pràctica primer: Before using on a critical project, practice on a known wall section or a piece of drywall with known studs and wires to get familiar with the device's feedback.
- Scan in Multiple Directions: For best accuracy, scan the area horizontally and then vertically. This can help confirm the edges and center of objects.
- Mark Clearly: Use a pencil to lightly mark the edges and center of detected objects. This helps visualize the hidden structure.
- Eviteu les superfícies humides: Moisture can interfere with detection. Ensure the scanning surface is dry.
- La paciència és clau: Move the scanner slowly and steadily. Rushing the scan can lead to missed detections.
9. Garantia i Suport
For warranty information, technical support, or service inquiries, please refer to the contact information provided by your retailer or the official FNIRSI weblloc web. Conserveu el rebut de compra com a comprovant de compra.
