1. Introducció
This manual provides essential information for the safe and effective use of your RadioMaster 6200mAh 2S LiPo Transmitter Battery. This high-capacity LiPo battery is designed to provide extended operation for compatible RadioMaster transmitters, including the TX16S, TX16S MKII, and Boxer models, offering up to 20 hours of duration.
2. Advertiments de seguretat importants
Lithium Polymer (LiPo) batteries require careful handling. Failure to follow these safety instructions can result in fire, personal injury, and property damage.
- No carregueu la bateria sense supervisió: Vigila sempre la bateria durant la càrrega.
- Carregueu sempre la bateria lluny d'objectes inflamables: Ensure a safe charging environment.
- No desmunteu ni modifiqueu aquesta bateria: Tampering with the battery can be dangerous.
- Feu servir només els dispositius de càrrega correctes: Use a LiPo-compatible charger with appropriate settings.
- Corrent de càrrega màxim 2.0A: No supereu aquest corrent de càrrega.
- Do not puncture, drop, short-circuit, or expose the battery to extreme temperatures.
- If the battery swells, leaks, or shows any signs of damage, discontinue use immediately and dispose of it safely.
3. Especificacions
| Característica | Detall |
|---|---|
| Item | 2S 7.4V 6200mAh LiPo Battery |
| Volum nominaltage | 7.4 V |
| Capacitat | 6200 mAh |
| Watt-hora | 45.88 Wh |
| Connectors | JST-XH and XT30 |
| Corrent de càrrega màxima | 2A |
| Dimensions (L x A x A) | 85 mm x 50 mm x 21 mm |
| Pes | 203 g |
| Compatibilitat | RadioMaster Boxer, TX16S, TX16S MKII series transmitters |
4. Configuració i instal·lació
This battery is designed for direct installation into compatible RadioMaster transmitters. Ensure your transmitter is powered off before proceeding.
- Localitzeu el compartiment de la bateria: Refer to your transmitter's user manual to locate and open the battery compartment.
- Connecta la bateria: Carefully connect the XT30 main power connector from the battery to the corresponding port in your transmitter. The JST-XH balance lead is typically used for charging and balancing, and may also connect to an internal balance port if available in your transmitter.
- Bateria segura: Place the battery securely within the compartment, ensuring no wires are pinched.
- Compartiment tancat: Tanqueu la tapa del compartiment de la bateria.
5. Funcionament
Once installed, the battery powers your RadioMaster transmitter. Turn on your transmitter as per its specific instructions. The 6200mAh capacity provides extended usage times, up to 20 hours, depending on your transmitter model and usage patterns.
Monitor your transmitter's battery voltage display regularly to ensure the battery does not discharge below its safe operating voltage (typically 3.3V per cell for LiPo, or 6.6V for a 2S battery). Over-discharging can permanently damage the battery.
6. Instruccions de càrrega
Always follow the safety warnings in Section 2 when charging your LiPo battery.
- Use a LiPo Charger: Connect the battery to a dedicated LiPo balance charger. Use both the XT30 main power connector and the JST-XH balance lead for safe and balanced charging.
- Set Charger Parameters: Configure your charger for a 2S (7.4V) LiPo battery. Set the charging current to a maximum of 2.0A. Charging at a lower current (e.g., 1A or 0.5A) is generally safer and can extend battery life.
- Càrrega del monitor: Never leave the battery unattended while charging. Place it on a non-flammable surface, away from combustible materials.
- Desconnecteu després de la càrrega: Once charging is complete, disconnect the battery from the charger. Do not leave it connected indefinitely.
7. Manteniment i emmagatzematge
- Emmagatzematge Voltage: For long-term storage, charge or discharge the battery to its storage voltage (typically 3.8V per cell, or 7.6V for a 2S battery). Most modern LiPo chargers have a 'Storage' mode.
- Temperatura: Guardeu la bateria en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- Inspecció física: Regularly inspect the battery for any signs of damage, swelling, or leaks. Discontinue use and dispose of damaged batteries safely.
- Eliminació: Dispose of LiPo batteries responsibly according to local regulations. Never throw them in household waste.
8. Solució De Problemes
- La bateria no es carrega: Ensure all connectors (XT30 and JST-XH) are securely plugged into the charger and battery. Verify charger settings are correct for a 2S LiPo battery. Check for any visible damage to the battery or cables.
- Temps d'execució curt: If the battery's run time is significantly shorter than expected, it may be due to aging, damage, or improper charging/storage. Ensure you are not over-discharging the battery during use.
- Inflor de la bateria: If the battery appears swollen, immediately discontinue use and safely dispose of it. Swelling indicates internal damage and a potential fire hazard.
- El transmissor no s'encén: Check that the battery is fully charged and correctly installed in the transmitter. Ensure the XT30 connector is firmly seated.
9. Consells d'usuari
No hi ha consells específics per a l'usuari de reviews or Q&A are available at this time. Always prioritize safety and follow the manufacturer's guidelines for your transmitter and battery.
10. Garantia i Suport
Per obtenir informació sobre la garantia i assistència tècnica, consulteu la pàgina oficial de RadioMaster. weblloc web o poseu-vos en contacte amb el vostre distribuïdor autoritzat. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.
