1. Introducció
This manual provides essential information for the safe and effective use of your Microzone MC8RE and MC9002 2.4G 8CH Remote Control Receivers. These receivers are designed for use with Microzone MC8B transmitters and are suitable for various RC models including fixed-wing aircraft, helicopters, multi-axis aircraft (drones), cars, and boats. Please read this manual thoroughly before operating your equipment.
2. Informació de seguretat
- Always operate your RC model in open areas, away from people, vehicles, and obstacles.
- Ensure all connections are secure before operation to prevent signal loss.
- Verify battery levels of both transmitter and receiver before each use.
- Keep receivers away from water and moisture.
- Do not modify the receiver or its components, as this may void the warranty and compromise safety.
- Engegueu sempre primer el transmissor i després el receptor. Quan l'apagueu, apagueu primer el receptor i després el transmissor.
3. Contingut del paquet
Please check the contents of your package. Depending on your purchase, it should include:
- Microzone MC8RE Receiver (if selected)
- Microzone MC9002 Receiver (if selected)
- Manual d'usuari (aquest document)
4. Producte acabatview
The Microzone MC8RE and MC9002 are 2.4GHz 8-channel receivers designed for reliable communication with compatible Microzone transmitters. They feature a wide voltage design and support both PWM and SBUS signals.
MC8RE Receiver
Figura 4.1: superior view of the Microzone MC8RE receiver, showing the 8 channel ports and the bind button.
Figura 4.2: Detallada view of the MC8RE receiver's channel ports (1-8) and the 'B' (Bind) port.
MC9002 Receiver
Figura 4.3: superior view of the Microzone MC9002 receiver, showing the 8 channel ports and the bind button.
Figura 4.4: Detallada view of the MC9002 receiver's channel ports and M.BUS port.
5. Especificacions
Transmitter Specifications (MC8B - for reference)
| Característica | Especificació |
|---|---|
| Canals | 8 |
| Compatibilitat de models | Fixed-wing, UAV, Helicopter, Cars, Boat |
| Interval de RF | 2405 MHz - 2479 MHz |
| Potència de RF | < 100 MW |
| Corrent de treball | < 150MA |
| Voltage | 4.5 V - 8.5 V |
| Mode de modulació | KSF |
| Sensibilitat | 1024 |
| Sortida de senyal | 8 PWM signals and 1 SBUS signal |
| Analog & External Power | YES (not more than 8V) |
| Volum baixtage Alarma | LED indicator and buzzer alarm |
| Mostra | LCD (Chinese and English menu) |
| Característiques del programari | CH5-CH8 arbitrary replacement, CH1-CH8 signal detection, M1/M2 throttle swap, flight time setting, main screen lock, factory reset |
| Helicopter Function | 90/120 degree CCPM, gyro sensitivity adjustment |
| Poder | 6V 1.5AA*4 |
| Certificats | FCC, CE_RED |
| Dimensions | 215 mm * 105 mm * 220 mm |
| Pes (brut) | 580 g |
Receiver Specifications (MC8RE & MC9002)
| Característica | Especificació |
|---|---|
| Nom del producte | MC8RE Receiver / MC9002 Receiver |
| Longitud de l'antena | 110 mm |
| Canals de sortida | 8 PWM signal channels and 1 SBUS signal channel |
| Freqüència de recepció | 2401 MHz - 2479 MHz |
| Aplicació | MC8A, MC8B remote control, fixed wing models, UAV, helicopter models, trams and tanker models, ship models |
| Dimensions | 42 mm * 28 mm * 12 mm |
| Pes | 12 g |
6. Configuració
6.1 Vinculació del receptor al transmissor
To establish communication between your Microzone receiver (MC8RE or MC9002) and your Microzone MC8B transmitter, follow these steps:
- Ensure your transmitter (e.g., MC8B) is powered off.
- Connect a bind plug (not included, typically a jumper) to the 'B' (Bind) port on your receiver.
- Apply power to the receiver (2V-9V DC). The receiver's LED indicator should start flashing rapidly, indicating it's in bind mode.
- While holding down the bind button on your transmitter, power on the transmitter.
- El LED del receptor hauria d'estar fix, cosa que indica que la connexió s'ha realitzat correctament.
- Release the bind button on the transmitter, then power off both the receiver and the transmitter.
- Traieu el connector de connexió del receptor.
- Power on the transmitter first, then the receiver. The receiver's LED should immediately turn solid, confirming the bind.
6.2 Connecting Servos and Other Components
Connect your servos, ESC, and other components to the corresponding PWM channels (1-8) on the receiver. The SBUS port can be used for flight controllers that support SBUS input.
- Canal 1-8: Connect standard PWM servos or ESCs.
- SBUS Port: Connect to a flight controller for single-wire digital signal transmission.
- Entrada d'alimentació: The receiver supports a wide voltage range (DV 2V-9V). Ensure your power source is within this range.
7. Instruccions de funcionament
7.1 Funcionament bàsic
- After successful binding and connecting all components, power on your transmitter, then your model.
- Test all control surfaces and functions to ensure they respond correctly to transmitter inputs.
- Perform a range check before the first flight of a new model or in a new location.
7.2 Transmitter Features (MC8B)
The MC8B transmitter offers several configurable features:
- Volum baixtage Alarma: The transmitter provides an LED indicator and buzzer alarm for low voltage conditions, configurable based on battery type.
- Menú LCD: Access Chinese and English menus for settings adjustments.
- Channel Assignment: Channels 5-8 can be arbitrarily reassigned.
- Throttle Swap (M1/M2): Allows switching between Mode 1 and Mode 2 throttle configurations.
- Flight Time Setting: Set a timer for flight duration.
- Main Screen Lock: Lock the main screen to prevent accidental changes.
- Helicopter Functions: Adjust 90-degree and 120-degree CCPM (Cyclic/Collective Pitch Mixing) and gyro sensitivity.
8. Manteniment
- Keep receivers clean and free from dust, dirt, and debris.
- Store receivers in a dry, cool environment when not in use.
- Regularly inspect antenna wires for damage. A damaged antenna can significantly reduce range and signal reliability.
- Assegureu-vos que totes les connexions estiguin estancades i lliures de corrosió.
9. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Receptor no vinculant | Incorrect binding procedure, transmitter not in bind mode, receiver not powered correctly. | Review Section 6.1 and repeat the binding process carefully. Ensure receiver has adequate power. |
| Sense resposta de control | Receiver not bound, incorrect servo connections, low battery voltage, damaged receiver/transmitter. | Check binding, verify all connections, ensure batteries are charged. Test with another receiver/transmitter if possible. |
| Pèrdua de senyal intermitent | Antenna placement, interference, range issues, damaged antenna. | Ensure receiver antenna is clear of carbon fiber or metal, positioned correctly. Avoid operating near strong RF sources. Check antenna for damage. |
| Vol baixtage alarm on transmitter | Transmitter battery is low. | Replace or recharge transmitter batteries. |
10. Consells d'usuari
- For optimal range and signal quality, ensure the receiver antenna is mounted as far as possible from metal parts, motors, and ESCs.
- When using multiple receivers, ensure each is correctly bound to its respective transmitter to avoid cross-interference.
- Regularly check for firmware updates for your transmitter and receiver on the manufacturer's weblloc per garantir el millor rendiment i compatibilitat.
11. Garantia i Suport
Per obtenir informació sobre la garantia, assistència tècnica o consultes sobre el servei, poseu-vos en contacte amb el vostre distribuïdor o directament amb el fabricant. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.
