Introducció
Thank you for choosing the DUTRIEUX 100 LED Solar Wall Light. This solar-powered, four-sided wall lamp is designed to provide efficient and reliable outdoor lighting for your garden, patio, garage, or pathways. Featuring intelligent light control, a motion sensor, and a durable, waterproof design, it offers a convenient and eco-friendly lighting solution without the need for external wiring or electricity.
Davant view of the 100 LED Solar Wall Light.
Configuració i instal·lació
The DUTRIEUX Solar Wall Light is designed for self-contained installation, requiring no complex wiring. Follow these steps for optimal performance:
- Trieu una ubicació: Select a location that receives direct sunlight for at least 6-8 hours a day to ensure the solar panel can fully charge the battery. Avoid areas under eaves, trees, or other obstructions that might block sunlight.
- Alçada de muntatge: For effective motion detection, an ideal mounting height is approximately 6.5 to 7 feet (2 to 2.1 meters) from the ground. The motion sensor has a sensing distance of 26-36 feet (8-11 meters) and a 120-degree angle.
- Instal·lació: Use appropriate screws and anchors (not included) to securely mount the light to a wall or desired surface. Ensure the solar panel faces upwards to maximize sun exposure.
- Càrrec inicial: Before first use, allow the solar light to charge in direct sunlight for a full day (6-8 hours) to ensure the battery is adequately charged.
Sensing angle and distance for optimal mounting.
Examples of suitable installation locations.
Instruccions de funcionament
The solar wall light features intelligent light control, automatically charging during the day and activating at night. It offers three distinct operating modes:
- Mode 1 (Human Body Induction Mode): When motion is detected, the light turns on at full brightness. When no motion is detected, the light turns off completely after a short delay.
- Mode 2 (Human Body Induction + Slight Light Mode): When motion is detected, the light turns on at full brightness. When no motion is detected, the light dims to a weak light mode.
- Mode 3 (Constant Light Mode): The light stays on at a dim level throughout the night, regardless of motion detection.
To switch between modes, press the power button located on the front of the unit. Each press cycles to the next mode.
Visual representation of the three operating modes.
Demonstration of the light's functionality and water resistance.
Manteniment
To ensure the longevity and optimal performance of your solar wall light, consider the following maintenance tips:
- Netegeu el panell solar: Netegeu regularment el panell solar amb un drap suau iamp cloth to remove dust, dirt, and debris. A clean panel ensures maximum sunlight absorption and efficient charging.
- Cura de la bateria: The integrated 18650 lithium battery is designed for durability. Avoid prolonged storage in a completely discharged state. If storing the light for an extended period, ensure it is fully charged beforehand.
- Inspeccionar per danys: Periodically check the light for any physical damage, especially after severe weather conditions.
Keep the solar panel clean for high energy transfer efficiency.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s'encén a la nit. | Insufficient charging; solar panel is dirty or obstructed; light is in 'off' mode. | Ensure the solar panel receives 6-8 hours of direct sunlight. Clean the solar panel. Press the power button to cycle through modes. |
| La llum és tènue o només roman encesa durant poc temps. | Insufficient charging; battery capacity reduced due to cold weather or age. | Relocate the light to an area with more direct sunlight. Ensure the solar panel is clean. Allow for a full day's charge. |
| El sensor de moviment no detecta moviment. | Incorrect mounting height; sensor obstructed; light is in 'constant light' mode. | Adjust mounting height to 6.5-7 feet. Clear any obstructions in front of the sensor. Switch to Mode 1 or Mode 2. |
Especificacions
| Característica | Detall |
|---|---|
| Panell solar | 5.5V 1.43W Monocrystalline Silicon |
| Bateria | 3.7V 800mAh 18650 Lithium Battery |
| Quantitat de LED | 100 LED |
| Flux lluminós | Up to 1000lm (600 lumens for super brightness mode) |
| Wattage | 20W |
| Temps de càrrega | 6-8 hores (raig solar directa) |
| Horari de treball | 6-10 hores (segons el mode i la càrrega) |
| Material | PC + ABS |
| Mida del producte | 13 cm x 9.5 cm x 5 cm (aprox. 5.1 x 3.7 x 2 polzades) |
| Pes net | 122 g |
| Classificació impermeable | IP65 (Water repellent, rain-proof, lightning protection, frost and heat resistant) |
| Vida útil | Més de 30,000 hores |
Key features and energy efficiency.
Durability features: IP65 waterproof and long lifespan.
Consells per a l'usuari
- For best performance, ensure the solar panel is free from snow, leaves, or other debris, especially during winter months or after storms.
- If the light is not performing as expected, try repositioning it to an area with more direct and prolonged sunlight exposure.
- The motion sensor is most effective when mounted at the recommended height and with a clear line of sight to the area you wish to illuminate.
Garantia i Suport
For specific warranty information, technical support, or any product-related inquiries, please contact the seller or refer to the product packaging. Keep your purchase receipt as proof of purchase.
