1. Introducció
The Scimagic-RC Zigbee Smart Switch Module is a versatile inching/self-lock smart switch compatible with various hubs like SONOFF Bridge, Amazon Hub, Samsung SmartThings Hub, Philips Hue Hub, and Tuya Smart Bridge. It uses Zigbee 3.0 protocol for quick pairing and features a fire-proof and flame-retardant shell for safety. AES-128 encryption ensures data privacy. This module can also act as a Zigbee router to stabilize connections in multi-device smart home setups.
2. Especificacions
| Paràmetre | Valor |
|---|---|
| Entrada Voltage | DC/AC 7V~32V, AC 85-250V |
| Màx. Actual | 2200W/10A |
| Estàndard sense fils | Zigbee |
| Temperatura de treball | -20 ℃ ~ 70 ℃ |
| Mida | 69 * 41 * 20 mm |
| Mètode de comunicació | Zigbee |
| Estat de l'Assemblea | A punt per anar |
| Compatibilitat | All Compatible (Alexa, Google Home, Smart Life, Tuya) |
| Certificació | CE |
| Tipus de producte | ZigBee + RF Switch Module |
| Funcions | Inching switch, Self-locking switch |
3. Instruccions de configuració
3.1. Requisits previs
- A Zigbee gateway is required for smart functionality.
- Ensure the smart switch module is within close proximity to the Zigbee gateway during the pairing process for optimal connection.
3.2. Esquemes de cablejat
Proper wiring is essential for safe and correct operation. Refer to the diagrams below for your specific input voltage.
3.3. App Setup and Device Pairing
This section details how to add your smart switch module to the mobile application (e.g., Ewelink or Tuya Smart Life).
- After installation, power on the device and confirm that the device's network indicator is flashing. If the device network indicator is not flashing, you can press and hold any manual switch for 8 seconds to reset the device.
- Open your Ewelink or Tuya Smart Life app.
- Navigate to the Zigbee gateway card (if applicable) and click "Add subdevice" or "Add Device".
- Wait for approximately 1 minute until the device is found.
- Once found, click "Done" or "Next" to complete the pairing.
- After successful addition, return to the main interface of the app. You should see the newly added device.
- When the device's network indicator light is on, remote control can be performed via the app.
4. Instruccions de funcionament
4.1. App Functionality
The mobile application provides comprehensive control over your smart switch module.
- Control ON/OFF: Easily toggle the connected device on or off from anywhere.
- Gestió de dispositius: Rename devices, view operation logs, or delete devices from your app.
- Funcions de temporització: Set schedules, countdowns, or loop timers to automate your devices.
4.2. Control per veu
Integrate your smart switch module with voice assistants for hands-free control.
- Amazon Alexa: "Alexa, turn on the lights."
- Assistent de Google: "Ei Google, apaga el ventilador."
5. Remote Control (433MHz)
The module supports a 433MHz remote control for additional convenience.
- Vol. Operatiutage: DC3V (requires 2pcs CR2016 batteries, not included)
- Freqüència de transmissió: 433 MHz
- Tipus de codificació: Codi d'aprenentatge
- Distància de transmissió: 10-100M (in open field conditions)
6. Consells d'usuari
- Compatibilitat: This smart switch module is compatible with the Ewelink app and Sonoff Bridge Pro, in addition to other listed hubs.
- Rang de senyal: For optimal performance, especially in homes with multiple Zigbee devices, consider using the module as a Zigbee router to extend and stabilize your network signal.
7. Solució De Problemes
- Device not found during pairing: Ensure the device is powered on and its network indicator is flashing. If the indicator is not flashing, press and hold any manual switch on the module for 8 seconds to reset it to pairing mode.
- El comandament a distància no respon: Check if the device's network indicator light is on. Verify that the 433MHz remote control batteries (2x CR2016) are correctly installed and not depleted. Replace batteries if necessary.
- Connexió intermitent: Ensure your Zigbee gateway is centrally located and not obstructed. The module can act as a Zigbee router to strengthen the network.
8. Manteniment
- Mantingueu el dispositiu net i sec. Feu servir un drap suau i sec per netejar-lo.
- Eviteu exposar el dispositiu a temperatures extremes, llum solar directa o humitat elevada.
- Do not attempt to open or repair the device yourself, as this may void the warranty and pose a safety risk. Contact customer support for any issues.
9. Garantia i Suport
This product comes with a 1-year warranty from the store. For any inquiries or support needs, please contact customer service. All emails will be answered within 24 hours.
For a detailed user manual in PDF format, you can refer to the official document: Manual d'usuari (PDF)
