Yottamaster PS500C3 RAID Hard Drive Enclosure User Manual

Introducció

The Yottamaster PS500C3 is a high-performance RAID hard drive enclosure designed to provide reliable and flexible storage solutions for 2.5-inch and 3.5-inch SATA HDDs and SSDs. With support for up to 80TB total capacity (16TB per single disk) and USB 3.1 5Gbps Type-C connectivity, it offers fast data transfer and robust data protection through various RAID modes. This manual provides detailed instructions for setup, operation, and maintenance of your enclosure.

Contingut del paquet

Si us plau, comproveu el contingut del paquet en desembalar-lo per assegurar-vos que hi hagi tots els components:

1. Product (Yottamaster PS500C3 Enclosure) x 1
2. Cable d'alimentació x 1
3. Power adapter (EU/US/AU/UK Plug, depending on region) x 1
4. USB Type-A to USB Type-C Cable (100CM) x 1
5. Tornavís x 1
6. Spare screws x 1 set
7. Manual d'instruccions x 1
8. Caixa d'embalatge x 1

Guia de configuració

1. Hard Drive Installation (Tool-less Design)

The Yottamaster PS500C3 enclosure features a tool-less design for easy installation of 2.5-inch and 3.5-inch SATA HDDs/SSDs. For 2.5-inch drives, screws are provided for secure fastening.

1. Obriu el recinte: Press the spring door on the front panel and remove the hard disk carrier(s).



2. Inseriu el disc dur: Place your 2.5-inch or 3.5-inch SATA HDD/SSD into the bracket. For 2.5-inch hard disks, use the provided screws to fix them securely.
3. Reinsert Carrier: Put the bracket with the hard disk back into the hard disk cabinet and gently push it in until it clicks into place.



4. Tancament tancat: Close the enclosure door. The installation is now complete.

2. Connecting to Power and Host Device

Connect the enclosure to a power source and your computer using the provided cables.

1. Connexió d'alimentació: Connect the power adapter to the DC IN port on the rear of the enclosure, then plug it into a wall outlet.
2. Connexió de dades: Connect the USB Type-A to USB Type-C cable from the enclosure's USB 3.1 Type-C port to an available USB port on your computer (Windows, Mac, or Linux).



3. Encès: Press the power button on the rear of the enclosure to turn it on.

3. Configuració del mode RAID

The Yottamaster PS500C3 supports multiple RAID modes. Important: Setting or changing the RAID mode will clear the contents of the hard disk. Please back up important data before using the old hard disk.

The RAID mode is configured using DIP switches located on the rear panel. Refer to the diagram below for specific switch settings for each RAID mode.

• RAID 0 (Fast Speed): Switches 1, 2, 3, 4: DOWN – DOWN – DOWN – UP
• RAID 1/10: Switches 1, 2, 3, 4: DOWN – UP – DOWN – UP
• RAID 3: Switches 1, 2, 3, 4: DOWN – UP – UP – UP
• RAID 5 (Comprehensive): Switches 1, 2, 3, 4: UP – DOWN – UP – UP
• Span (Big) / JBOD: Switches 1, 2, 3, 4: DOWN – UP – DOWN – UP
• Normal / Clear (PM Mode): Switches 1, 2, 3, 4: UP – UP – UP – UP

After setting the DIP switches, press the 'SET' button to apply the changes. Power cycle the device if necessary.

Instruccions de funcionament

1. Encendre/apagar

To power on the enclosure, press the power button on the rear panel. The LED indicator on the front will illuminate. To power off, press and hold the power button until the device shuts down.

2. Transferència de dades

Once connected and powered on, your computer should recognize the enclosure as an external storage device. You can then drag and drop files to and from the enclosure. The USB 3.1 Gen 1 interface supports transfer speeds of up to 5Gbps, allowing for fast and efficient data movement.

3. RAID Mode Functionality

Understanding the different RAID modes is crucial for optimizing your storage. Here's a brief overview:

• RAID 0 (Fast Speed): Requires at least two disks. Combines disks into one logical unit, doubling the theoretical speed of a single disk. No data redundancy.
• RAID 1 (High Security): Requires two disks. Mirrors data across both disks, providing high data redundancy. Capacity is limited to the size of one disk.
• RAID 3 (Fast and Safe Reading): Requires at least 3 disks. Uses one disk for error correction data. If one disk is damaged, data can be recovered. Requires disks of the same capacity.
• RAID 5 (Comprehensive): Requires 3-5 disks. Combines RAID 0 (speed) and RAID 1 (security) features. Offers good read-write ability and security.
• RAID 10 (RAID 0 + RAID 1 Combination): Requires 4-5 disks. Combines the high speed of RAID 0 with the security of RAID 1.
• Clonar: Creates an exact copy of one disk onto another.
• JBOD (SPAN) (Large Capacity): Combines multiple disks into a single large logical volume. Data is written sequentially across disks. If one disk fails, all data on the JBOD volume may be lost.
• PM (Normal) Mode (Single Disk Reading): Each hard disk is read independently, similar to mobile hard disks. Other hard disks are not affected if one fails.

Always ensure you understand the implications of each RAID mode on data redundancy and performance before configuration.

4. Sleep Energy Saving

The enclosure is designed with a sleep energy-saving feature. If there is no read-write activity for 10 minutes, the device will automatically enter a sleep state. This prevents the hard disk from invalid reading and writing for prolonged periods, reduces noise, and conserves power.

Manteniment

1. Sistema de refrigeració

The Yottamaster PS500C3 features an 80mm silent fan and a convective heat dissipation design to ensure optimal operating temperatures for your hard drives. This aluminum alloy body aids in effective heat dissipation.

To maintain efficient cooling, ensure the fan vents on the rear of the enclosure are not obstructed. Regularly clean any dust accumulation from the vents using compressed air.

2. Característiques de seguretat

The enclosure is equipped with multiple safeguards to protect your data and the device itself:

• Protecció contra sobreintensitat: Evita els danys causats per un corrent elèctric excessiu.
• Protecció contra el sobreescalfament: Monitors internal temperature and takes action to prevent overheating.
• Voltage Protecció: Mesures de salvaguarda contra el voltage fluctuacions.
• Protecció contra curtcircuits: Protegeix contra curtcircuits elèctrics.

Always use the provided power adapter to ensure proper voltage i subministrament actual.

Resolució de problemes

• Dispositiu no reconegut:
  • Ensure all cables (power and USB) are securely connected.
  • Proveu de connectar-vos a un altre port USB de l'ordinador.
  • Verify the enclosure is powered on (LED indicator should be lit).
  • Check if the hard drives are properly installed in their bays.
  • Per a les unitats noves, assegureu-vos que estiguin inicialitzades i formatades a l'Administració de discos (Windows) o a la Utilitat de discos (macOS) del vostre sistema operatiu.
• Velocitats de transferència lentes:
  • Ensure you are using a USB 3.0/3.1 compatible port and cable.
  • Comproveu l'estat dels vostres discs durs.
  • Consider the RAID mode configuration; some modes prioritize redundancy over speed.
• RAID mode not applying:
  • Double-check the DIP switch settings against the manual's diagram.
  • Ensure you press the 'SET' button after changing DIP switches.
  • Power cycle the enclosure after applying new RAID settings.
  • Remember that changing RAID modes will erase data; ensure you have backups.
• Enclosure overheating:
  • Ensure the rear fan vents are clear of obstructions.
  • Operate the enclosure in a well-ventilated area.
  • Clean dust from the fan and vents regularly.

Especificacions

The Yottamaster PS500C3 is part of the Y-Pioneer Series. Below are the detailed specifications:

Garantia i Suport

Yottamaster products are designed for reliability and performance. For warranty information and technical support, please refer to the official Yottamaster weblloc web o contacteu directament amb el servei d'atenció al client. Conserveu el rebut de compra per a reclamacions de garantia.

Consells per a l'usuari

• Empty Enclosure: This product is a hard drive enclosure only. It does not come with hard drives. You will need to purchase 2.5-inch or 3.5-inch SATA HDDs/SSDs separately to use with this device.
• Còpia de seguretat de dades: Always back up important data before changing RAID modes, as this process will erase all data on the installed hard drives.
• Compatibilitat amb la unitat: Ensure your hard drives are SATA compatible. The enclosure supports both 2.5-inch and 3.5-inch drives.