1. Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your Yottamaster M.2 SSD Enclosure. This device is designed to convert an M.2 NVMe or SATA SSD into a portable external storage solution, offering high-speed data transfer capabilities.
Figure 1: Yottamaster M.2 SSD Enclosure supporting both NVMe and SATA SSDs.
2. Informació de seguretat
- No exposeu el dispositiu a l'aigua ni a una humitat excessiva.
- Eviteu temperatures extremes.
- Do not attempt to disassemble or modify the enclosure, as this may void the warranty and cause damage.
- Mantenir fora de l'abast dels nens.
- Handle SSDs with care to prevent electrostatic discharge.
3. Contingut del paquet
Si us plau, comproveu el contingut del paquet en rebre'l:
- Yottamaster M.2 SSD Enclosure
- 2-in-1 Data Cable (USB-A to USB-C and USB-C to USB-C)
- Coixinet tèrmic
- Manual d'usuari (aquest document)
Figure 2: Product packaging and included items.
4. Especificacions
| Característica | Descripció |
|---|---|
| Nom de marca | YOTTAMASTER |
| Número de model | YTPWM2 |
| Interfície externa | USB |
| Material de la caixa | ABS+Aluminium Alloy |
| Capacitat de disc dur compatible | Fins a 4 TB |
| Emmagatzematge SSD | Fins a 4 TB |
| Mida | 1.8" (124*35*14MM) |
| Specification Compatibility | 2230, 2242, 2260, 2280 M.2 SSDs |
| Interfície d'entrada | M-Key/B&M-Key |
| Interfície de sortida | USB-C |
| Velocitat de lectura/escriptura | SATA 5Gbps / NVMe 10Gbps |
| Mode d'instal·lació | Sense eines |
| Sistema suportat | Windows / Mac OS / Linux |
Figura 3: Paràmetres detallats del producte.
5. Configuració i instal·lació
Segueix aquests passos per instal·lar el teu SSD M.2 a la carcassa:
- Obriu el recinte: Slide the button cover to the left and gently pull the shell out to open the enclosure.
- Aplicar coixinet tèrmic: Stick the thermal pad and the thermal fin onto your M.2 SSD. This aids in heat dissipation.
- Inseriu SSD: Stick the thermal pad to the SSD and carefully insert the SSD into the enclosure's slot. Ensure it is seated correctly.
- Tanca el recinte: Place the shell back and slide the button cover to the right until it clicks into place, securing the SSD.
Figure 4: Tool-free SSD installation steps.
Compatibilitat SSD
The enclosure supports both NVMe (M-Key) and SATA (B&M-Key) M.2 SSDs. It is compatible with M.2 SSDs of sizes 2230, 2242, 2260, and 2280.
Figure 5: Dual protocol interface support for M-Key NVMe/PCIe and B&M-Key NGFF/SATA SSDs.
Figure 6: Supported M.2 SSD specifications.
6. Instruccions de funcionament
Once the SSD is securely installed in the enclosure:
- Connect the enclosure to your computer using the provided 2-in-1 USB-C cable. Use either the USB-A to USB-C or USB-C to USB-C connection depending on your computer's ports.
- The enclosure will be recognized as an external storage device by your operating system (Windows, Mac OS, Linux).
- For new, unused SSDs, you may need to initialize and partition the drive through your operating system's disk management utility before it can be recognized and used.
- Ara pots transferir files cap i des de l'SSD.
Data Transfer Speeds
- When using an NVMe SSD, the transmission rate is up to 10Gbps, with read and write speeds reaching approximately 1000MB/s.
- When using an M.2 SATA SSD, the transmission rate is up to 5Gbps, with read and write speeds reaching approximately 450MB/s.
The enclosure supports UASP (USB Attached SCSI Protocol) and TRIM commands for optimized performance and SSD longevity.
Figure 7: High-speed data transfer capabilities.
Figure 8: The versatile 2-in-1 data cable.
7. Manteniment
- Neteja: Use a soft, dry cloth to clean the exterior of the enclosure. Do not use liquid cleaners.
- Dissipació de calor: The enclosure features a rapid cooling aluminum alloy shell, a combined heat dissipation module, and a silicone thermal pad to maintain stable operating temperatures.
- Emmagatzematge: Store the enclosure in a cool, dry place when not in use.
Figure 9: Heat dissipation design for stable performance.
8. Solució De Problemes
- SSD no reconegut: If a new SSD is not recognized, ensure it has been initialized and partitioned in your operating system's disk management utility.
- Velocitats de transferència lentes: Verify that your computer's USB port supports USB 3.1 Gen2 (10Gbps) for NVMe SSDs or USB 3.0 (5Gbps) for SATA SSDs. Older USB 2.0 ports will result in significantly slower speeds. Ensure the cable is properly connected.
- Enclosure Heats Up: It is normal for the aluminum case to heat up during use, especially during prolonged data transfers. This is due to the efficient heat dissipation design transferring heat away from the SSD. It does not affect normal operation.
- Problemes de connexió: Try using a different USB port or cable to rule out faulty components.
9. Consells d'usuari
- New SSD Partitioning: Always remember to initialize and partition a brand new SSD before first use, otherwise, it will not appear in your file explorador.
- Temperatura de funcionament normal: The enclosure is designed to dissipate heat effectively. It is normal for the aluminum casing to become warm to the touch during operation, especially under heavy load. This indicates the cooling system is working as intended.
- Àmplia compatibilitat: This enclosure is compatible with various brands of NVMe and SATA M.2 SSDs, not limited to specific manufacturers.
10. Garantia i Suport
For warranty information or technical support, please refer to the seller's policies or contact Yottamaster customer service directly. Keep your proof of purchase for any warranty claims.
