Introducció
This manual provides instructions for the installation and maintenance of Kemei KM-2026 and KM-2028 electric shaver replacement blades and foil. These replacement parts are also compatible with Andis Shaver models 17170 and 17205. Proper installation and care will ensure optimal performance and longevity of your shaver.
Configuració i instal·lació
Before installing new blades and foil, ensure your shaver is turned off and unplugged. Handle the blades and foil carefully to avoid injury or damage.
Alineació de la fulla
Your shears are carefully inspected to ensure that the blades are oiled and aligned before they leave our factory. If the blades are removed for cleaning or replacement, they must be re-aligned. Simply match the top and bottom blade teeth point to point upwards. The ends of the top blade teeth should be approximately 0.5-1.0mm back from the bottom blade. Compare your scissor blades with the sketch. If the blades are not aligned correctly, put a few drops of oil on the blades, turn the shears open for a while, close and unplug them. Loosen the screw slightly and make adjustments until the blades are aligned, then tighten the screw.
Note on Versions:
- El old version replacement parts are designed for older models of KM-2026 and KM-2028.
- El new version replacement parts are designed for newer KM-2026 models, KM-TX1, and KM-TX3.
Operating with New Blades/Foil
Once the new blades and foil are correctly installed and aligned, your shaver is ready for use. Operate your shaver according to its original instruction manual. The new blades and foil are designed to restore optimal cutting performance.
Manteniment
Manteniment del tallador
To keep your shears in top condition, the blades should be oiled every few haircuts. To oil it properly, the unit blades should be kept in the downward position. Run the shears with the blades through the top blade.
Regular cleaning of the blades and foil is recommended to prevent hair buildup and maintain hygiene. Refer to your shaver's original manual for detailed cleaning instructions.
Resolució de problemes
If you experience issues after replacing the blades and foil, consider the following:
- Rendiment de tall baix: Ensure the blades are correctly aligned as described in the 'Blade Alignment' section. Incorrect alignment is a common cause of poor cutting.
- Soroll o vibració: Check that all components are securely fastened and properly seated. Re-oiling the blades might also help reduce friction and noise.
- Irritació: Ensure the foil is not damaged or bent. A damaged foil can cause skin irritation.
Especificacions
| Atribut | Detall |
|---|---|
| Tipus de producte | Electric Shavers Replacement Blades & Foil |
| Nom de marca | Kemei |
| Números de model | KM-2026, KM-2028 |
| Compatibilitat | Andis Shaver 17170/17205 |
| Versions disponibles | Old Version (for old KM-2026, KM-2028), New Version (for new KM-2026, KM-TX1, KM-TX3) |
| Origen | Xina continental |
| Certificació | CE |
| Longitud del paquet | 12 cm |
| Amplada del paquet | 7 cm |
| Alçada del paquet | 4 cm |
| Pes del paquet | 0.027 kg |
Garantia i Suport
Product Guarantees
The product is manufactured and inspected through strict quality control. If a fault occurs during correct use, the consumer is entitled to a free warranty service at the purchasing shop or our repair center in accordance with the warranty card. Please note that batteries and blades are consumables and are not included in the warranty and are subject to payment.
Exclusions from Free Service
Free service will not be provided in the following cases:
- Damage caused by unapproved repairs or alterations.
- Damage caused by incorrect or negligent use or accident.
- Damage caused by natural disasters or voltage anomalies.
- Damage due to neglect of product specifications.
For further detailed information, you may refer to the official user manual in PDF format: Manual d'usuari (PDF).
Consells per a l'usuari
- Verificar la compatibilitat: Always double-check if you are purchasing the 'old version' or 'new version' blades/foil to ensure it matches your specific Kemei shaver model (KM-2026, KM-2028, KM-TX1, KM-TX3) or Andis shaver (17170/17205).
- Lubricació regular: Apply a few drops of shaver oil to the blades after every few haircuts to maintain smooth operation and extend blade life.
- Manipulació suau: The foil screen is delicate. Avoid pressing too hard on your skin or dropping the shaver, as this can damage the foil and affect performance.
- Netejar regularment: Disassemble and clean the blades and foil regularly to remove hair clippings and debris, which can impact cutting efficiency and hygiene.
