1. Introducció
This Hobbywing LED Program Card is designed for easy and quick programming of various HobbyWing brushless Electronic Speed Controllers (ESCs). Its compact and portable design makes it ideal for field use. This manual provides detailed instructions for its setup, operation, and maintenance.
2. Especificacions del producte
| Característica | Especificació |
|---|---|
| Dimensions (L x A x A) | 88 x 58 x 14 mm |
| Pes | 40 g |
| Entrada Voltage | 4.8V - 8.4V |
| Material | Niló |
| Font d'alimentació | External (via ESC's BEC or separate battery) |
| Bateria interna | Cap |
3. Compatibilitat
The Hobbywing LED Program Card is compatible with the following HobbyWing brushless ESC series:
- Aircraft ESCs: Platinum V1/V2 series, FlyFun V5 series.
- Car ESCs: XeRun series (refer to specific user manuals for details), EzRun series, QuicRun series (including QuicRun WP 880, QuicRun WP Crawler).
- Boat ESCs: SeaKing series.
Nota: Always consult the user manual of your specific ESC model for definitive compatibility and programming instructions.
4. Configuració i connexió
To set up and connect your LED Program Card:
- Ensure your ESC is disconnected from the main battery.
- Connect the included connecting line to the program card's designated port (usually marked "ESC" or similar).
- Connect the other end of the connecting line to the programming port or throttle channel of your ESC.
- If your ESC does not have a built-in or external BEC (Battery Eliminator Circuit) to power the program card, you will need a separate battery (4.8V-8.4V) to power the program card. Connect this battery to the appropriate power input port on the program card if available, or ensure the ESC's BEC is active.
- Once connected, the program card's LED display should light up, indicating it's ready for use.
5. Instruccions de funcionament
The LED Program Card features an intuitive interface with "ITEM", "VALUE", "RESET", and "OK" buttons, along with two LED displays for item number and value. The card also includes printed tables (TABLE1, TABLE2, TABLE3, TABLE4) on its surface, which list the programmable parameters and their corresponding values for different ESC series.
5.1. Funcionament bàsic
- Encès: Connect the program card to the ESC as described in the Setup section. The LED displays will light up.
- Select Item: Press the "ITEM" button to cycle through the programmable parameters. The left LED display will show the item number.
- Select Value: Once an item is selected, press the "VALUE" button to cycle through the available settings for that item. The right LED display will show the corresponding value.
- Confirmeu la configuració: After selecting the desired value for an item, press the "OK" button to save the setting to the ESC.
- Restableix al valor predeterminat: To reset all parameters to their factory default settings, press the "RESET" button.
5.2. Parameter Tables
Refer to the tables printed on the program card for specific parameters and their options. Ensure you are using the correct table for your ESC model.
TABLE1: For WP-S16/10BL50/10BL60-RTR
| Item | Opcions |
|---|---|
| 1. Mode d’execució | (1) Forward with Brake, (2) Forward/Reverse with Brake |
| 2. Força de fre d'arrossegament | (1) 0%, (2) 5%, (3) 10%, (4) 15% |
| 3. Volum baixtage Llindar de tall | (1) Non-Protection, (2) 2.6V/Cell, (3) 2.8V/Cell, (4) 3.0V/Cell, (5) 3.2V/Cell, (6) 3.4V/Cell |
| 4. Mode d'inici (perforació) | (1) Level 1 (Soft), (2) Level 2, (3) Level 3, (4) Level 4 (Very Aggressive) |
| 5. Maximum Brake Force | (1) 25%, (2) 50%, (3) 75%, (4) 100% |
TABLE2: For WP-SC8
| Item | Opcions |
|---|---|
| 1. Mode d’execució | (1) Forward with Brake, (2) Forward/Reverse with Brake, (3) Forward and Reverse |
| 2. Força de fre d'arrossegament | (1) 0%, (2) 5%, (3) 10%, (4) 15%, (5) 20%, (6) 25%, (7) 30%, (8) 40%, (9) 50%, (10) 60%, (11) 70%, (12) 80%, (13) 90%, (14) 100% |
| 3. Volum baixtage Llindar de tall | (1) Non-Protection, (2) 2.6V/Cell, (3) 2.8V/Cell, (4) 3.0V/Cell, (5) 3.2V/Cell, (6) 3.4V/Cell |
| 4. Mode d'inici (perforació) | (1) Level 1, (2) Level 2, (3) Level 3, (4) Level 4, (5) Level 5, (6) Level 6, (7) Level 7, (8) Level 8, (9) Level 9 |
| 5. Maximum Brake Force | (1) 25%, (2) 50%, (3) 75%, (4) 100%, (5) Disable |
TABLE3: For WP-MAX10/8-RTR
| Item | Opcions |
|---|---|
| 1. Mode d’execució | (1) Fwd/Brake, (2) Fwd/Rev/Brake |
| 2. Cèl·lules Lipo | (1) Auto Calculation, (2) 2S, (3) 3S, (4) 4S |
| 3. Volum baixtage Tall | (1) Disabled, (2) Auto(Low), (3) Auto(Intermediate), (4) Auto(High) |
| 4. Protecció tèrmica ESC | (1) 105°C/221°F, (2) 125°C/257°F |
| 5. Protecció tèrmica del motor | (1) Disabled, (2) Enabled |
| 6. Rotació del motor | (1) CCW, (2) CW |
| 7. BEC Voltage | (1) 6.0V, (2) 7.4V |
| 8. Màx. Força de frenada | (1) 12.50%, (2) 25.00%, (3) 37.50%, (4) 50.00%, (5) 62.50%, (6) 75.00%, (7) 87.50%, (8) 100.00%, (9) Disabled |
| 9. Màx. Força inversa | (1) 25.00%, (2) 50.00% |
| 10. Mode d'inici (perforació) | (1) Level 1, (2) Level 2, (3) Level 3, (4) Level 4, (5) Level 5 |
| 11. Arrossegueu el fre | (1) 0%, (2) 2%, (3) 4%, (4) 6%, (5) 8%, (6) 10%, (7) 12%, (8) 14%, (9) 16% |
TABLE4: For QuicRun 860/880
| Item | Opcions |
|---|---|
| 1. Mode d’execució | (1) Fwd/Brake, (2) Fwd/Rev/Brk |
| 2. Tipus de bateria | (1) Lipo, (2) NiMH |
| 3. Volum de talltage | (1) Disabled, (2) Auto(Low), (3) Auto(Intermediate), (4) Auto(High) |
| 4. Força d'inici inicial | (1) 0%, (2) 2%, (3) 4%, (4) 6% |
| 5. Màx. Força endavant | (1) 25%, (2) 50%, (3) 75%, (4) 100% |
| 6. Màx. Força inversa | (1) 25%, (2) 50%, (3) 75%, (4) 100% |
| 7. Màx. Força de frenada | (1) 12.50%, (2) 25.00%, (3) 37.50%, (4) 50.00%, (5) 62.50%, (6) 75.00%, (7) 87.50%, (8) 100.00% |
| 8. Força de fre inicial | (1) 0%, (2) 6.25%, (3) 12.50%, (4) 18.75%, (5) 25.00%, (6) 31.25%, (7) 37.50%, (8) 43.75%, (9) 50.00% |
| 9. Arrossegueu el fre | (1) 0%, (2) 5%, (3) 10%, (4) 20%, (5) 30%, (6) 40%, (7) 50%, (8) 60%, (9) 70%, (10) 80%, (11) 90%, (12) 100% |
| 10. Velocitat de fre d'arrossegament | (1) Level 1, (2) Level 2, (3) Level 3, (4) Level 4, (5) Level 5, (6) Level 6, (7) Level 7, (8) Level 8, (9) Level 9 |
| 11. Interval neutre | (1) 0.04ms, (2) 0.06ms, (3) 0.08ms, (4) 0.10ms, (5) 0.12ms |
| 12. Mode d'inici/Punch | (1) Level 1, (2) Level 2, (3) Level 3, (4) Level 4, (5) Level 5, (6) Level 6, (7) Level 7, (8) Level 8, (9) Level 9 |
| 13. PWM Mode/Punch | (1) 8K, (2) 16K, (3) 4K |
| 14. BEC Voltage | (1) 6.0V, (2) 7.4V |
| 15. Roda lliure | (1) Enabled, (2) Disabled |
6. Manteniment
- Keep the program card clean and free from dust and moisture.
- Eviteu exposar el dispositiu a temperatures extremes o a la llum solar directa.
- Do not attempt to disassemble the unit, as this will void any potential warranty.
- Store the program card and connecting cable in a safe place when not in use to prevent damage.
7. Solució De Problemes
- Program Card Not Powering On:
- Ensure the connecting cable is securely attached to both the program card and the ESC.
- Verify that the ESC's BEC is active and providing power, or connect a separate 4.8V-8.4V battery to the program card if required by your ESC model.
- Check for any visible damage to the cable or ports.
- Configuració no desada:
- Make sure you press the "OK" button after selecting each parameter value.
- Confirm that your ESC model is compatible with the program card and that you are using the correct parameter table.
- Incorrect Parameter Values Displayed:
- Double-check that you are referring to the correct parameter table (TABLE1, TABLE2, TABLE3, or TABLE4) for your specific ESC model.
8. Consells d'usuari
- Always Refer to ESC Manual: While this program card simplifies programming, always cross-reference with your specific ESC's user manual for the most accurate and detailed programming instructions and compatibility information. For example, if you have a "Platinum V4" ESC, ensure it is explicitly listed as compatible or that its parameters match one of the tables provided.
- One Setting at a Time: For best results, change one parameter at a time and test the ESC's behavior before making further adjustments.
- Keep a Record: It's good practice to note down your custom ESC settings, especially if you frequently experiment with different configurations.
9. Garantia i Suport
For warranty information, technical support, or service inquiries, please contact the manufacturer or your authorized dealer. Keep your proof of purchase for any warranty claims.
