BURGIM 9-inch Universal Car Radio Fascias and Wiring Harness Instruction Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your BURGIM 9-inch Universal Car Radio Fascias and 16PIN Wiring Harness. This product is designed to seamlessly integrate a 9-inch Android large screen intelligent car multimedia navigation audio system into compatible vehicle models, replacing the original car radio audio system with ease.

Figura 1: Frontal view of the 9-inch universal car radio fascia frame.

2. Components del producte

• 9-inch Universal Car Radio Fascias Frame: Designed for a 1:1 fit with the original car radio installation part.
• 16PIN Wiring Harness Power Cable Connector: Used to meet the standard pin definition of car audio and navigation systems.
• CANbus Protocol Box (if included with harness): For vehicle-specific communication with the Android host.

Figure 2: Multiple angle views of the 9-inch car radio fascia frame.

Figura 3: Detallada view of the 16PIN wiring harness power cable connector.

3. Configuració i instal·lació

The installation process involves replacing your vehicle's original radio audio system with a 9-inch Android multimedia screen using the provided fascia frame and wiring harness. This kit is designed for a plug-and-play installation without cutting original wires.

3.1 Fascia Frame Installation

1. Carefully remove your vehicle's original radio unit and dashboard trim, following your vehicle's specific service manual.
2. Position the 9-inch Universal Car Radio Fascias Frame into the dashboard opening. Ensure it aligns perfectly with the original car radio installation part.
3. Secure the fascia frame using the appropriate mounting points and screws (not included, typically reused from original unit or supplied with the Android head unit).
4. Install your 9-inch Android multimedia screen into the new fascia frame.

Figure 4: Before and After installation of the Android multimedia screen with the fascia frame.

3.2 Wiring Harness Connection

The 16PIN wiring harness is designed for simple, plug-to-plug installation. It connects your new Android head unit to your vehicle's power and speaker systems.

1. Locate the corresponding 16PIN power interface on your Android head unit.
2. Connect the provided 16PIN wiring harness to the head unit's power interface.
3. Connect the other end of the wiring harness to your vehicle's factory wiring harness. Ensure all connections are secure.

Figure 5: 16PIN ISO Wiring Harness Pinout Diagram.

3.3 CANbus Protocol Box Setup (If Applicable)

If your wiring harness includes a CANbus protocol box, additional configuration on your Android head unit is required for proper communication with your vehicle's systems (e.g., steering wheel controls, vehicle information display).

1. Find the 8PIN CAN plug of the wiring harness and plug it into the 8PIN CAN Socket of the Stereo Head Unit Screen.
2. Power on your Android head unit.
3. Navigate to the head unit's Configuració menú.
4. Entra Configuració de fàbrica. You may be prompted for a password. If you do not know the factory password, please consult the vendor of your Android head unit.
5. Within Factory Settings, locate and enter Configuració CANBUS or Configuració del model.
6. Seleccioneu el correcte CANbus Brand according to the CANbus box you received.
7. Select your specific Model de cotxe.
8. Trieu el Specific Configuration or Year per al teu vehicle.
9. Desa the settings and Reinicieu the Android head unit.
10. It is recommended to update the head unit's MCU (Microcontroller Unit) to the latest version for optimal performance.

Figure 6: 8PIN CANbus Connection Diagram.

Figure 7: Visual guide for CANbus setup on Android stereo.

4. Instruccions de funcionament

The primary operation related to this product is the configuration of the CANbus system, as detailed in Section 3.3. Once configured, the fascia frame and wiring harness function passively to support your Android multimedia screen. All further operations will be performed directly on your Android head unit.

5. Manteniment

The fascia frame is made from durable, environment-friendly ABS plastic and requires minimal maintenance. The wiring harness components are tested for electrical performance and reliability.

• Neteja: Utilitzeu un suau, damp cloth to wipe down the fascia frame. Avoid abrasive cleaners or solvents that could damage the plastic finish.
• Inspecció: Periodically check the wiring connections to ensure they remain secure and free from corrosion.
• Condicions ambientals: Avoid exposing the product to extreme temperatures or direct sunlight for prolonged periods, as this may affect the material's integrity over time.

6. Solució De Problemes

Si teniu problemes després de la instal·lació, tingueu en compte els passos següents per resoldre'ls:

• Sense alimentació a la unitat principal:
  • Check all 16PIN wiring harness connections to ensure they are firmly seated.
  • Verify the vehicle's fuse box for any blown fuses related to the radio or accessory power.
• CANbus Functions Not Working (e.g., Steering Wheel Controls):
  • Revisit the CANbus setup steps in Section 3.3. Ensure the correct CANbus brand, car model, and configuration are selected in the Android head unit's factory settings.
  • Confirm the 8PIN CAN plug is correctly connected to the head unit.
  • If prompted for a factory password and you don't have it, contact the vendor of your Android head unit.
  • Consider updating the Android head unit's MCU to the latest version.
• Loose Fit of Fascia Frame:
  • Ensure all mounting clips and screws are properly engaged and tightened.
  • Verify that the fascia frame is the correct model for your specific vehicle and 9-inch head unit.

7. Especificacions

8. Consells d'usuari

• Verificar la compatibilitat: Before starting installation, double-check that both the fascia frame and wiring harness are compatible with your specific vehicle model and the 9-inch Android head unit you intend to install.
• Instal·lació professional recomanada: While designed for simple installation, working with vehicle electronics can be complex. If you are unsure about any step, consider seeking professional installation to avoid damage to your vehicle or the product.
• Prova abans del muntatge final: After connecting the wiring harness and before fully reassembling the dashboard, power on the Android head unit and test all functions (audio, CANbus features, etc.) to ensure everything is working correctly.
• Keep Factory Password Handy: For CANbus setup, the factory password for your Android head unit is crucial. Ensure you have it or know how to obtain it from your head unit's vendor.

9. Garantia i Suport

For any questions regarding the BURGIM 9-inch Universal Car Radio Fascias and Wiring Harness, including technical support, troubleshooting assistance, or warranty information, please contact the BURGIM Factory Store directly. When contacting support, please provide your product details and any relevant purchase information.