1. Introducció
The COMFAST CF-E319A V2 is a high-performance 900Mbps 5GHz Outdoor Wireless CPE designed for long-range wireless connectivity. It is ideal for Point-to-Point (PtP) and Point-to-Multi-Point (PtMP) solutions, suitable for private ISP wireless connectivity, CCTV surveillance, and data transmission over distances up to 11KM.
This device features a powerful 1000mW transmit power and a 26dBi directional dual-polarization antenna, ensuring stable and efficient long-distance signal transmission. Its robust IP65-rated design provides protection against various outdoor elements, making it suitable for rugged environments.
Vídeo: Acabatview of the COMFAST CF-E319A V2 Outdoor Wireless CPE, highlighting its features and long-distance transmission capabilities.
2. Contingut del paquet
Please check the package carefully to ensure all items are present and undamaged. The standard package includes:
- CF-E319A CPE Unit (1 or 2, depending on purchase)
- Base (1 or 2)
- Mounting Bracket (1 or 2)
- Stainless Steel Straps (for mounting, 1 or 2 sets)
- POE Adapter (1 or 2)
- Software Installation Guide (1 or 2)
- Hardware Installation Guide (1 or 2)
3. Especificacions
The COMFAST CF-E319A V2 boasts the following technical specifications:
| Característica | Descripció |
|---|---|
| Maquinari | Qualcomm chipset; RAM: 128MB; FLASH: 16MB; PA: SKY85743-21 |
| Antena | 26dBi Directional antenna (Butterfly Shape High Power Antenna) |
| Estàndard sense fils | IEEE802.11a/an/ac standard |
| Transmissió de potència | 1000 mW (30 dBm) |
| Acceptance Sensitivity | -96 dBm |
| Freqüència de treball | 802.11a/an: 5.180GHz-5.825GHz |
| Velocitat | 5.8 GHz: 900 Mbps |
| Interfície física | 1*10/100/1000Mbps LAN/WAN RJ45 Ethernet Port, 1*RESET Button |
| Indicador LED | 6 LED indicators: POE Adapter, Network Port, WiFi, Signal Strength (1-3) |
| Adaptador POE | 24V POE adapter |
| Consum d'energia | ≤12 W |
| Instal·lació | Pole-mounted, Wall-mounted, Bracket-mounted |
| Mida del producte | 400 * 280 * 234 mm |
| Mida del paquet | 324 * 108 * 70 mm |
| Pes net del producte | Uns 800 g |
| Temperatura de treball | -10 ℃ ~ 55 ℃ |
| Temperatura d'emmagatzematge | -50 ℃ ~ 75 ℃ |
| Humitat de treball | 10% ~ 90% HR sense condensació |
| Humitat d'emmagatzematge | 5% ~ 90% HR sense condensació |
| Nivell de protecció | 2KV Lightning Protection; IP65 Level |
4. Guia d'instal·lació
Follow these steps for easy installation of your COMFAST CF-E319A V2 CPE:
- Connect the Antenna Sets: Assemble the three antenna pieces together.
- Insert and Fix the Base: Insert the base onto the main antenna unit and secure it with two screws.
- Insert Shell and Cover: Place the shell and cover into the reflector.
- Screw the Bracket: Screw the bracket (nut + device) clockwise onto the base device.
- Connecteu el cable de xarxa: Pull out the back waterproof cover, insert the network cable into the port, and then push the cover back securely.
- Muntar el dispositiu: Open the stainless steel tie through the 4 slots on the bracket and fix the device onto a pole.
4.1. Ajust d'angle
The device features a built-in level design to help users quickly and accurately judge the installation angle. This ensures optimal signal alignment for maximum performance.
The innovative design of the installation clip allows the bridge to be rotated and adjusted at any angle, providing flexible application for various project requirements.
5. Funcionament
5.1. POE Power Supply Connection
The CF-E319A V2 supports Power over Ethernet (POE), allowing a single 100-meter long network cable to provide both power and data transmission. This simplifies outdoor installations by reducing the need for separate power outlets.
5.2. Indicadors LED
The device is equipped with LED indicators to provide real-time status information:
- Llum de potència: On when the device is connected and powered.
- Indicador WAN/LAN: Flashing indicates network transmission data.
- Indicador WiFi: Flashing indicates wireless data transmission.
- Signal Strength (1-3 lights): Three lights on indicate the strongest signal.
5.3. Wireless Bridge Connection Modes
The CF-E319A V2 supports various wireless bridge connection methods:
5.3.1. Point-to-Point Connection (Method 1)
This method is used for connecting multiple cameras to a monitoring center. Connect each camera to a POE switch, then connect the POE switch to one COMFAST bridge (set to Terminal mode). The other COMFAST bridge (set to AP transmit mode) connects to a DVR and monitor computer, transmitting data through the one-to-one bridge.
5.3.2. Multi-Point to Multi-Point Connection (Method 2)
For scenarios where cameras are far apart, configure a pair of bridges for each camera. The monitoring center uses a switch to connect the AP terminals together, which then connects to a hard disk video recorder.
5.3.3. Point-to-Multi-Point Connection (Method 3)
If the angle between the camera location and the monitoring center is less than 120 degrees, a point-to-multipoint setup can be used. This reduces the cost of the transmitter bridge, provided the prerequisites for angle and broadband requirements are met. In wireless monitoring transmission, it is recommended to use this illustrated method for point-to-point or point-to-multipoint transmission. The transmission angle of the wireless bridge is 120 degrees. Please adjust the angle of the device accordingly.
5.4. SSID Broadcast Hiding
The wireless bridge supports SSID broadcast hiding, which helps to prevent unauthorized access to your network and ensures project stability.
6. Manteniment
The COMFAST CF-E319A V2 is designed for outdoor use with an IP65 rating, providing excellent protection against various environmental factors. Regular maintenance can help ensure its longevity and optimal performance.
6.1. Protecció del Medi Ambient
The device features an IP65 protection level, offering:
- Protecció contra llamps
- Waterproof capabilities
- Antifreeze properties
- Disseny a prova de pols
- Resistència a altes temperatures
- Anti-oxidation properties
6.2. Neteja
Periodically inspect the device for any accumulation of dust or debris, especially on the antenna surface. Gently clean with a soft, dry cloth. Do not use liquid cleaners or solvents.
6.3. Actualitzacions de firmware
Comproveu el del fabricant website regularly for firmware updates. Keeping the firmware updated ensures optimal performance, security, and access to new features.
7. Solució De Problemes
If you encounter issues with your COMFAST CF-E319A V2, refer to the following common problems and solutions:
- Sense energia: Ensure the POE adapter is correctly connected and receiving power. Verify the network cable is securely plugged into both the CPE and the POE adapter.
- Sense senyal/Senyal feble:
- Check the alignment of the CPE units using the built-in level and LED signal indicators. Adjust the angle for optimal signal strength.
- Ensure there are no significant obstacles (trees, buildings, etc.) directly blocking the line of sight between the CPEs.
- Verify that the devices are configured correctly for Point-to-Point or Point-to-Multi-Point mode.
- Problemes de connectivitat de xarxa:
- Confirm that the network cables are properly connected to the LAN/WAN ports.
- Check the network settings on connected devices (e.g., computer, camera).
- If using a switch, ensure it is functioning correctly.
- Interferència: The CF-E319A V2 operates on the 5.8GHz band to minimize interference from common 2.4GHz devices. If interference persists, ensure proper channel selection in the device's software settings.
- El dispositiu no respon: If the device becomes unresponsive, press and hold the RESET button for a few seconds to restore factory default settings. (Note: This will erase all custom configurations).
8. Consells d'usuari
- For Point-to-Point Connections: For optimal performance and to achieve the advertised long-range transmission (e.g., 5-11KM), it is highly recommended to purchase two CPE units to establish a dedicated wireless bridge.
- Consciència d'obstacles: The effective transmission distance can be significantly affected by obstacles such as trees, walls, buildings, or even large vehicles. Always aim for a clear line of sight between CPE units.
- Potència externa: The device uses a POE adapter for power, eliminating the need for a separate external power source at the CPE unit itself, as long as the POE adapter is powered.
- Finalitat: This device is primarily for extending and bridging WiFi networks over long distances, not for boosting phone signals.
9. Garantia i Suport
For detailed warranty information and technical support, please refer to the official COMFAST weblloc web o poseu-vos en contacte amb el vostre distribuïdor local. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.
