EDUP WiFi Signal Booster Instruction Manual

Introducció

The EDUP WiFi Signal Booster is a high-power amplifier designed to significantly improve the link quality and coverage of your wireless LAN devices. It supports both 2.4GHz and 5.8GHz frequency bands, offering enhanced performance for various wireless applications. This manual provides essential information on the features, specifications, setup, operation, and maintenance of your EDUP WiFi Signal Booster.

Característiques clau

• Dual inputs and dual outputs for versatile connectivity.
• Wide operating input voltagrang de 5V a 16V.
• Plug and play functionality, requiring no software installation.
• Lightweight design, with the amplifier board weighing only 100g.
• Flexible power supply options: 12V/1A power adapter, 5V portable charger (power bank), or battery.

Specific Features by Configuration:

• 2.4GHz + 2.4GHz (AB023): Features 2.5dB ultra-low noise and works with certified IEEE 802.11b/g/n Wireless LAN devices, boosting power by 50X.
• 2.4GHz + 5.8GHz (AB022): Features 3.0dB ultra-low noise and works with certified IEEE 802.11a/n Wireless LAN devices, boosting power by 80X.
• 5.8GHz + 5.8GHz (AB025): Features 3.0dB ultra-low noise and works with certified IEEE 802.11a/n Wireless LAN devices, boosting power by 80X.

Especificacions

2.4GHz Channel Parameters (Common to 2.4GHz+2.4GHz and 2.4GHz+5.8GHz options)

5.8GHz Channel Parameters (Common to 2.4GHz+5.8GHz and 5.8GHz+5.8GHz options)

Contingut del paquet

El paquet normalment inclou:

• EDUP WiFi Signal Booster Unit
• Antennas (quantity and type may vary based on selected option)
• Power cable (Note: Power supply unit is not included)
• USB cable (for power bank option)

Instruccions de configuració

1. Prepara el teu dispositiu: Ensure your Access Point (AP) Router or wireless device has an SMA detachable antenna connector. The booster requires an input power range between 3dBm and 20dBm from your device to function correctly.
2. Col·loca les antenes: Carefully screw the provided antennas onto the 'TO ANT' ports of the EDUP WiFi Signal Booster. Ensure they are securely fastened.
3. Connect to AP/Router: Connect the booster to your Access Point Router using appropriate cables. The 'TO AP' ports on the booster connect to your router's antenna ports.
4. Connectar l'alimentació: Plug the power adapter (not included) into the booster's 2.5*0.7mm DC power socket. You can use a 12V/1A power supply, a 5V portable charger (power bank), or a battery.
5. Encès: Once all connections are secure, power on your Access Point Router and the EDUP WiFi Signal Booster. The LED indicators on the booster will show its status (Green for Transmitter, Red for Receiver).

Nota important:

• This product does not come with a power supply. You will need to provide your own 12V/1A power adapter or compatible 5V power source.
• The Access Point Router is NOT included and is required for the booster to function.

Funcionament

The EDUP WiFi Signal Booster is designed for simple plug-and-play operation. Once correctly installed and powered on, it automatically amplifies the WiFi signal from your connected Access Point Router. No additional software or configuration is typically required.

• Indicadors LED: Observe the LED indicators on the booster. A green light typically indicates transmission, while a red light indicates reception.
• Millora del senyal: You should experience improved link quality and extended coverage for your wireless devices within the amplified area.

Manteniment

• Dissipació de calor: For optimal performance and longevity, heat dissipation is recommended. Consider adding a heat sink or a radiator fan, especially during prolonged use or in warm environments.
• Neteja: Keep the device clean and free from dust. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
• Condicions ambientals: Operate the booster within the specified operating temperature (-30℃～+70℃) and humidity (up to 95% rel. humidity) ranges.

Resolució de problemes

• Sense senyal Amplificació:
  • Assegureu-vos que tots els cables estiguin ben connectats.
  • Comproveu que la font d'alimentació estigui connectada i funcioni.
  • Check if your Access Point Router is powered on and transmitting a signal.
  • Confirm that your device's output power is within the 3dBm to 20dBm range.
• Mala qualitat del senyal:
  • Check antenna connections; ensure they are tight.
  • Ensure proper heat dissipation to prevent overheating, which can affect performance.
  • Verify that the booster is compatible with your router's frequency band (2.4GHz or 5.8GHz).
• Els indicadors LED no s'encenen:
  • Confirm the power supply is connected and providing power to the booster.
  • Comproveu el cable d'alimentació per si hi ha danys.

Consells per a l'usuari

• Always connect the antennas and power adapter in the correct sequence: antennas first, then power.
• For optimal performance, ensure your router's output power is within the recommended range (3dBm to 20dBm).
• Consider the specific frequency configuration (2.4GHz+2.4GHz, 2.4GHz+5.8GHz, or 5.8GHz+5.8GHz) to match your existing wireless network setup.
• If using a power bank, ensure it can provide stable power for extended periods.

Garantia i Suport

Your EDUP WiFi Signal Booster comes with a 1-year warranty from the date of purchase. For any technical assistance or warranty claims, please contact your seller or refer to the official EDUP support channels.

For products ordered from China, a 75-day money-back guarantee may apply. Please check with your retailer for specific terms and conditions.