DIEWU PH45 Dual M.2 NVMe PCIe x8 Split Card Instruction Manual

1. Introducció

The DIEWU PH45 Dual M.2 NVMe PCIe x8 Split Card is designed to expand your system's storage capabilities by allowing the installation of two M.2 NVMe SSDs into a single PCI-E x8 or x16 slot. This adapter supports PCI-E 3.0 and PCI-E 4.0 standard transmission speeds, enabling high-speed data transfer and the potential for RAID configurations to enhance performance or data redundancy. It is an ideal solution for users looking to upgrade their system's storage performance, especially for gaming, design, and video editing applications.

Davant view of the PH45 Dual M.2 NVMe PCIe x8 Split Card with full bracket, showing M.2 slots. — Figure 1: PH45 Dual M.2 NVMe PCIe x8 Split Card (Full Bracket)

2. Contingut del paquet

Si us plau, verifiqueu que tots els elements siguin presents al paquet:

1 x DIEWU PH45 Dual NVME RAID PCI-E X8 Split Card
1 x Baffle (Full-height or Half-height, depending on selection)
1 x tornavís
1 Set of Screws (Chassis screw, lock baffle screws, locking plate screws, mobile studs)

Image showing the PH45 card along with included accessories: half-height chassis baffle, chassis screw, lock baffle screws, locking plate screws, mobile studs, and a screwdriver. — Figure 2: PH45 Card and Included Accessories

3. Configuració i instal·lació

Before installation, ensure your system meets the compatibility requirements outlined below.

3.1 Requisits del sistema

Suport de la placa base: The motherboard must support the PCI-E split function (e.g., PCI-E X4X4X4 or 4X4 mode). Some motherboards may also require support for PCI-E RAID functionality. Refer to your motherboard's manual or manufacturer's website for specific details (e.g., ASUS HyperM.2X16 expansion card support, ASRock Ultra Quad M.2 Card support).
Suport de CPU: The CPU must have sufficient PCI-E channels to support the desired configuration. Low-end CPUs may have limited PCI-E channels and might not fully support multiple M.2 SSDs. Consult your CPU specifications.
Available PCI-E Slot: An available PCI-E x8 or x16 slot is required.

3.2 Installing M.2 NVMe SSDs on the Card

Carefully align your M.2 NVMe SSD with the M.2 slot on the PH45 card. The card supports M KEY hard disks of various lengths (2230, 2242, 2260, 2280, 20110).
Insert the SSD firmly into the slot at an angle.
Gently push down the SSD and secure it with the appropriate mobile stud and screw provided in the package. Ensure the SSD is seated correctly and securely.

Diagram illustrating supported M.2 SSD form factors (2230, 2242, 2260, 2280, 20110) and their mounting points on the card. — Figure 3: Supported M.2 SSD Form Factors

3.3 Installing the PH45 Card into the Motherboard

Power off your computer and disconnect all power cables.
Obriu la caixa de l'ordinador.
Locate an available PCI-E x8 or x16 slot on your motherboard.
If necessary, remove the corresponding expansion slot cover from your computer case.
Align the PH45 card's PCI-E x8 interface with the motherboard's PCI-E slot.
Press down firmly and evenly on the card until it is fully seated in the slot.
Secure the card to the chassis with the provided chassis screw. If using a low-profile case, replace the full-height baffle with the included half-height baffle.
Tanqueu la carcassa de l'ordinador i torneu a connectar tots els cables d'alimentació.
Enceneu l'ordinador.

Close-up of the PCIe x8 interface, highlighting the thickened gold-plated contacts for stable transmission. — Figure 4: Thickened Gold Finger PCI-E x8 Interface

Figure 5: PH45 Dual M.2 NVMe PCIe x8 Split Card (Low-Profile claudàtor)

4. Instruccions de funcionament

Once installed, your operating system should detect the new M.2 NVMe SSDs. You may need to initialize and format the drives through Disk Management (Windows) or Disk Utility (macOS/Linux) before they can be used.

4.1 Configuració RAID

If your motherboard supports PCI-E RAID, you can configure the installed M.2 NVMe SSDs into a RAID array (e.g., RAID 0 for performance, RAID 1 for redundancy) through your motherboard's BIOS/UEFI settings. Refer to your motherboard's manual for detailed instructions on setting up RAID.

4.2 Indicadors d'estat

The PH45 card features LED indicators to show its working status. When the card is powered on, the indicators will be continuously lit. During read and write operations to the installed SSDs, the indicators will flash.

Image showing the PH45 card with LED indicators, demonstrating the working status (always on when powered, flashes during read/write). — Figure 6: Working Status Indicators

5. Manteniment

The PH45 card is designed for durability and stable operation. No specific user maintenance is required beyond ensuring proper airflow within your computer case to prevent overheating. Keep the card free from dust and moisture. Avoid touching the gold contacts directly to prevent static discharge or corrosion.

Image showing the PH45 card, emphasizing the high-end PCB circuit board and surface gold plating for good conductivity and wear resistance. — Figure 7: High-End PCB with Gold Plating

Image showing the PH45 card, highlighting the imported high-power DC chip for stable SSD operation. — Figure 8: Imported High-Power DC Chip for Stable Operation

6. Solució De Problemes

SSDs Not Detected:
- Motherboard PCI-E Split Function: Ensure your motherboard's BIOS/UEFI settings have the PCI-E split function enabled and configured correctly (e.g., X4X4X4 or 4X4 mode). Without this, the motherboard may only recognize one or none of the M.2 SSDs.
- PCI-E RAID Function: If you intend to use RAID, confirm that the PCI-E RAID function is enabled in your motherboard's BIOS/UEFI.
- CPU PCI-E Channels: Verify that your CPU has enough available PCI-E channels. Lower-end CPUs might not support the full bandwidth required for two NVMe SSDs.
- Shared PCI-E Channels: Many motherboards share PCI-E channels between different slots or onboard devices. If the system cannot recognize all M.2 SSDs, try removing other PCI-E devices (e.g., graphics cards, other expansion cards) or moving the PH45 card to a different PCI-E slot.
- SSD Seating: Re-seat the M.2 NVMe SSDs on the PH45 card and ensure the PH45 card is fully seated in the motherboard's PCI-E slot.
Rendiment lent:
- PCI-E Version: Ensure the PH45 card is installed in a PCI-E slot that supports the highest possible version (PCI-E 4.0 for optimal performance, if your system supports it).
- Instal·lació del controlador: Ensure the latest NVMe drivers are installed for your operating system and SSDs.
- Configuració RAID: If using RAID 0, verify it is configured correctly in your motherboard's BIOS/UEFI.

7. Especificacions

Característica	Descripció
Nom del producte	Dual NVME RAID PCI-E X8 Split Card
Model	PH45
Tipus d'interfície	PCI Express x8
Supported PCI-E Versions	PCI-E 3.0, PCI-E 4.0
Suport de disc dur	M KEY NVMe SSDs (2230, 2242, 2260, 2280, 20110)
Nombre de ranures M.2	2 (supports two X4 full-channel full-speed NVME SSDs)
Velocitat de transmissió	2 * 32Gbps
Material PCB	High-end PCB circuit board with surface gold plating
Gestió d'energia	Imported high-power DC chip for stable operation
Dimensions (L x A x A)	15 cm x 12 cm x 8 cm (approximate package size)
Pes net	36.2 g

8. Garantia i Suport

For technical support, troubleshooting assistance, or warranty inquiries, please contact the seller or manufacturer directly. Keep your purchase receipt for warranty validation.

9. Consells d'usuari

BIOS/UEFI Update: Ensure your motherboard's BIOS/UEFI is updated to the latest version, as this often includes improved compatibility and support for new hardware like NVMe SSDs and PCIe bifurcation.
Refrigeració: For optimal performance and longevity of NVMe SSDs, especially in RAID configurations, consider adding M.2 heatsinks to your SSDs if they don't come with one, and ensure good airflow within your PC case.
Instal·lació del sistema operatiu: If installing your operating system on an NVMe RAID array, you may need to load specific RAID drivers during the OS installation process.