1. Introducció
The Genmitsu CFL55 Compressed Spot Laser Module is a high-performance laser upgrade designed for precision engraving and cutting. Featuring an ultra-fine 0.1mm*0.1mm laser spot and 5.5W optical power, it offers enhanced capabilities for detailed work on a variety of materials. This manual provides essential information for safe and effective use of your laser module.
2. Informació de seguretat
DANGER: LASER RADIATION. AVOID EYE OR SKIN EXPOSURE TO DIRECT OR SCATTERED RADIATION.
- Always wear appropriate laser safety goggles (OD4+) when operating the laser module.
- Ensure the work area is well-ventilated to dissipate fumes and smoke generated during engraving/cutting.
- Never leave the laser module unattended during operation.
- Mantingueu els materials inflamables allunyats de la trajectòria del làser.
- The integrated laser shield on the module is designed to filter most UV light and protect against laser beam reflection. However, additional eye protection is mandatory.
- Do not attempt to disassemble or modify the laser module.
3. Configuració i instal·lació
This laser module is designed for specific Genmitsu and Jinsoku machines. Ensure your machine is powered off and disconnected from the power source before installation.
- Muntatge: Attach the laser module to your machine's spindle or designated laser mount.
- Adapter Plates:
- For Jinsoku LE-1620 Laser Engraver and Jinsoku LC-60A Laser Engraver & Cutter, use the provided adapter plates.
- For Genmitsu PROVerXL 4030 & 4040-PRO CNC Router, use the adapter plate that came with your 4030 package. No additional adapter plate is supplied with this laser module for these models.
- Connexió elèctrica: Connect the laser module to your machine's control board using the XH2.54-3Pin terminal. The pinout is: a: PWM +, b: GND, c: 12VDC.
- Connexió d'assistència aèria: If using the stock air assist nozzle, connect an air pump (not included) to the nozzle's inlet for improved cutting performance and lens protection.
4. Instruccions de funcionament
The CFL55 module is capable of both engraving and cutting. Always perform test runs on scrap material to determine optimal power and speed settings for your specific material.
- Configuració del programari: Use compatible laser control software (e.g., LightBurn, LaserGRBL) to prepare your design and configure laser settings.
- Enfocament: The module features a fixed focus design with a focal length of 30mm. Ensure your material is positioned at this distance from the laser lens for optimal performance.
- Col·locació del material: Place your material securely on the workbed. Ensure it is flat and stable.
- Inici de l'operació: Initiate the engraving or cutting process through your control software. Monitor the process closely.
- Air Assist: For cutting and to achieve cleaner engravings, activate the air assist system. This helps clear debris and smoke, preventing charring and protecting the lens.
Video 1: Demonstration of the Genmitsu CFL55 Laser Module engraving a metal flask.
5. Manteniment
Regular maintenance ensures optimal performance and longevity of your laser module.
- Neteja de lents: Periodically clean the laser lens with a soft, lint-free cloth and isopropyl alcohol. Ensure no dust or debris accumulates on the lens, as this can affect laser performance and lifespan.
- Broquet d'assistència d'aire: Keep the air assist nozzle clear of any blockages.
- Aletes de refrigeració: Ensure the cooling fins on the module are free from dust and debris to maintain efficient heat dissipation.
- Connexions: Reviseu regularment totes les connexions elèctriques per assegurar-vos que estiguin ben fixades.
6. Solució De Problemes
If you encounter issues with your laser module, consider the following common problems and solutions:
- Sense sortida làser: Check power connections, ensure the module is correctly seated, and verify software settings (laser enabled, power set above zero).
- Weak Engraving/Cutting: Ensure the material is at the correct focal distance (30mm). Clean the laser lens. Increase laser power or reduce speed in your software.
- Resultats inconsistents: Check for loose mechanical components on your machine. Ensure the material is held firmly and not moving during operation. Verify software settings for consistency.
- Sobreescalfament: Ensure the cooling fan on the module is operating correctly and that the cooling fins are clean. Operate within recommended duty cycles.
7. Especificacions
| Característica | Detall |
|---|---|
| Optical Laser Power | 5.5W |
| Mida del punt | 0.1 mm x 0.1 mm |
| Distància focal | 30 mm |
| Longitud d'ona làser | 455 ± 5 nm |
| Entrada Voltage / Actual | 12 V / 2.5 A |
| Interfície elèctrica | XH2.54-3Pin terminal (PWM+, GND, 12VDC) |
| Materials gravables | Cardboard, plastic, PCB, aluminium alloy, stainless steel, black metal, etc. |
| Materials tallables | Wood, acrylic, cardboard, non-woven fabric, bamboo, laser safe plastic, etc. |
8. Compatibilitat
The Genmitsu CFL55 Compressed Spot Laser Module is compatible with the following machines:
- Genmitsu PROVerXL 4030 CNC Router
- Genmitsu PROVerXL 4040-PRO CNC Router
- Jinsoku LE-1620 Laser Engraver
- Jinsoku LC-60A Laser Engraver & Cutter
9. Consells d'usuari
- For cutting thicker materials like 4mm plywood, multiple passes at lower power settings can yield cleaner cuts than a single high-power pass.
- Experiment with different air assist pressures. Higher pressure can help with cutting and reduce charring, but too much can affect fine engraving details.
- Always ensure your work surface is level to maintain consistent focus across the entire engraving/cutting area.
10. Garantia i Suport
For warranty information, technical support, or further assistance, please refer to the official Genmitsu weblloc web o poseu-vos en contacte amb el vostre distribuïdor. Conserveu el rebut de compra per a reclamacions de garantia.
