3-in-1 Laser Rangefinder and Tape Measure User Manual

Introducció

This manual provides detailed instructions for the safe and effective use of your 3-in-1 Laser Rangefinder and Tape Measure. This versatile device combines a digital laser rangefinder, a 5-meter tape measure, and a laser cross-marking function into a single, compact unit. It is designed for various measurement tasks in road engineering, housing, construction, water conservancy, electric power, and pipeline projects.

Característiques del producte

• Disseny 3 en 1: Integrates digital laser ranging (40m/60m options), a 5m tape measure, and laser cross-marking.
• Construcció duradora: High elasticity and toughness ABS+TPR housing, anti-slip, drop-resistant, and dust-proof for extended service life.
• Pantalla LCD clara: Backlit display ensures clear visibility of measurement data even in low-light conditions.
• 5m Tape Measure: Coated manganese steel tape with a ruler hook for easy use, featuring both imperial and metric scales.
• Mecanisme d'autobloqueig: The tape measure automatically locks in position when pulled out and retracts safely with the unlock button.
• Laser Cross-Marking: Provides horizontal and vertical line references for renovation projects.
• Múltiples funcions de mesura: Supports single/continuous measurement, area measurement, volume measurement, and Pythagorean measurement.
• Memòria de dades: Stores up to 20 groups of historical measurement data.

Identificació de components

1. Visualització: Shows measurement readings, units, battery status, and historical data.
2. Tape Measure Take Back Button: Press to retract the tape measure safely.
3. Lent: Laser receiver lens.
4. Emissor làser: Emet el raig làser per mesurar la distància.
5. Compartiments de la bateria: Holds 2 x 1.5V AAA batteries.
6. Power off/RE-ZERO Button: Long press to power off, short press to reset measurement.
7. Measurement Units Switch / View Storage Data Button: Short press to cycle through units (m/in/ft), long press to view dades emmagatzemades.
8. Power On/Measure Button: Short press to turn on or initiate a laser measurement.
9. Switch between Front-and-Rear Reference and Measurement Modes Button: Changes the measurement reference point (front or rear of the device) and cycles through measurement modes (single, continuous, area, volume, Pythagorean).
10. Cross Laser Emitter: Emits horizontal and vertical laser lines for marking.
11. Tape Measure Port: Where the tape measure extends from.

Configuració

1. Instal·lació de la bateria

1. Locate the battery compartments on the device.
2. Obriu la tapa de la bateria.
3. Introduïu 2 piles AAA d'1.5 V, assegurant-vos de la polaritat correcta (+/-).
4. Tanqueu la tapa de la bateria amb seguretat.

Nota: Les piles no estan incloses amb el dispositiu.

2. Encès

Press the 'Power On/Measure Button' (labeled 'ON MEAS') to turn on the device. The LCD display will light up.

Instruccions de funcionament

1. Using the Tape Measure

1. Gently pull the tape measure from the 'Tape measure port'.
2. The self-locking device will automatically hold the tape at the desired length.
3. To retract the tape, press the 'Tape measure take back button'. Allow the tape to retract slowly to prevent injury.

2. Using the Laser Rangefinder

Assegureu-vos que el dispositiu estigui encès.

a. Single Measurement

1. Point the 'Laser emitter' at the target.
2. Press the 'Power On/Measure Button' (ON MEAS) once. The laser will activate.
3. Press the 'Power On/Measure Button' again to take a measurement. The distance will be displayed on the LCD.

b. Continuous Measurement

1. Press the 'Switch between Front-and-Rear Reference and Measurement Modes Button' until the continuous measurement icon appears on the display.
2. Press the 'Power On/Measure Button' (ON MEAS). The device will continuously measure and display the distance as you move it.
3. Press the 'Power On/Measure Button' again to stop continuous measurement.

c. Area Measurement

1. Press the 'Switch between Front-and-Rear Reference and Measurement Modes Button' until the area measurement icon appears.
2. Take the first measurement (e.g., length) by pointing the laser and pressing 'ON MEAS'.
3. Take the second measurement (e.g., width) by pointing the laser and pressing 'ON MEAS'.
4. El dispositiu calcularà i mostrarà l'àrea automàticament.

d. Volume Measurement

1. Press the 'Switch between Front-and-Rear Reference and Measurement Modes Button' until the volume measurement icon appears.
2. Take three consecutive measurements (length, width, height) by pointing the laser and pressing 'ON MEAS' for each.
3. El dispositiu calcularà i mostrarà el volum automàticament.

e. Pythagorean Measurement

1. Press the 'Switch between Front-and-Rear Reference and Measurement Modes Button' until the Pythagorean measurement icon appears.
2. Follow the on-screen prompts to measure the required sides (e.g., hypotenuse and one leg) by pointing the laser and pressing 'ON MEAS'.
3. El dispositiu calcularà i mostrarà el costat desconegut.

3. Canvi d'unitats

Short press the 'Measurement Units Switch / View Storage Data Button' (labeled 'Unit') to cycle through measurement units: meters (m), inches (in), and feet (ft).

4. Reference Point Switching

Press the 'Switch between Front-and-Rear Reference and Measurement Modes Button' to change the measurement reference point between the front edge and the rear edge of the device. This is important for accurate measurements depending on where you place the device.

5. Laser Cross-Marking

To activate the laser cross-marking function, press the dedicated 'Cross laser emitter' button (if available, or cycle through modes until cross-marking is active). This will project horizontal and vertical laser lines onto a surface for alignment and marking purposes.

6. Viewdades històriques

Long press the 'Measurement Units Switch / View Storage Data Button' (Unit) to access the historical data memory. The device can store up to 20 groups of data. Use the measurement mode button to navigate through stored entries.

Manteniment

• Neteja: Netegeu el dispositiu amb un drap suau i sec. No utilitzeu productes de neteja abrasius ni dissolvents. Mantingueu la lent del làser neta per obtenir mesures precises.
• Substitució de la bateria: Replace batteries when the low battery indicator appears on the display. Always use new 1.5V AAA batteries. Remove batteries if the device will not be used for an extended period.
• Emmagatzematge: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures (-10℃ to 50℃).
• Evitar l'impacte: While the device is drop-resistant, avoid unnecessary impacts to maintain accuracy and longevity.

Resolució de problemes

• El dispositiu no s'encén: Comproveu si les piles estan inserides correctament i no estan esgotades. Canvieu les piles si cal.
• Inaccurate laser measurements: Ensure the laser lens is clean and unobstructed. Verify the correct reference point (front/rear) is selected. Ensure the target surface is reflective enough for the laser.
• Tape measure does not retract: Check for any obstructions in the tape measure port. Ensure the 'Tape measure take back button' is fully pressed.
• La pantalla és tènue o il·legible: Replace batteries. Ensure the device is within the specified operating temperature range (0-40℃).
• Laser does not activate: Ensure the device is powered on and the 'Power On/Measure Button' is pressed correctly.

Especificacions

Consells per a l'usuari

• For best laser measurement accuracy, ensure a clear line of sight to the target and a stable surface for the device.
• Always double-check your measurements, especially for critical projects.
• When using the tape measure, ensure the ruler hook is securely placed for precise readings.
• Familiarize yourself with the different measurement modes (single, continuous, area, volume, Pythagorean) to select the most appropriate one for your task.
• Regularly check the battery level to avoid interruptions during important measurements.

Garantia i Suport

For any issues, questions, or support regarding your Weytoll 3-in-1 Laser Rangefinder and Tape Measure, please contact the seller or manufacturer directly. Keep your proof of purchase for warranty claims. Specific warranty terms and conditions may vary by region and seller.