BURGIM 9-inch Car Radio Fascia and Wiring Kit

1. Producte acabatview

This kit provides the necessary components to install a 9-inch aftermarket Android car multimedia navigation audio system into specific vehicle models. It includes a custom-fit fascia frame, a wiring harness, and a CANbus decoder box to ensure seamless integration with your vehicle's electrical system.

1.1 Contingut del paquet

• 9-inch Car Radio Fascia Frame
• Suports de muntatge
• Wiring Harness with CANbus Protocol Box
• Adaptador d'antena
• Small Speaker (if included in your specific kit)
• USB Cable (if included in your specific kit)

2. Guia d'instal·lació

Abans de començar la instal·lació, assegureu-vos que el vehicle estigui apagat i que la bateria estigui desconnectada per evitar danys elèctrics.

2.1 Instal·lació mecànica

1. Carefully remove the original car radio and surrounding trim panels. Refer to your vehicle's service manual for specific instructions on trim removal.
2. Mount the new 9-inch Android head unit (not included) into the provided fascia frame using the mounting brackets.
3. Install the assembled head unit and fascia frame into the dashboard opening. Ensure all clips and screws are securely fastened.

2.2 Connexions elèctriques

1. Connect the provided wiring harness to the new Android head unit.
2. Locate the original car radio audio system connectors. The provided harness is designed for plug-and-play installation, eliminating the need for wire cutting.
3. Connect the vehicle's original connectors to the corresponding plugs on the new wiring harness.
4. Connect the antenna adapter to the head unit and the vehicle's antenna cable.
5. If your kit includes a separate small speaker, connect it as per the head unit's instructions, typically for hands-free calling or specific alerts.

Note on 16-PIN Power Interface:

• Ensure your head unit has a compatible 16-PIN power interface.
• The diagram above shows standard pin assignments for B+ (Yellow), GND (Black), ACC (Red), ILL (Orange), KEY1, KEY2, REVERSE, and speaker outputs (FR+, FR-, FL+, FL-, RL+, RL-, RR+, RR-).
• A fuse is integrated into the harness for protection.

2.3 CANbus Connection and Setup

The CANbus protocol box is crucial for integrating steering wheel controls and other vehicle data with your new head unit.

1. Locate the 8-PIN CAN plug on the wiring harness.
2. Plug this 8-PIN CAN plug into the corresponding 8-PIN CAN socket on your stereo head unit screen.

3. Operating Instructions (CANbus Configuration)

After physical installation and power-up, you must configure the CANbus settings on your Android head unit to ensure proper communication with your vehicle.

1. On your Android head unit, navigate to the Configuració menú.
2. Busca Configuració de fàbrica or a similar option. You may be prompted to enter a password. (If you do not know the factory password, please consult your head unit vendor).
3. Within Factory Settings, find CANbus Settings or Configuració del model.
4. Select the correct CANbus Brand. For this kit, the CANbus brand is Aixecar.
5. Select your specific Car Model (Opel Mokka, Vauxhall Mokka, or Buick Encore) and the corresponding year range (2012-2016).
6. Choose any specific configuration options if prompted.
7. Desa la configuració i reinicia la unitat principal.

It is recommended to update your head unit's MCU (Microcontroller Unit) to the latest version for optimal CANbus performance.

4. Manteniment

This product is a passive installation kit and requires minimal maintenance.

• Neteja: Utilitzeu un suau, damp cloth to clean the fascia frame. Avoid harsh chemicals or abrasive materials that could damage the finish.
• Inspecció: Periodically check that the fascia frame and head unit are securely mounted and that all wiring connections remain firm.

5. Solució De Problemes

• Head unit does not power on:
  • Check all power connections (B+, ACC, GND) on the 16-PIN harness.
  • Assegureu-vos que la bateria del vehicle estigui correctament connectada i carregada.
  • Verify the fuse in the wiring harness is intact.
• Els comandaments del volant no funcionen:
  • Confirm the 8-PIN CANbus plug is securely connected to the head unit.
  • Re-check the CANbus settings in the head unit's factory settings (Section 3). Ensure 'Raise' is selected as the CANbus brand and the correct car model/year is chosen.
  • If prompted for a factory password and you don't know it, consult your head unit vendor.
• Sense so dels altaveus:
  • Verify all speaker wire connections (FR+, FR-, FL+, FL-, RL+, RL-, RR+, RR-) are correct and secure.
  • Check the head unit's audio settings.
• La recepció de la ràdio és deficient:
  • Ensure the antenna adapter is correctly connected to both the head unit and the vehicle's antenna cable.

6. Especificacions

7. Consells d'usuari

• Head Unit Compatibility: Ensure that the 9-inch Android head unit you plan to install is compatible with the provided wiring harness and CANbus decoder. Check the head unit's specifications for its wiring interface and CANbus support.
• Instal·lació professional: If you are unsure about any step of the installation process, it is highly recommended to seek professional assistance from a qualified car audio technician.
• Prova abans del muntatge: Before fully reassembling your dashboard, perform a thorough test of all head unit functions, including power, audio, steering wheel controls, and any other integrated features, to ensure everything is working correctly.

8. Garantia i Suport

For any questions regarding the product, installation, or troubleshooting beyond the scope of this manual, please contact the seller or manufacturer directly. Keep your purchase receipt for warranty claims.