1. Producte acabatview
The Aibecy SL299 is a versatile laminator machine designed for both hot and cold lamination. It is suitable for various applications in schools, offices, photo studios, and for advertising printing. This set includes the laminator, laminating pouches, a paper cutter, and a corner rounder.
2. Safety & Warnings
Informació important de seguretat:
Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
- Avís: Keep the device and its cord out of reach of children under 3 years old.
- Keep away from children unless supervised by an adult.
- No utilitzeu aquest producte per a finalitats diferents a les previstes.
- Inspect the product before each use; do not use if damaged.
- Follow installation and operation guidelines to avoid injury.
- No exposar a l'aigua ni a la humitat.
- Handle with care to avoid cuts or injuries.
3. Especificacions
| Característica | Detall |
|---|---|
| Model | SL299 |
| Tipus | Pouch Laminator (Hot and Cold) |
| Color | Blanc |
| Tipus d'endoll | EU (220-240V) - Note: Other plug types (US, UK) may be available depending on region. |
| Rodets | 2 Rollers (Hot Shoe System) |
| Amplada d'entrada | 230 mm |
| Min Pouch Thickness | 160 (2*80) micron, 6.29mil |
| Max Pouch Thickness | 250 (2*125) micron, 10mil |
| Min Pouch Size | Credit Card Size (54*86mm) |
| Max Pouch Size | Mida A4 |
| Max Lamination Thickness | 0.5 mm |
| Velocitat de laminació | 28cm / min |
| Temps d'escalfament | 2-4 minuts |
| Consum d'energia | 260W |
| Interval de temperatura de treball | Approx. 115-125℃ |
| Temperatura de la closca | Approx. 30℃ |
| Mida de l'article (L*W*H) | 35.2 * 10.8 * 7.0 cm / 13.9 * 4.3 * 2.8 polzades |
| Pes de l'article | 864 g / 30.5 oz |
| Certificació | CE |
4. Configuració i funcionament
4.1 Configuració inicial
- Unpack the laminator and all accessories from the packaging.
- Place the laminator on a stable, flat surface with adequate ventilation.
- Assegureu-vos que l'interruptor d'alimentació estigui en la posició "OFF".
- Connect the power cord to a suitable electrical outlet (220-240V for EU plug models).
4.2 Hot Lamination
- Turn the power switch to the "HOT" setting.
- The red "POWER" indicator light will illuminate.
- Allow the machine to warm up for approximately 2-4 minutes. The green "READY" indicator light will turn on when the machine has reached the optimal laminating temperature (115-125℃).
- Insert your document into a laminating pouch, ensuring it is centered and there is an even border around the document.
- Feed the sealed edge of the pouch into the laminator's entry slot. The machine will automatically pull the pouch through.
- Once the laminated document exits the rear slot, place it on a flat surface to cool and flatten.
4.3 Cold Lamination
- Turn the power switch to the "COLD" setting.
- The green "READY" indicator light will illuminate immediately.
- Use special cold laminating pouches for this mode. Insert your document into the cold laminating pouch.
- Feed the sealed edge of the pouch into the laminator's entry slot.
- Once the laminated document exits, it is ready for use.
4.4 Using the ABS (Anti-blocking System) Button
In case of a paper jam or misfeed, press and hold the "ABS" button located on the side of the laminator. This will release the rollers, allowing you to gently pull out the jammed pouch. Release the button once the pouch is clear.
4.5 Using the Paper Cutter
The included paper cutter can be used to trim laminated documents or paper to desired sizes. Place the document under the cutting guide and slide the blade along the track to cut.
4.6 Using the Corner Rounder
The corner rounder is used to create smooth, rounded corners on laminated documents, enhancing safety and aesthetics. Simply insert the corner of your document into the slot and press down.
5. Manteniment
- Neteja: Ensure the laminator is unplugged and completely cool before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Emmagatzematge: Store the laminator in a dry, dust-free environment when not in use. Keep it away from direct sunlight and extreme temperatures.
- Roller Care: Periodically run a cleaning sheet (a piece of paper folded in half) through the laminator to remove any adhesive residue from the rollers.
6. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Laminator not turning on | Sense font d'alimentació | Check power cord connection and wall outlet. Ensure the power switch is in the ON/HOT/COLD position. |
| Pouch jammed | Misfeed, incorrect pouch size, or excessive thickness | Press and hold the ABS button to release the rollers, then gently pull out the pouch. Ensure correct pouch size and thickness for future use. |
| Poor lamination quality (bubbles, cloudy finish) | Insufficient heat (for hot lamination), incorrect pouch thickness, or old pouches | Ensure the machine has fully warmed up (green READY light is on). Use appropriate pouch thickness (160-250 microns). Try new pouches. |
| Laminator is too hot to touch | Normal operation (shell temperature approx. 30℃) or prolonged use | The shell temperature is designed to be around 30℃. If it feels excessively hot or emits smoke/odor, unplug immediately and contact support. Allow for cool-down periods during continuous working. |
7. Consells d'usuari
- Voltage Compatibilitat: The specified model (EU plug) operates on 220-240V. If your region uses 110V, ensure you have the correct model or a suitable voltage converter to avoid damage.
- Pouch Selection: Always use laminating pouches that are compatible with your document size and the laminator's thickness range (160-250 microns). Using incorrect pouches can lead to poor results or jams.
- Disponibilitat d'accessoris: Spare laminating pouches, paper cutter blades, and corner rounders are generally available for purchase separately. Check with your retailer for compatible accessories.
- Pre-cut Documents: For best results, trim documents to their final size abans lamination. Use the included paper cutter for clean edges.
- Cantonades arrodonides: After lamination, use the corner rounder to give your documents a professional finish and eliminate sharp edges.
8. Compliance Information & Support
8.1 Compliment
This product must comply with all applicable safety and regulatory requirements in the market where it is sold. The manufacturer is Feiruilande Shenzhen Shangmao Co., Ltd. and the EU Authorized Representative is SOLID AUTHORITY LIMITED.
For detailed compliance information, refer to the official user manual PDF: SL299 User Manual (PDF)
8.2 Suport tècnic
For any questions regarding product usage, troubleshooting, or other inquiries not covered in this manual, please contact the store customer service staff where you purchased the product.
Informació de contacte del fabricant:
- Fabricant: Feiruilande Shenzhen Shangmao Co., Ltd.
- Adreça: CN-3B01-50, Building A1, 1983 Creative Town, No. 29, Nanxin Street, Nanling Village, Nanwan Street, Longgang District, Shenzhen
- Tel: 86-13927483703
Representant autoritzat de la UE:
- Representant: AUTORITAT SOLIDA LIMITADA
- Adreça: 51 Bracken Road, Sandyford, Dublin 18, D18 CV48, Ireland
