Introducció
This manual provides comprehensive instructions for the setup, operation, and maintenance of your FIFINE BM88 Low-profile Microphone Boom Arm. Designed for optimal audio recording, this full-metal arm offers stability, flexibility, and integrated cable management to enhance your workspace.
Què hi ha a la caixa
Si us plau, verifiqueu que tots els components siguin presents al vostre paquet:
- Braç del micròfon
- Escriptori Clamp
- Rotatable Ball-Head
- 1/4" to 3/8" Adapter
- 3/8" to 5/8" Adapter
- Clau Allen
- Manual d'usuari
Especificacions
| Atribut | Valor |
|---|---|
| Tipus d'element | Grips & Mic Suspensions |
| Nom de marca | FIFINE |
| Número de model | BM88 |
| Material | Metall |
| Càrrega de pes | ≤1.5kg/3.3lbs |
| paquet | Sí |
| Origen | Xina continental |
| Substància química molt preocupant | Cap |
| Longitud del paquet | 35 cm |
| Amplada del paquet | 11 cm |
| Alçada del paquet | 9 cm |
| Pes del paquet | 1.5 kg |
Configuració
Follow these steps to set up your FIFINE BM88 Microphone Boom Arm:
- Adjunta el clauer de l'escriptoriamp: Assegureu l'escriptori clamp to your desk. Ensure the desk thickness is between 20-60mm (0.8-2.4in). Tighten the clamp firmly to prevent movement.
- Insert Boom Arm: Insert the base of the boom arm into the hole on the desk clamp.
- Attach Rotatable Ball-Head: Screw the rotatable ball-head onto the end of the boom arm.
- Muntar el micròfon: Attach your microphone to the ball-head. Use the appropriate 1/4" to 3/8" or 3/8" to 5/8" adapter if your microphone requires it.
- Gestió de cables: Open the covers on the boom arm's channels, route your microphone cable through them, and then close the covers to secure the cable. This keeps your setup tidy and prevents cable clutter.
Instruccions de funcionament
The FIFINE BM88 boom arm offers flexible adjustments for optimal microphone positioning:
- Posició d'ajust: The arm allows for 360° horizontal rotation and approximately 200° vertical adjustment. Gently move the arm to your desired position.
- Adjusting Tightness and Load-Bearing: Use the provided Allen wrench to adjust the rotational tightness and load-bearing strength at the arm's joints. This allows you to customize the arm's resistance to movement and ensure it securely holds your microphone.
- Low-Profile Disseny: The arm is designed to sit below your shoulder line, providing an unobstructed view of your screen and workspace.
Manteniment
- Regularly check all connections, especially the desk clamp and microphone mount, for tightness to ensure stability.
- Wipe the arm with a soft, dry cloth to remove dust and debris.
- Avoid using harsh chemicals or abrasive materials that could damage the finish or moving parts.
Resolució de problemes
- Microphone shaking or dropping: Assegureu-vos que l'escriptori clamp is securely tightened to the desk. Adjust the rotational tightness of the arm joints using the Allen wrench to increase resistance. Verify that the microphone is properly screwed onto the ball-head and that any adapters are securely fastened.
- Limited movement or stiff joints: Check if any joints are overtightened. Loosen them slightly with the Allen wrench if necessary. Ensure no cables are obstructing movement.
- Cable clutter: Re-route cables through the integrated cable management channels to keep your workspace clear.
Consells per a l'usuari
- For microphones like the FIFINE AM8, it is recommended to remove the 3/8" to 5/8" adapter first, then connect the 1/4" to 3/8" adapter directly to the microphone for a secure fit.
- The arm is compatible with microphones using 1/4", 3/8", or 5/8" screw threads, and supports a maximum load capacity of 1.5kg (3.3lbs). Always ensure your microphone's weight does not exceed this limit.
Garantia i Suport
For warranty information, technical support, or any inquiries regarding your FIFINE BM88 microphone boom arm, please contact FIFINE customer service directly through their official channels. Refer to the product packaging or the official FIFINE weblloc per obtenir dades de contacte.
