1. Introducció
The Jebao MDP Series WiFi Smart DC Water Return Pump is designed for efficient and reliable water circulation in both freshwater and marine aquarium tanks. Featuring advanced SINE wave technology for ultra-quiet operation and a smart LCD display controller with WiFi connectivity, this pump offers precise control and robust protection features to ensure optimal performance and longevity.
2. Característiques clau
- WiFi + Manual Control Function: Offers flexible control options via a smart controller or a mobile application.
- Smart AP Mode Control Function: Allows direct connection to the pump's controller without requiring a separate router.
- SINE Wave Technology: Ensures ultra-quiet operation and high, stable performance.
- IC Electronic Detection: Provides dry-run and locked rotor protection, with automatic power-off upon no water detection.
- Protecció del motor: Safeguards the motor if the rotor becomes blocked.
- No Copper Element: Suitable for both marine and freshwater environments, preventing copper contamination.
- Eix de ceràmica resistent al desgast: Contributes to a longer operational life for the pump.
- Volum baixtage DC Power Supply: Enhances safety and energy efficiency.
3. Què s'inclou
En desembalar-lo, comproveu que hi hagi tots els components següents:
- 1 x MDP Smart DC Pump
- 1 x WiFi Controller with LCD display
- 1 x Power Supply (AC Adapter)
- Various Inlet/Outlet Fittings and O-rings
- Manual d'usuari (aquest document)
4. Instruccions de configuració
- Desempaquetar components: Carefully remove all items from the packaging and check against the "What's Included" list.
- Connectar accessoris: Attach the appropriate inlet and outlet fittings to the pump. Ensure O-rings are properly seated for a watertight seal.
- Posició de la bomba: Place the pump in your desired location within the aquarium or sump. Ensure it is fully submerged if intended for submersible use, or properly plumbed for external use according to your system's design.
- Connecteu la bomba al controlador: Connect the pump's cable securely to the designated port on the WiFi LCD display controller.
- Connecteu la font d'alimentació: Plug the power supply (AC adapter) into the controller, then plug the AC adapter into a suitable power outlet.
- Encesa inicial: The pump will perform a self-test and the LCD display will illuminate.
Note: Always ensure the pump is properly installed and submerged (if applicable) before connecting to power to prevent dry-run damage.
5. Instruccions de funcionament
5.1 Control manual
The LCD display controller allows for direct adjustment of the pump's flow rate. Use the up/down arrows on the controller to increase or decrease the pump's power output and flow. The display will show the current power level (e.g., P23w) and a bar graph indicating intensity.
5.2 WiFi Control (App)
For advanced control and scheduling, download the Jebao Aqua app from the App Store (iOS) or Google Play Store (Android). Follow the in-app instructions to connect your pump to your smartphone via WiFi.
- Download and install the "Jebao Aqua" app.
- Obre l'aplicació i crea un compte o inicia la sessió.
- Select "Add Device" and follow the prompts to connect your MDP pump. The controller supports Smart AP mode, allowing direct connection without a router for initial setup.
- Once connected, you can adjust flow rates, set schedules, and monitor pump status remotely.
6. Manteniment
Regular maintenance ensures the longevity and optimal performance of your Jebao MDP pump.
- Desconnecteu l'alimentació: Desendolleu sempre la bomba de la presa de corrent abans de realitzar qualsevol manteniment.
- Impulsor net: Periodically remove the pump's front cover and impeller assembly. Clean any debris, algae, or calcium buildup from the impeller and its chamber using a soft brush and warm water. For stubborn buildup, a mild vinegar solution can be used, followed by thorough rinsing.
- Inspect Ceramic Shaft: Check the wear-resistant ceramic shaft for any signs of damage or excessive wear. Replace if necessary.
- Clean Inlet/Outlet: Ensure the inlet and outlet ports are free from obstructions.
- Torneu a muntar: Carefully reassemble the pump, ensuring all parts are correctly aligned and seals are intact.
Frequency of cleaning depends on water quality and usage, but a monthly check is recommended.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La bomba no funciona | No power; Dry-run protection activated; Locked rotor protection activated. | Check power connection. Ensure pump is submerged (if applicable). Check for obstructions around the impeller. Reset power. |
| Caudal reduït | Clogged impeller or intake; Air in the system; Incorrect flow setting. | Clean impeller and intake. Bleed air from plumbing. Adjust flow rate via controller or app. |
| Soroll/vibració inusuals | Debris in impeller; Worn impeller or shaft; Improper installation. | Clean impeller. Inspect impeller and ceramic shaft for damage and replace if necessary. Ensure pump is securely installed and not vibrating against surfaces. |
| Controller not responding/WiFi issues | Controller malfunction; WiFi signal interference; Incorrect app settings. | Restart controller. Check WiFi signal strength. Re-pair with app. Ensure app is updated. |
The pump features IC electronic detection for dry/locked rotor protection, automatically shutting off power if no water is detected or the motor is blocked. If these protections activate, address the underlying issue before restarting the pump.
8. Especificacions
| Model | Voltage | Poder | Q max (L/H) | H màx (m) | In / Out (Φ mm) |
|---|---|---|---|---|---|
| MDP-2500 | DC 24V | 23W | 2500 | 2.5 | 20/25 |
| MDP-3500 | DC 24V | 28W | 3500 | 3.5 | 20/25/30 |
| MDP-5000 | DC 24V | 40W | 5000 | 4.0 | 20/25/32/40 |
| MDP-6500 | DC 24V | 48W | 6500 | 4.5 | 20/25/32/40 |
| MDP-8500 | DC 24V | 65W | 8500 | 5.2 | 20/25/32/40 |
| MDP-10000 | DC 24V | 80W | 10000 | 6.0 | 20/25/32/40 |
| MDP-13000 | DC 24V | 95W | 13500 | 6.5 | 25/32/38/40/50 |
| MDP-15000 | DC 24V | 105W | 15000 | 7.0 | 25/32/38/40/50 |
| MDP-20000 | DC 36V | 165W | 20000 | 9.5 | 38/40/50 |
Especificacions generals:
- Material: Stainless steel (for certain components, typically shaft)
- Fixed Form: Assegut
- Font d'alimentació: Charge (DC Power Supply)
- Entrada Voltage: 110-240V (AC adapter input)
9. Consells d'usuari
- Funcionalitat del temporitzador: The WiFi controller, through the Jebao Aqua app, typically supports advanced scheduling features, including daily and weekly timers for precise control over pump operation cycles. Refer to the app's interface for detailed timer setup.
- Compatibilitat de la font d'alimentació: Ensure you select the correct power plug type (EU, US, AU, UK) when purchasing to match your region's electrical standards.
- Funcionament silenciós: To maximize the benefit of the SINE wave technology, ensure the pump is installed on a stable, vibration-dampening surface.
10. Garantia i Suport
Per obtenir informació sobre la garantia, assistència tècnica o consultes sobre el servei, poseu-vos en contacte directament amb el venedor o el fabricant. Conserveu el rebut de compra com a comprovant de compra.
