ID-COOLING IS-55 Low Profile Manual d'instruccions del refrigerador de CPU

1. Producte acabatview

The ID-COOLING IS-55 is a low-profile CPU air cooler designed for compact PC builds, including ITX systems. It features 5 heat pipes, a copper base, aluminum fins, and a 120mm fan, available in standard and ARGB variants. It offers efficient cooling for a wide range of Intel and AMD processors.

2. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• IS-55 CPU Cooler with pre-installed 120mm fan
• Mounting brackets for Intel and AMD sockets
• Placa posterior (per a sòcols Intel)
• Standoffs and screws
• Xeringa de pasta tèrmica
• Clau hexagonal

3. Guia d'instal·lació

The IS-55 cooler supports Intel LGA1700/1200/1151/1150/1155/1156 and AMD AM5/AM4 sockets. Follow the instructions carefully for your specific CPU platform.

3.1. Prepareu la placa base

1. Ensure your CPU is correctly installed in its socket.
2. Netegeu bé la superfície de la CPU amb alcohol isopropílic per eliminar qualsevol pasta tèrmica antiga o residus.
3. For Intel platforms (LGA1700/1200/115x), install the appropriate backplate on the rear of the motherboard, aligning the holes with the CPU socket mounting holes.
4. For AMD platforms (AM4/AM5), use the motherboard's existing backplate.

3.2. Install Mounting Brackets and Standoffs

1. Attach the correct mounting brackets to the cooler base using the provided screws.
2. Screw the appropriate standoffs into the backplate (Intel) or the motherboard's stock backplate (AMD).

3.3. Aplicar pasta tèrmica

• Apliqueu una petita quantitat, de la mida d'un pèsol, de pasta tèrmica al centre del difusor de calor integrat (IHS) de la CPU.
• No esteneu la pasta manualment; la pressió del refrigerador la distribuirà uniformement.

3.4. Mount the Cooler

1. Carefully place the cooler onto the CPU, aligning the mounting holes on the cooler brackets with the standoffs.
2. Secure the cooler by tightening the four spring-loaded screws in a diagonal pattern until snug. Do not overtighten.

3.5. Connect Fan and ARGB Cables

• Connecteu el cable del ventilador PWM de 4 pins al capçalera CPU_FAN de la placa base.
• If you have the ARGB version, connect the 3-pin ARGB cable to a compatible 5V ARGB header on your motherboard. Ensure correct polarity to avoid damage.

Note on ITX Motherboard Compatibility:

The IS-55 is designed with specific clearances to avoid common obstructions on ITX motherboards, including the integrated I/O cover, memory sticks (up to 33mm height), PCI-E connector, and CPU power/fan connectors.

4. Instruccions de funcionament

Once installed, the ID-COOLING IS-55 operates automatically based on your motherboard's fan control settings. The 4-pin PWM connector allows for precise fan speed control, adjusting RPM based on CPU temperature to balance cooling performance and noise levels.

• Control de velocitat del ventilador: The fan speed ranges from 500 to 2000 RPM (PWM controlled). You can configure fan curves in your motherboard's BIOS/UEFI settings or using compatible software.
• ARGB Lighting (if applicable): If you have the ARGB version, the lighting can be controlled via your motherboard's ARGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync, iGame Center) or a dedicated ARGB controller (not included).

5. Manteniment

Regular maintenance ensures optimal performance and longevity of your CPU cooler.

• Eliminació de pols: Periodically clean the fan blades and heatsink fins using compressed air or a soft brush. Ensure the fan is not spinning during cleaning.
• Pasta tèrmica: Es recomana tornar a aplicar pasta tèrmica cada 2-3 anys o si es treu el refrigerador per qualsevol motiu.
• Fan Longevity: The fan has a rated life of 100,000 hours. If the fan becomes excessively noisy or stops spinning, it may need replacement. The IS-55 supports self-convertible 25mm standard fans, allowing for replacement if space permits.

The cooler's module and heat pipe surfaces feature an antioxidant black coating to improve durability and value.

6. Solució De Problemes

• El ventilador no gira:
  • Check if the 4-pin PWM cable is securely connected to the CPU_FAN header on the motherboard.
  • Verify fan settings in BIOS/UEFI to ensure it's not set to a very low RPM or off.
• Temperatures altes de la CPU:
  • Ensure the cooler is securely mounted and making proper contact with the CPU.
  • Verify that thermal paste was applied correctly and adequately.
  • Check for dust buildup on the heatsink fins and fan blades, which can impede airflow.
  • Confirm that the fan is spinning at an appropriate speed.
• La il·luminació ARGB no funciona:
  • Ensure the 3-pin ARGB cable is correctly connected to a 5V ARGB header on the motherboard. Incorrect connection (e.g., to a 12V RGB header) can damage the LEDs.
  • Check your motherboard's ARGB software for lighting control settings.

7. Especificacions

8. Consells d'usuari

• Compact Chassis Recommendation: The IS-55 is ideal for compact chassis where radiator support height is ≥ 55mm. Always check your case's CPU cooler clearance before purchase and installation.
• Aplicació de pasta tèrmica: For best results, ensure the CPU surface is clean before applying thermal paste. A small pea-sized dot in the center is usually sufficient.
• Orientació del ventilador: Ensure the fan is oriented to push air through the heatsink towards the motherboard or exhaust, depending on your case's airflow design.

9. Garantia i Suport

For warranty claims or technical support, please contact the retailer or ID-COOLING customer service. Keep your proof of purchase for warranty validation.

For further assistance, refer to the official ID-COOLING weblloc web o contacteu amb els seus canals d'assistència.