1. Introducció
The MicroZone MC6C Mini V2 is a compact and lightweight 2.4G 6-channel remote control system designed for a wide range of RC models, including fixed-wing aircraft, drones, multirotors, helicopters, and boats. This system offers reliable control with advanced features such as runaway protection, simulation training compatibility, and long battery life. This manual provides essential information for the proper setup, operation, and maintenance of your MC6C Mini V2 remote control system.
2. Configuració
2.1 Instal·lació de la bateria del transmissor
- Localitzeu el compartiment de la bateria a la part posterior del transmissor.
- Obriu la tapa del compartiment de la bateria.
- Insert four (4) 1.5V AA batteries or two (2) lithium batteries, ensuring correct polarity. The transmitter requires a 6V power supply.
- Tanqueu bé la tapa del compartiment de la bateria.
2.2 Connexió del receptor
Connect the receiver to your model's components (servos, ESC, etc.) using the appropriate channels. The receiver provides PWM signals for individual channels and an SBUS signal for compatible flight controllers.
2.3 Binding Procedure (Pairing Transmitter and Receiver)
To establish communication between the transmitter and receiver:
- Assegureu-vos que el receptor estigui encès.
- Locate the 'BIND' button or contact point on the receiver.
- Press and hold the 'BIND' button/contact on the receiver.
- While holding the 'BIND' button, turn on the remote control transmitter.
- Release the 'BIND' button on the receiver once the binding process is successful (indicated by a solid LED light on the receiver).
3. Instruccions de funcionament
3.1 Controls del transmissor sobreview
Familiarize yourself with the various controls and indicators on the MC6C Mini V2 transmitter:
- Llum de potència: Indica l'estat d'alimentació.
- D/R Switch: Dual Rate switch for adjusting control sensitivity.
- Channel 5 & 6 Switches: Auxiliary channel controls.
- Rocker (Gimbals): Main control sticks for Aileron, Elevator, Throttle, and Rudder.
- Trim Levers: Fine-tune control surfaces (Throttle Trim, Elevator Trim, Rudder Trim, Aileron Trim).
- Interruptor d'alimentació: Encén/apaga el transmissor.
- Mode Light: Indica el mode de funcionament actual.
- Interruptor de mode: Changes between different flight modes.
- Lock Indicator & Switch: For locking certain functions.
- Channel Reverse Indicators: Show the current reverse status for AIL, ELE, THR, RUD.
- V Tail Mixed Control Indicator: Indicates V-tail mixing is active.
- Delta Wing Mixed Control Indicator: Indicates Delta wing mixing is active.
- Hybrid Control Function Switch: Activates hybrid control.
- Channel Forward Indicator: Indicates normal channel direction.
3.2 Channel Reverse Function
The transmitter supports channel reverse for Aileron (AIL), Elevator (ELE), Throttle (THR), and Rudder (RUD). Use the dedicated buttons to reverse the direction of these channels as needed for your model's setup.
3.3 Simulation Training
The MC6C Mini V2 remote control can be connected to a computer for simulation training. This allows users to practice flying skills without risking their physical models.
3.4 Runaway Protection Settings
The system includes runaway protection. If the receiver loses signal from the transmitter or the signal strength falls below a predefined threshold, the runaway protection will activate. This feature is designed to return the model to a safe state (e.g., throttle to idle, control surfaces neutral) to prevent damage.
4. Manteniment
- Keep the transmitter and receiver clean and free from dust and moisture.
- Avoid exposing the components to extreme temperatures or direct sunlight for prolonged periods.
- If not using the remote control system for an extended period, remove the batteries from the transmitter to prevent leakage.
- Regularly check all connections for security and wear.
5. Solució De Problemes
- Sense energia/Volum baixtage Alarma: If the LED indicator flashes and the buzzer sounds, replace the transmitter batteries immediately. Ensure batteries are inserted with correct polarity.
- Loss of Control/Signal: Re-perform the binding procedure to ensure the transmitter and receiver are properly paired. Check for potential interference sources in the operating environment. Ensure the transmitter batteries are fully charged.
- Resposta de control incorrecta: Verify that all servo connections to the receiver are correct. Check channel reverse settings on the transmitter.
- Limited Control Range: Ensure the transmitter antenna is fully extended (if applicable) and unobstructed. Check for environmental interference.
6. Especificacions
6.1 Transmitter (6C-MINI)
| Característica | Especificació |
|---|---|
| Model | 6C-MINI |
| Color | Blanc grisenc |
| Nombre de canals | 6 |
| Models aplicables | Fixed wing, car, boat, multi-axis, lawn mower, intelligent agricultural machinery |
| Interval de control | > 800 m |
| Interval de freqüència | 2401 MHz - 2478 MHz |
| Rocker Dynamic Range | 80% - 120% |
| Fine-tuning Mode | Electronic trimming |
| Transmissió de potència | ≤100mW |
| Entrada Voltage | DC4.5-9V |
| Mode de modulació | KSF |
| Requisits d'alimentació | 4 x 1.5V AA batteries or 2 x lithium batteries |
| Volum baixtage Alarma | Supported (LED indicator and buzzer) |
| Analog Interface (PPM) | Admet |
| Channel Forward/Reverse Indication | Admet |
| Runaway Protection Settings | Admet |
| Indicació LED | Admet |
| Supported Receivers | MC6RE-V2, MC7RB-V2, MC6RE, MC7RB, MC9002, E6R-E |
| Dimensions (L*W*H) | 160 mm * 80 mm * 165 mm |
| Pes | 470 g |
| Normes de certificació | FCC, CE_RED |
6.2 Receiver (MC6RE-V2 / MC7RB-V2)
| Característica | MC6RE-V2 | MC7RB-V2 |
|---|---|---|
| Model | MC6RE-V2 | MC7RB-V2 |
| Color | Marró transparent | Marró transparent |
| Aplicació | Fixed wing, multi-axle, car, boat | Fixed wing, multi-axle, car, boat |
| Sortida del canal | 6 PWM signals, 1 SBUS signal | 7 PWM signals, 1 SBUS signal |
| Banda de freqüència | 2401 MHz - 2478 MHz | 2401 MHz - 2478 MHz |
| Distància de recepció | > 800 m | > 800 m |
| Volum de subministrament del receptortage | DC4.5-6V | DC4.5-6V |
| SBUS Signal | Suport | Suport |
| Frequency-to-Frequency Mode | Contact pair frequency | Contact pair frequency |
| Recovery Performance | Recuperació ràpida del senyal | Recuperació ràpida del senyal |
| Runaway Protection Settings | Suport | Suport |
| Suport de control remot | 6C-MINI, C7-MINI, 8B-MINI, Classic-10 | 6C-MINI, C7-MINI, 8B-MINI, Classic-10 |
| Tipus d'antena | Antena externa | Antena integrada |
| Longitud de l'antena | 110 mm | N/A |
| Dimensions (L*W*H) | 37 mm * 23 mm * 13 mm | 42 mm * 30 mm * 13 mm |
| Pes | 7g | 7g |
7. Consells d'usuari
- Comproveu el contingut del paquet: The product may be sold as a transmitter-receiver set or individual components (e.g., 'only MC7RB-V2 RX'). Always verify your purchase to ensure you have all necessary parts.
- Practice with Simulator: Utilize the simulation training feature to hone your control skills before flying actual models, especially for complex maneuvers.
- Monitoritzar els nivells de bateria: Pay attention to the low voltage alarm to avoid unexpected power loss during operation.
- Understand Channel Reversing: Incorrect channel reversing can lead to unpredictable model behavior. Always test control surface directions carefully before flight.
8. Garantia i Suport
Per obtenir informació sobre la garantia, assistència tècnica o consultes sobre el servei, poseu-vos en contacte directament amb el venedor o el fabricant. Conserveu el rebut de compra com a comprovant de compra.
