1. Introducció
The K-TECH MG4010E-i10v3 is a high-performance dual encoders motor designed for advanced robotic applications such as mechanical arms, legged robots, AGV cars, and wearable robots. This motor features high power, large torque, and high precision, making it suitable for demanding tasks. It integrates an 18-bit single-turn absolute magnetic motor encoder and a 14-bit single-turn absolute magnetic reducer encoder, ensuring accurate position feedback even after power loss.
2. Informació de seguretat
Please read and understand all safety instructions before installing, operating, or maintaining the motor. Failure to follow these instructions may result in personal injury or equipment damage.
- Ensure power is disconnected before performing any installation or maintenance.
- Do not expose the motor to moisture, extreme temperatures, or corrosive environments.
- Handle with care to avoid damage to internal components, especially the encoders.
- Only qualified personnel should perform wiring and configuration.
- Comproveu el vol correctetage and current ratings before applying power.
3. Especificacions
The MG4010E-i10v3 motor boasts robust specifications for various robotic applications.
3.1 Especificacions generals
| Atribut | Valor |
|---|---|
| Número de model | MG4010E-i10v3 |
| Tipus | Servomotor |
| Construcció | Imant permanent |
| Commutació | Sense raspalls |
| Funció de protecció | Totalment tancat |
| Eficiència | IE 2 |
| Color | negre |
| Certificació | CE |
| Origen | Xina continental |
3.2 Paràmetres de rendiment
| Nom de l'element | Valor |
|---|---|
| Voltage | 24 V |
| Velocitat màxima | 320 rpm |
| Parell nominal | 2.5 Nm |
| Velocitat nominal | 260 rpm |
| Corrent nominal | 3.5 A |
| Potència màxima | 140 W |
| Max Torque | 4.5 Nm |
| Constant de velocitat | 108.3 rpm/V |
| Parell constant | 0.07 N.m/A |
| Torns | 14 |
| Winding Type | Y |
| Resistència de fase | 604 Ω |
| Inductància de fase | 0.28 mH |
| Pols del motor | 26 |
| Inèrcia del rotor | 202 gcm² |
| La temperatura del motor | SÍ |
3.3 Reducer Specifications (PG4210)
| Nom de l'element | Valor |
|---|---|
| Ratio de reducció | 1:10 |
| Reacció | ≤8 arcmin |
| Bearing Rated Load | 1000 N |
| Pes del motor | 250 g |
3.4 Drive Specifications (DG40)
| Nom de l'element | Valor |
|---|---|
| Volum d'entrada del disctage | 7.4-32 V |
| Comunicació | RS485 OR CAN |
| Freqüència de comunicació | RS485: 500Hz (115200bps) / CAN: 2KHz (1Mbps) |
| Codificador | 18bit (motor) + 14bit (reducer) Magnetic Encoder |
| Encoder Baudrate (RS485) | 9600, 19200, 57600, 115200, 230400, 406800, 1M, 2M bps |
| Baudrate (CAN) | 100K, 125K, 250K, 500K, 1M |
| Mode de control | Torque Loop (24KHz) / Speed Loop (8KHz) / Position Loop (4KHz) |
| Acceleration curve | Trapezoid acceleration |
4. Instal·lació i configuració
4.1 Dimensions i muntatge
Refer to the installation drawing for precise dimensions and mounting hole patterns. Ensure adequate clearance for wiring and heat dissipation.
4.2 Wiring and Interface Definition
The motor supports RS485 or CAN bus communication. Connect the motor to your control system using the defined interfaces. The drive board includes dual temperature sensor interfaces for real-time monitoring of motor and driver temperature.
| Interfície | Nota |
|---|---|
| A/H | RS485-A Or CAN-H |
| B / l | RS485-B Or CAN-L |
| V- | Font d'alimentació negativa |
| V+ | Font d'alimentació positiva |
| T | UART Transmitter |
| R | UART Receiver |
| G | Senyal GND |
5. Funcionament
5.1 modes de control
The MG4010E-i10v3 supports multiple control modes, including Torque Control, Speed Control, Multi Loop Angle Control, Single Loop Angle Control, and Increment Angle Control. These modes can be configured via the dedicated motor tool software.
5.2 Software Tool and Firmware Upgrade
A dedicated motor tool software is available for parameter adjustment, testing, and firmware upgrades. This software supports open-source development platforms such as PC, MCU, PLC, ICP, and RPI.
5.3 Característiques de protecció
The motor drive incorporates several protection features to ensure reliable operation and longevity, including Under Voltage Protection (UVP), Over Voltage Protection (OVP), Driver Temperature Protection (DTP), Motor Temperature Protection (MTP), Over Current Protection (OCP), Short Circuit Protection (SCP), Motor Stall Protection (MSP), and Low Input Power (LIP).
6. Manteniment
Regular maintenance helps ensure the longevity and optimal performance of your MG4010E-i10v3 motor.
- Neteja: Keep the motor housing clean and free from dust and debris. Use a soft, dry cloth. Avoid using solvents or harsh chemicals.
- Inspecció: Inspeccioneu periòdicament totes les connexions del cablejat per comprovar si estan ben ajustades i si hi ha signes de desgast o danys.
- Monitorització de la temperatura: Utilize the dual temperature sensors to monitor motor and driver temperatures, ensuring they remain within operational limits.
- Condicions ambientals: Ensure the motor operates within its specified environmental conditions (temperature, humidity) to prevent premature wear.
7. Solució De Problemes
If you encounter issues with your MG4010E-i10v3 motor, consider the following common troubleshooting steps:
- El motor no respon:
- Check power supply connections and ensure the input voltage està dins del rang de 7.4-32 V.
- Verify communication bus (RS485/CAN) wiring and baud rate settings in the software.
- Ensure the motor is not in a protected state (e.g., due to overcurrent or overtemperature). Check software diagnostics.
- Inaccurate Position/Speed:
- Confirm encoder connections are secure.
- Recalibrate the zero point using the motor tool software if necessary.
- Check for mechanical obstructions or excessive load.
- Sobreescalfament:
- Reduce the motor load or operating speed.
- Assegureu-vos una ventilació adequada al voltant del motor.
- Check for short circuits or incorrect wiring.
8. Consells d'usuari
- Software Familiarization: Spend time exploring the motor tool software. Understanding its features for parameter adjustment, testing, and diagnostics can significantly enhance your experience and help in fine-tuning performance.
- Encoder Advantage: Leverage the dual encoders (18-bit motor and 14-bit reducer) for precise control and position memory. This is particularly useful in applications requiring high accuracy and reliable homing after power cycles.
- Protocol de comunicació: Choose between RS485 and CAN communication based on your system's requirements for speed and network complexity. Ensure consistent baud rates across all connected devices.
9. Garantia i Suport
Per obtenir informació sobre la garantia, assistència tècnica o consultes sobre el servei, poseu-vos en contacte directament amb el venedor o el fabricant. Conserveu els registres de compra com a referència.