Convoy T3 500 Lumen EDC Flashlight User Manual

Introducció

The Convoy T3 is a compact and powerful Everyday Carry (EDC) flashlight designed for versatility and durability. Constructed from aluminum alloy with a micro-arc surface oxidation treatment, it offers a maximum luminous flux of 500 lumens. This manual provides essential information for the safe and effective use of your Convoy T3 flashlight.

Precaucions de seguretat

• Never point the light directly or indirectly at eyes or skin when it is on, as this may cause vision impairment or skin burns.
• Mantenir fora de l'abast dels nens.
• High mode generates heat at the head during prolonged use, which is normal. Use intermittently to preserve LED life.

Configuració

Instal·lació de la bateria

Important: The insulation tab inside the new battery compartment MUST be removed before installing batteries.

1. Obriu el compartiment de la bateria: Rotate the tail cap (or head) counterclockwise to unscrew it.

   

2. Remove the Insulation Tab: If batteries are included, locate and remove the colored plastic insulation tab. This step is MANDATORY.
3. Install Batteries Correctly: Check the polarity symbols inside the tube. Usually, the battery positive (+) end faces the head, and the negative (-) end faces the tail cap. The flashlight is powered by a single AA battery or a 14500 lithium battery. It is important to use unprotected batteries that can handle a current of 5 amps.

   

4. Torneu a muntar: After inserting batteries, align and screw the tail cap back on clockwise until snug (do not over-tighten).

Instruccions de funcionament

Encès/Apagat

• Twist Switch (Head/Tail): Tighten the head or tail cap fully to turn ON; loosen about half a turn counterclockwise to turn OFF.
• Tail Click Switch: Press the tail button to turn ON/OFF. A light press may be momentary ON; a full click locks it ON.
• Side Switch (If Applicable): Press the electronic switch on the body.

Canvi de mode

The Convoy T3 offers 13 groups of modes. Rapidly short-press the power button (tail or side switch) to cycle through different brightness modes (e.g., High-Medium-Low) and special modes (Strobe, SOS).

The flashlight features a mode memory function, allowing it to resume the last used mode when turned on again.

Volum baixtage Protecció

The flashlight includes low-voltage protection that flashes when the battery voltage is below certain levels. This ensures safe use and prevents deep battery discharge, extending battery life.

Manteniment

Neteja

Clean the lens and body with a soft, dry cloth. Avoid using corrosive chemicals, which can damage the flashlight's finish or components.

Resistència a l'aigua

The Convoy T3 has an IPX4 waterproof rating. Ensure O-rings are clean and all parts are tightly screwed for rated water resistance. Do not submerge non-diving lights deeply for long periods.

Cura de la bateria

Use only the specified model of battery. Do not mix old and new batteries, or batteries of different brands or types. Since lithium-ion batteries self-discharge, it is recommended that you remove the batteries if the flashlight will not be used for a long time, and charge them at least once every 2-3 months to maintain their health.

Resolució de problemes

Especificacions

Consells per a l'usuari

• Always ensure the battery is inserted with correct polarity to prevent damage to the flashlight.
• For optimal performance and safety, use high-quality, unprotected AA or 14500 lithium batteries capable of handling a 5A current.
• Familiarize yourself with the 13 mode groups to quickly access your preferred brightness and special modes. The mode memory feature will recall your last setting.
• Pay attention to the low-voltage protection flashes; this indicates it's time to replace or recharge your battery to avoid deep discharge.

Garantia i Suport

For any warranty claims or technical support, please contact the seller or manufacturer directly. Please keep this manual for future reference.

An official user manual in PDF format can be found here: Convoy T3 User Manual (PDF)