1. Producte acabatview
The Yesido EP04 are versatile over-ear headphones designed for both wireless and wired audio experiences. They feature Bluetooth 5.3 for stable connectivity, a 40mm driver for rich sound, and a foldable design for portability. With a long-lasting battery and comfortable ergonomic design, these headphones are suitable for various uses including gaming, music listening, and calls.
Figure 2: Ergonomic design for comfortable, non-inductive wearing
2. Configuració
2.1 Càrrega dels auriculars
- Locate the Type-C charging port on the headphones.
- Connect the provided Type-C charging cable to the headphones and a compatible USB power source (e.g., computer USB port, wall adapter).
- The charging indicator light will illuminate (color may vary) to show that charging is in progress.
- Una càrrega completa triga aproximadament 3 hores. El llum indicador canviarà o s'apagarà un cop finalitzada la càrrega.
The headphones are equipped with a 3.7V/200mAh built-in lithium battery, providing 20-25 hours of play time on a full charge.
2.2 Engegada/apagada
- Per encendre: Press and hold the Power button (usually located on one of the earcups) for a few seconds until you hear an audible prompt or see an indicator light flash.
- Per apagar: Premeu i manteniu premut el botó d'engegada de nou durant uns segons fins que sentiu un missatge audible o l'indicador lluminós s'apagui.
2.3 Emparellament Bluetooth (mode sense fil)
- Assegureu-vos que els auriculars estiguin completament carregats i apagats.
- Press and hold the Power button for approximately 5-7 seconds until the indicator light flashes rapidly (often blue and red alternately), indicating pairing mode.
- Al dispositiu (telèfon intel·ligent, tauleta, ordinador), activeu el Bluetooth i cerqueu els dispositius disponibles.
- Select "Yesido EP04" from the list of found devices.
- Once connected, the indicator light on the headphones will typically flash slowly or turn solid blue, and you will hear a confirmation tone.
- The headphones support Bluetooth version V5.3 and protocols HFP/HSP/A2DP/AVRCP/PBAP, offering a transmission range of up to 10 meters.
2.4 Connexió per cable
The Yesido EP04 headphones can also be used in wired mode, even if the battery is depleted.
- Locate the 3.5mm audio jack on the headphones.
- Connect one end of a 3.5mm audio cable (not always included, check package contents) to the headphone jack.
- Connect the other end of the 3.5mm audio cable to the audio output port of your device.
- Els auriculars canviaran automàticament al mode amb cable.
Figure 3: Switching between wired and wireless modes
3. Instruccions de funcionament
3.1 Controls bàsics
The headphones feature control buttons, typically located on one of the earcups. Refer to the diagram below for specific button functions (if available on product itself, otherwise general functions):
Figure 4: Close-up of headphone controls
- Botó d'encesa: Encendre/apagar, entrar en mode d'emparellament.
- Puja el volum (+): Augmenta el volum.
- Baixar el volum (-): Disminuir el volum.
- Multi-function Button (MFB) / Play/Pause: Reproduir/pausar música, respondre/finalitzar trucades.
- Pista següent: Press and hold Volume Up or specific button.
- Pista anterior: Press and hold Volume Down or specific button.
3.2 Cancel·lació activa del soroll (ANC)
The Yesido EP04 headphones support Active Noise Cancellation. Look for a dedicated ANC button or a specific combination of button presses to activate/deactivate this feature. When activated, ANC helps reduce ambient noise for a more immersive listening experience.
3.3 Game Low Latency Mode
For an optimized gaming experience, the headphones offer a low latency mode (0.06S). This feature synchronizes sound and picture, reducing delay during gameplay.
- Activació: Typically, this mode can be activated with a single click or a specific button press. Refer to the product's quick start guide or experiment with the control buttons.
Figure 5: Game low latency mode for synchronized audio and video
4. Manteniment
4.1 Neteja
- Use a soft, dry, lint-free cloth to clean the surface of the headphones.
- Do not use abrasive cleaners, alcohol, or chemical solvents, as these may damage the finish.
- Gently wipe the earcups and headband to remove dust and oils.
4.2 Emmagatzematge
The Yesido EP04 headphones feature a rotating axis design, allowing them to be folded for compact storage and easy portability.
- When not in use, fold the headphones to protect them from damage.
- Store them in a cool, dry place, away from direct sunlight and extreme temperatures.
- Eviteu col·locar objectes pesats a sobre dels auriculars.
Figure 6: Portable folding design for easy carrying
5. Solució De Problemes
- Els auriculars no s'encenen: Ensure the battery is charged. Connect to a power source using the Type-C cable and allow it to charge for at least 30 minutes before attempting to power on again.
- No es pot emparellar per Bluetooth:
- Ensure the headphones are in pairing mode (rapidly flashing indicator light).
- Make sure Bluetooth is enabled on your device and it's within the 10-meter transmission range.
- Try turning off and on Bluetooth on your device, or restarting both the headphones and your device.
- Oblida el dispositiu de la llista de Bluetooth i intenta emparellar-lo de nou.
- No hi ha so en mode sense fil:
- Comproveu si els auriculars estan correctament emparellats i connectats al dispositiu.
- Ajusteu el volum tant dels auriculars com del dispositiu connectat.
- Assegureu-vos que la font d'àudio s'està reproduint.
- No hi ha so en mode amb cable:
- Ensure the 3.5mm audio cable is securely connected to both the headphones and your device.
- Test the cable with another device if possible, or try a different 3.5mm cable.
- Check the volume settings on your device.
- Sound delay during gaming: Ensure that the Game Low Latency mode is activated.
6. Especificacions
| Característica | Especificació |
|---|---|
| Model | EP04 |
| Material | ABS, PC, PU Leather |
| Versió Bluetooth | V5.3 |
| Xip Bluetooth | JL7006F |
| Rang de transmissió | <10 m |
| Supported Bluetooth Protocols | HFP/HSP/A2DP/AVRCP/PBAP |
| Hora de jugar | 20-25 hores |
| Capacitat de la bateria | Bateria de liti integrada de 3.7 V/200 mAh |
| Interfície de càrrega | Tipus-C |
| Temps de càrrega | Aprox. 3 hores |
| Sortida d'àudio | Amb cable / sense fil |
| Diàmetre del conductor | 40 mm |
| Cancel·lació activa de soroll | Sí |
| Control de volum | Sí |
| Botó de control | Sí |
| Estil | Sobre l'orella |
| Disseny plegable | Sí |
| Joc Baixa latència | 0.06S |
Figure 7: 40mm large moving ring sound unit for high-quality audio
7. Consells d'usuari
- Maximitzar la comoditat: The ergonomic design ensures comfort for long listening sessions. Adjust the headband and earcups for a snug yet comfortable fit to prevent pressure or stuffiness.
- Canvi sense problemes: Avançanttage of both wireless and wired modes. Use Bluetooth for freedom of movement and switch to wired mode when battery is low or for devices without Bluetooth.
- Enhance Gaming: Remember to activate the dedicated low latency game mode for a more synchronized audio-visual experience during gaming.
- Portabilitat: Utilize the foldable design for easy storage and transport, protecting your headphones when on the go.
8. Garantia i Suport
Per obtenir informació sobre la garantia, assistència tècnica o consultes sobre el servei, consulteu les polítiques específiques del venedor o poseu-vos en contacte amb el punt de compra. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.





