CYCLAMI A2 Mini Portable E-Pump User Manual

1. Introducció

The CYCLAMI A2 Mini Portable E-Pump is a compact and efficient electric air inflator designed for various applications, primarily bicycle tires (MTB, road bikes) and other small inflatables like sports balls. Its cordless design and portability make it an ideal companion for outdoor activities and daily use. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your E-Pump.

2. Informació de seguretat

• Llegiu totes les instruccions abans d'utilitzar el dispositiu.
• Mantenir fora de l'abast dels nens.
• No feu funcionar la bomba a prop de líquids o gasos inflamables.
• Avoid prolonged operation to prevent overheating. Allow the device to cool down if it becomes excessively warm.
• Do not point the air nozzle at people or animals.
• Ensure the correct pressure is used for the item being inflated to prevent over-inflation and potential damage or injury.
• Use only the provided charging cable and a compatible QC charger for optimal performance and safety.
• No desmunteu ni intenteu reparar el dispositiu vosaltres mateixos. Contacteu amb l'assistència al client per obtenir assistència.

3. Contingut del paquet

Si us plau, reviseu el paquet per assegurar-vos que hi ha tots els elements:

• 1 x CYCLAMI A2 E-Pump
• 1 x Silicone Cover
• 1 x Schrader Valve (SV) Adapter
• 1 x Presta Valve (FV) Adapter
• 1 x agulla de bola
• 1 x Inflatable Hose (for SV)
• 1 x Adapter (for FV)
• 1 x cable de càrrega USB tipus C
• 1 x Fine Lanyard
• 1 x corretges de velcro
• 1 x Caixa d'embalatge

4. Producte acabatview

Familiarize yourself with the components of your CYCLAMI A2 E-Pump:

• Botó On/Off: Powers the device on/off and initiates inflation.
• Indicador de càrrega: Mostra l'estat de càrrega i el nivell de la bateria.
• Broquet d'aire: Connects to the valve of the item to be inflated.
• Port de càrrega tipus C: Per connectar el cable de càrrega.

The pump is compatible with both Schrader (SV) and Presta (FV) valves. An inflatable hose and an adapter are provided for versatile use.

5. Especificacions

6. Configuració

1. Carregueu la bomba: Before first use, fully charge the E-Pump. Refer to the 'Charging' section for details.
2. Attach Silicone Cover: For heat insulation and protection against scratches, place the provided silicone cover onto the pump.
3. Select and Attach Valve Adapter:
   • For Schrader Valves (AV): Use the inflatable hose (SV) directly with the pump's air nozzle.
   • For Presta Valves (FV): First, attach the FV adapter to the inflatable hose, then connect the hose to the pump's air nozzle. Ensure a secure connection.
   • For Ball Needles: Attach the ball needle to the appropriate valve adapter (usually SV) and then to the pump.
4. Connecta a l'element: Securely connect the chosen valve adapter/hose assembly to the valve stem of the tire or inflatable item.

7. Instruccions de funcionament

1. Encès: Press the On/Off button to turn on the E-Pump. The charging indicator may light up.
2. Connectar: Ensure the pump is securely connected to the item you wish to inflate via the appropriate valve adapter.
3. Inici de la inflació: Press the On/Off button again to begin inflation. The pump will start operating.
4. Monitor de pressió: The pump is designed for intelligent and precise inflation. Monitor the inflation process. For bicycle tires, it can inflate to 80 PSI in approximately 80 seconds.
5. Atura la inflació: Once the desired pressure is reached, press the On/Off button to stop the pump.
6. Desconnectar: Carefully disconnect the pump from the valve stem.
7. Apagar: Press and hold the On/Off button to power off the device when not in use.

8. Càrrega

The CYCLAMI A2 E-Pump features fast charging capabilities via its Type-C port.

1. Connect the provided Type-C USB charging cable to the pump's charging port.
2. Connect the other end of the cable to a compatible QC (Quick Charge) charger (5V 1.5A recommended).
3. L'indicador de càrrega mostrarà l'estat de càrrega.
4. A full charge can be achieved in approximately 25 minutes with a QC charger.
5. Un cop estigui completament carregat, desconnecteu el cable de càrrega.

9. Manteniment

• Neteja: Wipe the pump with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
• Emmagatzematge: Emmagatzemeu la bomba en un lloc fresc i sec, lluny de la llum solar directa i de temperatures extremes.
• Funda de silicona: Always use the special silicone cover to protect the pump from scratches and provide effective heat insulation during operation.
• Cura de la bateria: For optimal battery life, avoid completely draining the battery frequently. Charge the pump regularly, even if not in constant use.

10. Solució De Problemes

• Pump not turning on: Ensure the battery is charged. If not, connect to a charger.
• Pump not inflating: Check if the valve adapter is securely attached to both the pump and the item's valve stem. Ensure the valve stem is not blocked.
• Slow inflation: Verify the battery is sufficiently charged. A low battery can affect performance. Ensure the air nozzle and adapters are clean and free of debris.
• Sobreescalfament: If the pump feels excessively hot, turn it off and allow it to cool down before resuming use. Ensure the silicone cover is in place for heat insulation.
• L'indicador de càrrega no funciona: Try a different Type-C cable or QC charger to rule out cable/charger issues. Ensure the cable is fully inserted.

11. Consells d'usuari

• The CYCLAMI A2 is versatile and can be used for inflating bicycle tires (MTB, road), footballs, and even electric scooter tires.
• On a full charge, the pump can inflate two 700*25C bicycle tires from 0 to 80 PSI. It can also inflate approximately 20 footballs or 4-5 electric scooter tires.
• While suitable for various inflatables, this pump is not designed for high-pressure air suspension systems.
• The compact 'Mini' design makes it easy to carry in a jersey pocket, backpack, or attached to your bike frame using the included Velcro straps.

12. Garantia i Suport

For warranty information, technical support, or service inquiries, please refer to the seller's contact information or the product packaging. Keep your purchase receipt as proof of purchase.