Electronic Time Clock Employee Attendance System User Manual

1. Introducció

This manual provides essential information for the proper setup, operation, and maintenance of your Bisofice Electronic Time Clock Employee Attendance System (Model S-158). Please read this manual thoroughly before using the device to ensure safe and efficient operation.

2. Safety & Warnings

Informació important de seguretat:

• Read all instructions before use. Failure to follow these instructions may result in damage to the product or personal injury.
• Avís: Keep the device and its cord out of reach of children under 3 years old.
• Keep away from children unless supervised by an adult.
• No utilitzeu aquest producte per a finalitats diferents a les previstes.
• Inspect the product before each use; do not use if damaged.
• Follow installation and operation guidelines to avoid injury.
• No exposar a l'aigua ni a la humitat.
• Handle with care to avoid cuts or injuries.

3. Contingut del paquet

Si us plau, reviseu el paquet per assegurar-vos que hi ha tots els elements:

• 1 x Bisofice Electronic Time Clock (Model S-158)
• 2 x Inked Ribbons
• 1 x adaptador de corrent
• 100 x Time Cards
• 1 x Manual d'usuari (aquest document)

4. Producte acabatview

The Bisofice Electronic Time Clock is designed for efficient employee attendance tracking. It features automatic recording, red marking for late arrivals and early departures, and versatile installation options.

• Visualització de la setmana: Shows the current day of the week (SUN, MON, TUE, WED, THU, FRI, SAT).
• Visualització de l'hora: Mostra l'hora actual.
• Visualització de la data: Mostra la data actual.
• Current Print Position: Indicates where the time card will be stamped.
• Buttons 1 ('+'): Used to increase values during settings.
• Buttons 2 ('-'): Used to decrease values during settings.
• Buttons 3 ('Confirm'): Used to confirm selections during settings.
• Buttons 4, 5: Used for switching between options or modes.
• Buttons 6: Hold down for 3 seconds to enter or exit the setting mode.

5. Configuració

5.1 Connexió d'alimentació

1. Connect the provided power adapter to the time clock's power input port.
2. Plug the power adapter into a standard electrical outlet (100-240V, 50-60Hz).
3. La pantalla s'il·luminarà, indicant que el dispositiu està encès.

5.2 Configuració inicial de la data i l'hora

Refer to the 'Front Panel and Button Functions' image in Section 4 for button identification.

1. Press and hold Button 6 for 3 seconds to enter the setting mode.
2. Use Button 1 ('+') and Button 2 ('-') to adjust the hour, minute, day, month, and year.
3. Press Button 3 ('Confirm') to move to the next setting parameter.
4. Once all settings are correct, press and hold Button 6 again for 3 seconds to exit the setting mode.

5.3 Ribbon Installation

The time clock comes with two inked ribbons. Install one ribbon as follows:

1. Gently open the front cover of the time clock.
2. Localitzeu la ranura del cartutx de cinta.
3. Insert the new ribbon cartridge into the slot, ensuring it clicks into place.
4. Tanqueu la coberta frontal de manera segura.

5.4 Time Card Preparation

The time clock includes 100 time cards. These cards are two-sided:

• Blue Side: For the 1st to the 15th of the month.
• Orange Side: For the 16th to the 31st of the month.

Ensure employees use the correct side of the time card for the current period.

6. Instruccions de funcionament

6.1 Punching In/Out

1. Select the appropriate time card for the current period (blue for 1st-15th, orange for 16th-31st).
2. Insert the time card into the card slot at the top of the time clock.
3. The machine will automatically detect the card and print the current time and date.
4. Remove the time card after it has been stamped.

The time clock automatically marks late arrivals and early departures in red, simplifying payroll processing.

7. Manteniment

7.1 Substitució de la cinta

When the print quality deteriorates, it's time to replace the ink ribbon. Follow the steps outlined in Section 5.3 Ribbon Installation.

7.2 Neteja

• Wipe the exterior of the time clock with a soft, dry cloth.
• Do not use liquid cleaners or abrasive materials, as they may damage the device.
• Ensure no dust or debris accumulates in the card slot to prevent jamming.

8. Solució De Problemes

• El dispositiu no s'encén: Check if the power adapter is securely connected to both the time clock and the power outlet. Ensure the outlet is functional.
• No print or faint print: The ink ribbon may need replacement. Refer to Section 7.1.
• Time card not feeding correctly: Ensure the time card is inserted straight and not bent or damaged. Check for any obstructions in the card slot.
• Incorrect time/date displayed: Re-enter the setting mode and adjust the time and date as described in Section 5.2.
• Device not working during power outage: The built-in 800mAh rechargeable battery should keep the time clock operational during sudden power loss. If it's not working, the battery might be depleted or faulty.

9. Especificacions

10. Consells d'usuari

• Ensure time cards are inserted correctly and fully into the slot for accurate punching.
• Regularly check the ink ribbon for fading to ensure clear and legible prints.
• Keep a supply of spare time cards and ink ribbons on hand to avoid interruptions in attendance tracking.
• For optimal performance, place the time clock in a stable, dry environment away from direct sunlight or extreme temperatures.

11. Garantia i assistència

11.1 Informació de la garantia

This product comes with a 12-month manufacturer's limited warranty for defective items, excluding items damaged and/or misused after receipt. Accessories are covered by a 3-month warranty. Defective items must be reported and returned within the warranty period, preferably in their original packaging.

11.2 Atenció al client

If you have any questions, encounter issues, or require further assistance, please contact the store customer service staff where you purchased the product.

A detailed user manual in PDF format is also available for reference.

12. Informació de compliment

This product must comply with all applicable safety and regulatory requirements in the market where it is sold. Sellers are responsible for assessing which requirements and regulations apply based on the actual product type, function, and destination market.