1. Introducció
This manual provides detailed instructions for the setup, programming, operation, and maintenance of your Scimagic-RC 868.35MHz Garage Door Remote Control. This remote is designed for self-copy programming and is compatible with various garage door openers operating at 868MHz, 868.3MHz, or 868.35MHz, including models from Hormann, Marantec, and Berner.
2. Especificacions
| Característica | Descripció |
|---|---|
| Nom de marca | Scimagic-RC |
| Mètode de codificació | Fixed code (Self Copy) |
| Nombre de canals | 4 |
| Freqüència | 868 MHz/868.3 MHz/868.35 MHz |
| Botons | 4 |
| Tipus de bateria | CR1632 |
| Dimensions (L*W*H) | 53mm * 37mm * 10mm (approx. 5.5cm * 3cm * 1.2cm) |
| Certificació | RoHS |
| Origen | Xina continental |
| Compatible amb | HORMANN, MARANTEC, BERNER, BelFox 868MHz, EL V CONRAD FS20 S4, TOP 862NA/EE/EV, TOP 864NA/EE/EV |
3. Contingut del paquet
El vostre paquet ha de contenir els elements següents:
- 1 x Remote Control (Duplicator)
- 1 x CR1632 Battery (pre-installed or included)
- 1 x Clauer
- 1 x manual en anglès
4. Configuració i programació
This remote control uses a self-copy programming method. You will need your original working remote control to duplicate its code.
Vídeo Tutorial
Step 1: Clear the History Code from the Duplicator
- Press and hold buttons A (Lock) and B (Unlock) simultaneously until the LED flashes 3 times.
- Release button B (keep holding button A).
- Press button B slowly 3 times. The LED will flash rapidly, indicating that the existing code has been successfully cleared.
- Release button A. The duplicator is now ready for programming.
Step 2: Copy Code from Original Transmitter
- Place the duplicator remote control and your original remote control as close to each other as possible.
- Press and hold a button on your original transmitter.
- While still holding the button on the original transmitter, press and hold the corresponding button on the duplicator (e.g., if you pressed Lock on original, press Lock on duplicator).
- Continue holding both buttons until the duplicator's LED flashes rapidly. This indicates successful code duplication.
- Release both buttons. The code for that button is now copied.
- Repeat this process for any other buttons you wish to program.
5. Funcionament del comandament a distància
Once successfully programmed, simply press the corresponding button on the Scimagic-RC remote control to operate your garage door opener or other compatible device.
6. Manteniment
Canvi de bateria
The remote control uses a CR1632 battery. If the remote's LED does not light up or is dim when a button is pressed, the battery may need to be replaced. To replace the battery, carefully open the remote casing (usually by prying along the seam with a small flat-head screwdriver) and replace the old battery with a new CR1632 battery, ensuring correct polarity.
Neteja
Clean the remote control with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the casing o botons.
7. Solució De Problemes
- Remote not programming: Ensure the original code is cleared (LED flashes rapidly after Step 1). Make sure the original remote and duplicator are very close during Step 2. Try different buttons on the original remote if one doesn't seem to work.
- LED not flashing: Check the battery. Replace with a new CR1632 if necessary.
- Remote programmed but not working: Verify that your original remote control operates at one of the supported frequencies (868MHz, 868.3MHz, 868.35MHz) and uses a fixed code. Rolling code remotes are generally not compatible with this self-copy duplicator.
- Interferència: Ensure there are no strong radio frequency sources nearby that could interfere with the signal during programming or operation.
8. Consells d'usuari
No s'han trobat consells d'usuari específics a la informació proporcionada.views or Q&A content. However, users generally find the self-copy programming straightforward if the original remote is a fixed code type and the instructions are followed carefully.
9. Garantia i Suport
This product comes with a 1-year warranty from the store of purchase. For further assistance or detailed inquiries, please refer to the official user manual PDF or contact the manufacturer directly.
Informació del fabricant:
Fabricant: Shenzhen Scimagic Development Technology Co.Ltd
Adreça: Honghai Gebu Building 2301, Baoan Road, Songgang Baoan District, Shenzhen, Guangdong, China
For a comprehensive guide, you can view el Manual d'usuari (PDF).
