Alton Electric Bike DMHC TC490 Display User Manual

1. Producte acabatview

The Alton DMHC TC490 is an intelligent LCD display designed for electric bicycles. It serves as an instrument monitor, providing real-time data such as battery power, speed, and trip information. Its visual interface is designed for convenient riding.

Característiques principals:

• Clear LCD display for easy data viewing.
• Real-time battery power indication.
• Records power consumption.
• Intelligent error code display.
• Kilometer/mile unit selection for ODO/TRIP.
• Classificació impermeable IP65.

2. Informació de seguretat

⚠️ Disclaimer: Please be aware of potential fire risks associated with electrical components. Always follow the instruction manual strictly for charging and storage of your e-bike battery and related components.

Ensure all connections are secure and correctly installed to prevent electrical hazards. Do not attempt to modify the display or its wiring unless you are a qualified technician.

3. Configuració i instal·lació

Comprovació de compatibilitat:

• The display supports 24V, 36V, and 48V power supplies. Ensure your e-bike system matches one of these voltages.
• The display uses a UART communication protocol. Verify compatibility with your e-bike controller.
• The display connects via a 5-pin male connector.

Muntatge de la pantalla:

1. Identify a suitable position on your e-bike handlebars. The adjustable holder supports handlebar diameters up to 0.87 inches.
2. Loosen the mounting screw on the display holder.
3. Position the display on the handlebar and tighten the screw securely. Ensure the display is stable and does not obstruct other controls.

Connexió elèctrica:

1. Locate the corresponding 5-pin female connector on your e-bike's wiring harness.
2. Carefully align the 5-pin male connector from the display with the female connector and push them together until they click securely.
3. Ensure the cable (approximately 9.84 inches long) is routed safely and does not interfere with moving parts or get pinched.

4. Instruccions de funcionament

Funcionament bàsic:

• Botó d'engegada (⑂): Press and hold to turn the display ON/OFF. A short press may cycle through display modes or functions.
• Botó Plus (+): Typically used to increase assistance levels, navigate menus upwards, or increase values.
• Botó menys (-): Typically used to decrease assistance levels, navigate menus downwards, or decrease values.

Funcions de visualització:

The LCD display provides clear, real-time information:

• Indicador de bateria: Shows the current charge level of your e-bike battery.
• Visualització de velocitat: Shows current riding speed (Km/h or Mph).
• ODO/TRIP: Displays total odometer (ODO) and trip distance (TRIP). You can typically switch between these modes.
• Consum d'energia: Reflects real-time power usage.
• Codis d'error: Intelligent error codes are displayed to help diagnose system issues.

5. Manteniment

Neteja:

The display has an IP65 waterproof rating, meaning it is protected against dust and low-pressure water jets. To clean, gently wipe the screen and casing amb un suau, damp tela. No utilitzeu productes químics o materials abrasius.

Emmagatzematge:

When not in use for extended periods, store the display within its specified storage temperature range of -30℃ to 70℃ (-22°F to 158°F). Avoid extreme temperatures and direct sunlight.

Condicions ambientals:

The display is designed to operate in temperatures ranging from -20℃ to 60℃ (-4°F to 140°F).

6. Solució De Problemes

The Alton TC490 display features intelligent error code reporting to assist with diagnostics. If an issue arises, check the display for any error codes and consult your e-bike's main controller manual for specific code meanings.

Problemes comuns i solucions:

• La pantalla no s'encén:
  • Comproveu el nivell de càrrega de la bateria.
  • Ensure all electrical connections, especially the 5-pin connector, are secure.
  • Verify the e-bike's main power is on.
• Lectures incorrectes de velocitat/distància:
  • Check wheel size settings (if adjustable via display or controller).
  • Ensure speed sensor is clean and properly aligned.
• Codi d'error mostrat:
  • Note the specific error code.
  • Refer to your e-bike's controller manual for the meaning of the error code and recommended troubleshooting steps.
  • Si el problema persisteix, poseu-vos en contacte amb el servei d'atenció al client.

7. Especificacions

8. Consells d'usuari

• Comprovacions periòdiques: Periodically check the display's mounting and cable connections to ensure they remain secure, especially after riding on rough terrain.
• Visibilitat de la pantalla: The LCD is designed for clear viewing. If you experience glare, try adjusting the display angle or your riding position.
• Monitorització de la bateria: Pay attention to the battery indicator to plan your rides and avoid unexpected power loss.
• Error Code Awareness: Familiarize yourself with common error codes for your e-bike system to quickly identify and address potential issues.

9. Garantia i Suport

Informació de la garantia:

The seller aims to provide satisfactory products. If you are not satisfied with the product upon receipt due to defects, damage, or any fault of the seller (not due to personal preference or misuse), you may be eligible for a return within 7 days. Please contact the seller for specific return procedures. Note that return shipping costs may be borne by the buyer.

Atenció al client:

For any questions, problems, or assistance with your Alton DMHC TC490 display, please contact the seller directly. Providing your order number and, if applicable, images or videos of the issue will help expedite support.