Introducció
This manual provides instructions for the Scimagic-RC compatible remote control for HORMANN ECOSTAR garage door openers. This remote utilizes rolling code technology for enhanced security and operates at a frequency of 433.92MHz. It is designed to be compatible with specific HORMANN ECOSTAR remote control models and various garage door receiver models.
Exempció de responsabilitat important: Your existing remote control must be identical to the one shown in the product images, and your receiver model must be listed in the compatibility section below. Compatibility with other remotes is not guaranteed.
Especificacions
| Característica | Detall |
|---|---|
| Nom de marca | Scimagic-RC |
| Número de model | Hormann ecostar rsc2 433 |
| Mètode de codificació | Rolling Code |
| Freqüència | 433.92 MHz |
| Nombre de canals | 4 |
| Interval de treball | 10-50 metres (espai obert) |
| Font d'alimentació | 12V 27A / CR2032 (in-built) |
| Temperatura de treball | -20 °C a +50 °C |
| Tipus de programació | Programming with receiver |
| Dimensions (aprox.) | 54*30*14mm or 55*45*8mm (depending on variant) |
| Certificació | CE |
| Origen | Xina continental |
Compatible Remote Control Models:
- ECOSTAR RSC2-433
- ECOSTAR RSE2-433
Compatible Receiver Models:
- Liftronic 500
- Liftronic 700
- Liftronic 800
- Portronic D5000
- Portronic D2500
- Portronic S4000
Image: Detailed specifications including frequency, code type, channels, range, power supply, and operating temperature.
Image: Various product certifications such as RoHS, CE, and FCC.
Contingut del paquet
El paquet del producte normalment inclou els elements següents:
- 1x comandament a distància
- 1x Battery (in-built)
- 1x clauer
- 1x manual d'anglès
Vídeo: Un unboxing i mésview of the remote control and its included accessories.
Configuració i Programació
To program your new remote control, you must have access to your garage door opener's receiver. The programming process involves interacting directly with the receiver unit.
Image: Illustrates holding the remote control near a Hormann ProLift garage door opener, indicating its use.
Image: Demonstrates the remote control being used to program a garage door opener, emphasizing the 'Program On Receiver' method.
Passos de programació:
- Localitza el receptor: Open your receiver unit, typically found under the motor cover of your garage door opener or in a separate control box next to the motor.
- Activa el mode de programació: Press the programming button on the receiver. This button is usually labeled 'ENR', 'MEMO', or 'PROG'. On some receivers, you may need to hold down the programming button for a few seconds.
- Observeu l'indicador LED: The LED on the receiver will indicate when it has entered programming mode (e.g., it might light up, flash, or change color).
- Transmit from New Remote: Press a button on your new remote control for one second, then release it.
- Confirma la programació: The receiver's LED will change its behavior (e.g., light differently or turn off) to confirm successful programming.
- Sortir del mode de programació: Espereu uns segons perquè el receptor surti automàticament del mode de programació.
Your new remote control is now programmed and ready for use.
Instruccions de funcionament
Un cop programat, el comandament a distància és molt senzill:
- Press any of the programmed buttons on the remote control to activate your garage door or gate opener.
- Ensure you are within the effective working range of 10-50 meters (in open space) for optimal performance.
Image: Illustrates the remote control's versatility for various door types (furniture, main, garage, courtyard) and its operating frequency and range.
Image: Shows a hand using the 4-button remote control to operate an outdoor gate.
Manteniment
Canvi de bateria
The remote control is powered by a 12V 27A or CR2032 battery. If the remote's indicator light does not illuminate or its range decreases significantly, it may be time to replace the battery.
Image: Step-by-step visual instructions for opening the remote and replacing the CR2032 battery.
- Obriu amb cura el comandament a distància casing.
- Traieu la bateria CR2032 antiga.
- Inseriu una nova bateria CR2032, assegurant la polaritat correcta.
- Tanqueu el comandament a distància casing de manera segura.
Normalment no cal reprogramar després de substituir la bateria.
Resolució de problemes
- Remote not responding after programming:
- Ensure you have full access to your receiver/opener and followed all programming steps correctly.
- Check the receiver's LED feedback during programming to confirm it entered and exited programming mode successfully.
- Verify that your old remote is indeed the same model as advertised and that your receiver is on the compatible list.
- Rang de funcionament limitat:
- Substitueix la pila del comandament a distància.
- Assegureu-vos que no hi hagi obstacles importants entre el comandament a distància i el receptor.
- Remote indicator light not working:
- Pot ser que la bateria estigui esgotada. Substitueixi la bateria.
Consells per a l'usuari
- Always ensure you have physical access to your garage door opener's receiver before attempting to program a new remote. This is crucial for successful pairing.
- Note the dimensions of your remote (either 54*30*14mm or 55*45*8mm) to ensure you have the correct variant for any accessories or cases.
- Keep the remote in a safe, dry place to prolong its lifespan.
Garantia i Suport
This product typically comes with a 1-year warranty from the store of purchase, covering manufacturing defects. For any issues or support inquiries, please refer to your purchase documentation or contact the seller directly.
