Introducció
The Kebidumei X1 Plus is a Bluetooth motorcycle intercom helmet headset designed for clear and reliable communication between two riders. Featuring Bluetooth 5.0 technology, IPX6 waterproofing, and advanced noise reduction, it ensures a seamless communication experience up to 1000 meters. This manual provides detailed instructions for setup, operation, and maintenance of your X1 Plus headset.
Producte acabatview
Components i controls
- Botó d'encesa: Long press to power on/off. Short press to play/pause music, answer/hang up calls.
- Mode Key (M): Short press to switch between Bluetooth mode and Intercom mode. Long press to restart Bluetooth/intercom pairing.
- Volum+/Pista següent: Short press to increase volume. Long press for next song.
- Volume-/Previous Track: Short press to decrease volume. Long press for previous song.
- Llum indicadora:
- Blue flashing: Waiting for pairing.
- Solid blue: Paired successfully.
- Red: Low power or charging.
- Green flashing: Paired with a remote control (optional accessory).
- Forat de càrrega: Port micro USB per a la càrrega.
- Presa d'altaveu/micròfon: Connects the speaker and microphone assembly.
Dimensions
Contingut del paquet
Marqueu la casella per als elements següents:
- X1 Plus Intercom Unit(s)
- Headphone Mount (with 3M adhesive)
- Speaker Stickers (2 pcs)
- Microphone (either hard mic or soft mic, depending on your selection)
- Coixinet de preparació d'alcohol
- Cable de càrrega USB
- Manual d'usuari
- Targeta de garantia
Guia d'instal·lació
The X1 Plus headset is designed for easy installation on various helmet types. Choose the appropriate microphone type (soft or hard) based on your helmet.
- Install Headphone Mount:
- Tear off the 3M adhesive paper from the headphone mount.
- Stick the mount firmly on the left side of your helmet. Do NOT remove it arbitrarily after pasting. Maximum viscosity is achieved after 24 hours.
- Clip the intercom unit onto the fixed mount. A "click" sound indicates it is fixed in position.
- Instal·lar altaveus:
- Peel off the speaker stickers and attach them inside the helmet's ear bags.
- Place the speakers onto these stickers, ensuring they are centered over your ears for optimal sound.
- Instal·lar el micròfon:
- Peel off the microphone sticker and attach it to the left side of the inward helmet.
- Secure the microphone, ensuring it is positioned 1-2 cm away from your mouth for the best audio quality.
- Connectar els cables:
- Connect the speaker and microphone cable plug into the corresponding jack on the intercom unit.
Nota: The package contains either an outer (hard) microphone or a hidden (soft) microphone, not both. Choose the one suitable for your helmet type.
Guia d’operacions
Encès/apagat i càrrega
- Encès: Premeu llargament el botó d'engegada durant 2 segons.
- Apagar: Premeu llargament el botó d'engegada durant 2 segons.
- Càrrega: Connect the micro USB cable to the charging hole. A red light indicates charging; the light turns off when fully charged (charging time is typically less than 2 hours).
Bluetooth Connection (Pairing with Phone)
- From Device Off: Power on the device. The LED indicator will flash, and the device will enter Bluetooth mode, waiting for pairing.
- From Intercom Mode: Short press the 'M' key. You will hear "Bluetooth mode". The device will then be ready for pairing.
- On your phone, search for Bluetooth devices and select "E1".
- Once successfully connected, the blue LED light will remain solid.
- To connect to another device, power off the first device (you will hear "disconnected"), then power on the new device and repeat the pairing process.
Reproducció de música
After successfully connecting to your phone via Bluetooth, the headset functions as a Bluetooth headphone.
- Pujar el volum: Premeu breument el botó Volum+.
- Següent cançó: Premeu llargament el botó Volum+.
- Baixar el volum: Premeu breument el botó de volum.
- Cançó anterior: Premeu llargament el botó de volum.
- Reproduir/pausa: Premeu breument el botó d'engegada.
Trucades mans lliures
When connected to your phone, you can manage calls directly from the headset.
- Resposta / Penjar: Premeu breument el botó d'engegada.
- Rebutja la trucada: Premeu llargament el botó d'engegada.
- Torna a marcar l'últim número: Premeu dues vegades el botó d'engegada.
Intercom Mode (Rider-to-Rider Communication)
- Initiate Intercom Pairing:
- Power on both X1 Plus devices.
- Short press the 'M' key on both devices to switch to intercom mode. You will hear "intercom mode".
- Long press the 'M' key on either device. You will hear "paired", indicating the two devices are connected and ready for communication.
- If the devices were previously paired, they will automatically connect without needing to long press the 'M' key.
- Delete Paired Records:
- In intercom mode, long press the 'M' key. You will hear "waiting for pairing", indicating old pairing records have been deleted.
Activate Smart Voice System (Siri, Google Assistant, etc.)
The headset supports activation of your phone's smart voice assistant. Specific activation method (e.g., double-tap power button, specific button press) is usually detailed in the full user manual or by your phone's settings. Ensure your headset is powered on and connected to your phone.
Consells d'àudio
- "Power off": Device is powering off.
- "Bluetooth Mode": Device has entered Bluetooth mode and is waiting for pairing.
- "Intercom Mode": Device has entered intercom mode and is waiting for pairing.
- "Paired": Device has successfully paired in either Bluetooth or intercom mode.
- "Disconnected": Device has disconnected and is re-entering pairing mode.
- "Low battery": Device has less than 20% power. This alert repeats every 3 minutes if not charged. Approximately 1 hour of working time remains after this alert.
Especificacions
| Característica | Especificació |
|---|---|
| Nom del model | X1 Plus (E1) |
| Versió Bluetooth | V5.0 |
| Protocol Bluetooth | HSP, HFP, A2DP, AVRCP |
| Distància màxima d'intercomunicació | 1000m (between 2 riders) |
| Nombre màxim de parlants | 2 |
| Tipus de casc aplicable | Half Helmet, Open Face, Full Face, Universal |
| Mode d'alimentació | Bateria incorporada |
| Tipus de bateria | Bateria de liti |
| Capacitat de la bateria | 3.7 V / 800 mAh |
| Temps de càrrega | ≤ 2 hores |
| Temps de treball | Approx. 8 hours (Call Time: 12 hours) |
| Temps d'espera | ≥ 240 hours (up to 1000 hours as per some indications) |
| Nivell impermeable | IPX6 |
| Pes del producte | 44 g (± 0.5 g) |
| Mida del producte | 103 × 50 × 26 mm |
| Certificació | CE, CCC |
Manteniment
- Neteja: Netegeu els auriculars amb un drap suauamp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.
- Emmagatzematge: Guardeu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.
- Cura de la bateria: Per allargar la durada de la bateria, eviteu descarregar-la completament amb freqüència. Carregueu el dispositiu regularment, fins i tot si no l'utilitzeu durant períodes prolongats.
- Exposició a l'aigua: While the device is IPX6 waterproof, avoid submerging it in water or exposing it to high-pressure water jets. Ensure the charging port cover is securely closed when not charging.
Resolució de problemes
- El dispositiu no s'encén:
- Ensure the battery is charged. Connect the device to a power source using the USB charging cable and allow it to charge for at least 30 minutes before attempting to power on again.
- Cannot pair with phone via Bluetooth:
- Make sure the headset is in Bluetooth pairing mode (blue LED flashing).
- Ensure Bluetooth is enabled on your phone and it is discoverable.
- Try restarting both the headset and your phone.
- If previously paired, try deleting the "E1" entry from your phone's Bluetooth list and re-pairing.
- Intercom not connecting between two devices:
- Ensure both devices are powered on and in intercom mode ("intercom mode" audio tip).
- Try long pressing the 'M' key on one of the devices to initiate pairing.
- If they were previously paired, try deleting old paired records by long pressing the 'M' key in intercom mode until you hear "waiting for pairing", then re-initiate pairing.
- Ensure devices are within the 1000m communication range and there are no significant obstacles.
- No hi ha so o hi ha mala qualitat de so:
- Comproveu els nivells de volum tant dels auriculars com del dispositiu connectat.
- Ensure the speaker and microphone cables are securely connected to the headset.
- Verify that the speakers are correctly positioned over your ears and the microphone is 1-2 cm from your mouth.
- For intercom, ensure both units are properly paired and within range.
- "Low battery" audio tip:
- The battery level is below 20%. Connect the headset to a power source immediately to charge it.
Consells per a l'usuari
- Compatibilitat amb el casc: The soft microphone is generally better for full-face and rally helmets, while the hard microphone is suited for half-face, open-face, and retro helmets. Choose the correct type for optimal performance.
- Ús de l'intercomunicador: The X1 Plus is designed for two-person intercom. Each unit functions as an independent intercom, allowing two riders to communicate directly.
- Adherència d'instal·lació: For best results, allow the 3M adhesive on the mount to cure for 24 hours before attaching the intercom unit. This ensures maximum viscosity and a secure fit.
- Sensació del botó: The physical pressure buttons are designed to be easily operated even with gloves on, reducing accidental presses and improving usability while riding.
Garantia i Suport
For detailed warranty information and customer support, please refer to the official user manual provided with your product. A digital version of the user manual (PDF) can be accessed aquí.