1. Introducció
Thank you for choosing the P50 TURBO RACING 91805 RC Four-channel Remote Controller and its compatible RX41/RX49 Receivers. This system is designed for precise control of model cars and boats, offering a reliable 2.4G connection and a detachable, folding mini design for convenience. The receivers feature high efficiency and waterproof capabilities, ensuring durability and performance in various conditions.
2. Informació de seguretat
Please read and understand all safety instructions before operating this product. Failure to do so may result in injury or damage to the product or property.
- Always operate your RC model in a safe and open area, away from people, pets, and obstacles.
- Never operate your RC model near public roads or in crowded areas.
- Keep the remote controller and receiver away from water and moisture, unless the component is specifically rated as waterproof.
- Ensure batteries are correctly installed and charged according to their specifications.
- Do not attempt to modify or disassemble the product, as this may void the warranty and cause malfunction.
- Es recomana la supervisió d'un adult per a usuaris menors de 14 anys.
3. Contingut del paquet
Depending on your selection, your package may include:
- P50 TURBO RACING 91805 Remote Controller
- Receptor RX41
- RX49 with Gyroscope Receiver
Please inspect all items upon receipt to ensure they are complete and undamaged.
4. Configuració
4.1 Instal·lació de la bateria del comandament a distància
The P50 remote controller features a split design, with the battery compartment located in the handle. It requires 4 AA batteries for power.
- Locate the battery compartment cover on the handle of the remote controller.
- Feu lliscar o desenganxeu la tapa per obrir el compartiment.
- Inseriu 4 piles AA, assegurant la polaritat correcta (+/-).
- Tanqueu bé la tapa del compartiment de la bateria.
4.2 Connexió i vinculació del receptor
The RX41 and RX49 receivers are designed for use with model cars and boats. The RX49 includes a gyroscope for enhanced stability.
- Connect the receiver to your model's Electronic Speed Controller (ESC) and steering servo according to your model's specific wiring diagram. Ensure the receiver's operating voltage (4-8.4V) is compatible with your model's power system.
- Power on your model (with the receiver connected). The receiver's indicator light should flash, indicating it's in binding mode or unlinked.
- Turn on the P50 remote controller.
- Press and hold the binding button (if present on the receiver, or follow specific binding instructions for your model/receiver combination) until the receiver's indicator light becomes solid, indicating a successful bind.
- Test the controls (steering and throttle) to ensure proper function before operating your model.
5. Instruccions de funcionament
The P50 remote controller offers a button-style panel for convenient and user-friendly operation, especially for value adjustments compared to traditional knob operations. It utilizes 2.4G spread spectrum technology for strong anti-interference and provides flexible control with a stable distance of up to 120m. It also includes a brake and out-of-control protection function.
5.1 Remote Controller Layout and Functions
| Component | Funció |
|---|---|
| Antenna (天线) | Transmits 2.4G signal to the receiver. |
| Indicator Light (指示灯) | Indica l'estat d'alimentació i connexió. |
| Steering Wheel (转向调轮) | Controls the left and right steering of the model. |
| Throttle Trigger (油门触发器) | Controls forward/reverse movement and speed. |
| Power Switch (电源开关) | Turns the remote controller ON/OFF. |
| Detachable Button (拆卸按键) | Releases the handle for folding/detaching. |
| Throttle Accelerator (油门加速器) | Adjusts throttle response or maximum speed. |
| Throttle Trim (油门微调) | Fine-tunes the neutral position of the throttle. |
| Steering Trim (转向微调) | Fine-tunes the neutral position of the steering. |
| Reverse Adjustment (反向调整) | Reverses the direction of a channel (e.g., steering or throttle). |
| Channel 3/Channel 4 EPA+ (通道3/通道4 EPA+) | Adjusts the End Point Adjustment (EPA) for Channel 3 or 4 in the positive direction. |
| Channel 3/Channel 4 EPA- (通道3/通道4 EPA-) | Adjusts the End Point Adjustment (EPA) for Channel 3 or 4 in the negative direction. |
| Channel 4 (通道4) | Controls the fourth channel function (e.g., lights, auxiliary functions). |
5.2 Practical and Multi-functional Features
The remote controller supports various functions for enhanced control:
- EPA Function (3/4 Channels): Allows adjustment of the maximum travel (end points) for channels 3 and 4, preventing over-travel of servos or other controlled components.
- REV Function (1/2/3 Channels): Enables reversing the direction of operation for channels 1, 2, and 3, useful for correcting servo direction without physical re-wiring.
6. Manteniment
- Neteja: Use a soft, dry cloth to clean the remote controller and receivers. Do not use harsh chemicals or solvents.
- Emmagatzematge: Store the product in a cool, dry place away from direct sunlight and extreme temperatures. Remove batteries from the remote controller if storing for extended periods to prevent leakage.
- Receiver Care: While the receivers are waterproof, avoid prolonged submersion or exposure to corrosive liquids. Ensure all connections are clean and secure.
7. Solució De Problemes
- No Power to Remote Controller: Check if batteries are installed correctly and are not depleted. Replace with fresh AA batteries.
- Cap resposta del model: Ensure the remote controller and receiver are properly bound. Check all wiring connections between the receiver, ESC, and servos. Verify that the model's battery is charged.
- Rang de control curt: Ensure the remote controller's antenna is fully extended and not obstructed. Check for sources of interference (e.g., other 2.4G devices, large metal objects).
- Control erràtic: Re-bind the remote controller and receiver. Check for loose connections or damaged wires. If using the RX49, ensure the gyroscope is calibrated correctly (refer to your model's specific instructions if applicable).
8. Especificacions
| Característica | Detall |
|---|---|
| Tipus | Transmitter (Remote Controller) |
| Número de model | P50(91805G-VT) |
| Freqüència de funcionament | 2.4 GHz |
| Nombre de canals | 4 canals |
| Remote Controller Input Voltage | 6V (4 x AA batteries, not included) |
| Receiver Operating Voltage | 4-8.4V |
| Característiques del receptor | Waterproof, Mini body (RX49 includes gyroscope) |
| Dimensions (Remote Controller) | 151.1 * 193.7 * 81.3 mm |
| Material | Material compost |
| Aplicable per | Model Cars, Model Boats |
| Edat recomanada | 6-12 anys, 14+ anys |
9. Consells d'usuari
- This product is excellent for children to experience four-wheel drive excitement and develop skills in assembly and remote control operation.
- The turbo racing design and composite material construction contribute to its performance and durability.
- Consider upgrading the remote controller or receiver components for enhanced functionality as your skills advance.
10. Garantia i Suport
Per obtenir informació sobre la garantia i assistència tècnica, consulteu les polítiques del venedor o poseu-vos en contacte amb el punt de compra. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.
